|
|
Lonero Engineering Co
61ZE1227-525-D5
|
Rollers, 14mmD. Work rollers, material: CPM REX 76. Tips 4.4mm thick with 3.0mm flat top. Lonero Engineering - Deep Rolling Tool Specialists.
|
Un-used but old
|
$4.95
|
|
|
|
Techcon Systems
SE30-1/2-50
|
Stainless steel blunt dispensing tips, 30AWG x 1/2". Color: light purple. Package of 50.
|
In Mfr Packaging
|
$4.50
|
|
|
|
Techcon Systems
SE18-1-50
|
Stainless steel blunt dispensing tips, 18AWG x 1". Color: light green. Dimensions: 0.84mm-ID, 25mm-Long. Package of 50.
|
In Mfr Packaging
|
$4.50
|
|
|
|
OK Industries
S9-305S
|
Soldering iron tip. Double flat 0.047" (1.19mm). For use with Macro Iron solder stations K455, K337.
|
New (un-used)
|
$5.00
|
|
|
|
ECG/Philips
PR31
|
Logic Pulser probe, compatible with most logic families. Switchable pulse rate: 0.5/400Hz. Direct signal injector, square wave. Circuit powered. External sync input. Sources/Sinks 100mA pulses. For use with logic probe or oscilloscope.
|
In Mfr Packaging
|
$19.95
|
|
|
|
Techcon Systems
SE26-1/2-50
|
Stainless steel blunt dispensing tips, 26AWG x 1/2". Color: light beige. Package of 50.
|
In Mfr Packaging
|
$4.50
|
|
|
|
EDSYN
ZD505
|
Soldapaullt. Self-contained 120VAC 60Hz 70 watt, hot tip desoldering station. Requires a shop vacuum. Complete with head assembly, instruction manual and 3 conductor power cord. Complies with Mil-S-45743E, MIL-S-2000, DOD-STD-2000-1B, WS6536E and ESD Spec, DOD-STD-1686, DOD-HDBK-263.
|
In Mfr Packaging
|
$449.99
|
|
|
|
Unmarked
9-042
|
Hardware, drill bit. Carbide #59. Shank is 0.125", overall 1.48" long. Used for drilling PC boards.
|
New (un-used)
|
$1.00
|
|
|
|
CBB
8-226
|
Anti-Sparking tool. For springs and typewriters in hazardous locations? Material: bronze. Each 0.188" D x about 6" long. One has a sharp hook and a sharp flat point and the other tool has a fork and a rounded end. Quite unique and handy, comes in it's own plastic pocket pouch.
|
Un-used but old
|
$2.95
|
|
|
|
American Bosch
ACB-10A-1314
|
Hydro-Pneumatic Accumulator. Gas volume: 229 cubic inches. Precharge pressure: 1500-psi. Max working pressure: 5,000-psi at 250F. Burst: 20,000-psi. Inert gas Only. Approximately 5.75"D x 20"L. Old, dirty, little rust and very heavy.
|
Used
|
$175.00
|
|
|
|
3M
CTC330-WW
|
Iron Man Overvoltage Soldering Iron Workstation Monitor. Whenever a soldering iron, tweezers or other type tool touches the grounded pad of a board, the 3M Iron Man Monitor will alarm if overvoltage on the board is detected. High or Low selectable alarms: High sensitivity 0V to +/-5V. Low sensitivity 0V to +/-50V. Complete with universal 120/240Vwall adapter power supply and instructions. P/N 80-0009-1885-6.
|
New (un-used)
|
$74.88
|
|
|
|
Unmarked
Micrometer Head - metric
|
0-25mm metric micrometer head. Graduations 0.01mm, With Locknut. About 4" long. ball head, we believe it's MITOYO 148-series
|
Un-used but old
|
$25.00
|
|
|
|
OSCA AUTOMAZIONI
ANNO 2000
|
18" Vibrator 60Hz. Diameter: 18.5" x 9.5"H. Large and heavy. 220V 60Hz 880VA 3600-vibrations per minute. Approximately 100-pounds. CE 4.36/1s.
|
Used
|
$388.00
|
|
|
|
NIKKEN
CAT50-C1-1/4H-105U
|
Chuck, milling. Ultra-Lock. CNC. Capacity: 0.187-1.250". Shank: CAT 50. Collett: KM 1-1/4. 10.25"L overall. With (1) 1 3/4" end mill. Weighs 12 lbs unpacked.
|
Used
|
$274.88
|
|
|
|
Trex-Onics
TPC74705
|
Nutrunner cable. Connector assembly. 18/5C-slhd + 22/4C-SHLD + 22/11C O/A Shield, 300V 90 Deg C. With attached heavy duty M-F 20 position connector. Length 5 Meter. Note: Fits - Atlas Copca. Alt P/N: TPC74705 or 23923-09. More info: http://www.tpcwire.com/images/TPC_Catalog/23_Nut_Runner_Assemblies.pdf
|
New (un-used)
|
$178.88
|
|
|
|
URYU
BRH-1UVR
|
Hand Tool. Pneumatic Riveting Hammer. BRH-1UVR. 2800-BPM, with two coils and regulator knob. Air hose supply: 1/4"NPT, use 3/8-ID hose. Air pressure: 85-PSI (6kg/cm2). Weight: 5 lbs. NIB.
|
New (un-used)
|
$349.95
|
|
|
|
VALENITE
VPBPC6-PC3R3
|
Milling Tool Holder 18mm bore, 36mm SHANK, 18mm Bore. 5-1/4" Overall Length. Arbor.
|
New (un-used)
|
$169.88
|
|
|
|
3M
048011-32876
|
Hardware, abrasive disc. High strength Disc TSM, A-Medium Grade, Max RPM: 12,000. Has a metal washer for "Roloc" fitting.
|
New (un-used)
|
$2.50
|
|
|
|
FETTE
E10A01X106
|
Massive 9.45 pound Fixture on 1" steel shaft 2.3" long.3.94" diameter x 4.2" high excluding shaft. Marked: FETTE Nr E 10-177 (Adjustable 0 - 8 units, about 1.5") attached by three 0.63"dia rods to the best part: E 10A01 X106 M8-M10 3/8 Feingewinde 8-14mm 5/16 - 9/16. Made in Germany - Impressive! with various small tools, allen wrenches, etc.
|
Good
|
$335.00
|
|
|
|
DR. Kaiser
NC13298/1-2
|
Diamond dressing disc's. Pair. Diameter: 8-5/8". Thickness 0.362 overall, 0.180 cutting surface. Beveled. 20 degree - R0.3 - 12/472 Numbers on disc#2: RIX 11590 009ZF17 TN 102295 525045. 8 Mounting holes, 1.56" ID. Two in a padded wooden case, drawing clear taped on top. Weight 19 lbs. Note: Used. DR Kaiser/Munson.
|
Good
|
$195.00
|
|
|
|
FEDERAL
M-23541
|
Fixture, heavy (5.4 pounds). Includes two allen wrenches to make adjustments. 3" wide x 2.5"deep x 5.5"high. Application unknown. Excellent condition MTI Boice, Division of Mechanical Technology in Hyde Park, NY. FEDERAL, an ESTERLINE Company.
|
New (un-used)
|
$50.00
|
|
|
|
Winter
5UZ71P-100-39 PD-1119-18NC
|
Reverse-Plated 25-mesh Rotary Diamond Dresser - 4" Precision Full-Bullnose Diamond Grinding Wheel, Roller Dresser 2.02"-ID 1.7"wide - with spec sheet, profile-print-out from the factory in W Germany. In it's own tongue and groove wooden Treasure Chest - WINTER USA - Was listed as NEW but DR says slightly used -=- uses FLOOD COOLANT -=- NON-DASH SEGMENTED
|
Good
|
$498.89
|
|
|
|
Winter
3UZ71P-100-39
|
Non-Segmented Roll Wheel Dresser - Reverse Olated Rotary Diamond Dresser - 25 mesh - Precision Full-bullnose Diamond Grinding Wheel - 4" OD 2" ID 1.7"wide - In a nice tongue&groove Treasure Chest made & shipped from West Germany - Uses Flood Coolant
|
Good
|
$448.89
|
|
|
|
SPECTRONICS
PE140T/F
|
Eprom Eraser. Made for use in United Kingdom, 230VAC 50Hz, 0.17Amp with a UK style male plug. Will handle up to (9) 24-Pin eproms. Has a timer for Auto shut-off. NIB, complete w/instruction sheets.
|
In Mfr Packaging
|
$125.00
|
|
|
|
Unitek
1-124-04
|
Unibond Welding Power Unit - for parts only, missing discharge capacitors and maybe more.
|
Used
|
$22.50
|
|
|
|
Unmarked
8-982
|
T8 Torque Bits Stamped T8 USA
|
Un-used but old
|
$0.35
|
|
|
|
KESTER
7-220
|
Solder. Acid core. Metal Mender solder. 40% Tin / 60% Lead. 0.080"D. 1 ounce.
|
New (un-used)
|
$1.00
|
|
|
|
Amp Inc
69710E
|
Hand tool. Straight action "C" head. Ratcheting. Mod D for termashield ferrules.
|
Used
|
$145.00
|
|
|
|
Warner Electric
SV3402-01000
|
AC Motor Drive. For 2HP 380-460V AC induction motors, NEMA type B. 12-Key control keypad, 2-line 16-character alphanumeric display. RS485. Internal dynamic braking. Constant torque. Output Voltage: 0 - input. Output frequency: 0 - 120Hz, 0.02Hz increments. Seven preset speeds, three Skip frequencies and Windows. Selection modes include "catch a spinning motor" selection. With 92-page manual. New, in box. Input: 380-460V +/-10% 3-phase.
|
In Mfr Packaging
|
$1,249.95
|
|
|
|
Honeywell/Microswitch
CRS301
|
Color Recognition System. 400-800nM, 8-Channels. Color Recognition Sensor with MS-connector cable, 4 armoured 32" Fiber Optic cables: CRS-FO-25-3 (bifurcated), CRS-FO-55-TSR-3, CRS-FO-55-TSE-3, and CRS-FO-55-3 (bifurcated). 3.5" Disk CRS 301-CFG-SFT V2.10 software. Designed for the industrial environment, not just the laboratory bench. Accurately memorizes up to eight different colors for recognition on-line. Sensitive across the entire visible light spectrum 400 to 800 nanometers to characterize colors, not just red, blue & green. Internal light source. Current sink/source output provided for each channel.
|
Un-used but old
|
$375.00
|
|
|
|
215-169A-2-90
|
Regulator, air pressure. Manifold. 1.43" x 1.50" x 4.3"L. With hardware.
|
New (un-used)
|
$44.95
|
|
|
|
Stelron Components
DS5-3-C
|
Slide, linear. Anti-friction, double bar. 3" travel. Ball-bearings, hardened & ground steel dual shafts. 3 x 3.25 x 1". Thick black anodized housing and end plates. Size: 180mmL x 77mmW x 25.5mmH overall. Weighs 33-oz before packing.
|
Used
|
$88.95
|
|
|
|
3M
33849-A300
|
Hardware, abrasive disc. Trizact - Hook-it. Dimensions: 127mm x NH (5 in x NH). A300 Grit.
|
New (un-used)
|
$2.00
|
|
|
|
K-FAST
KMV2503
|
Nutrunner head, 17mm. New.
|
New (un-used)
|
$175.00
|
|
|
|
Buffalo Dental Mfg
20M
|
Doriot Two pulley custom straight handpiece dental equip 20,000RPM
Japan
|
New (un-used)
|
$165.00
|
|
|
|
EUREKA Welding Alloys
ULTRA T 505
|
10 Pound Box EUREKA ULTRA T 505 WELDING RODS 3/32" [2.4mm] x 9"Long Heat Number 342 GH - SEALED IN BOX
|
Un-used but old
|
$0.00
|
|
|
|
POWER Components Inc
Power Lift 5B
|
Rack & Pinion Double Lifter - Metric. At least 400-pound capacity, Power Lift Actuators convert Linear to Rotary ~~~ or Rotary to Linear motion when connected with a power source such as a motor or air cylinder. Note: Work order number stamped W05-3319750001.
|
New (un-used)
|
$260.00
|
|
|
|
Siemens
8WD4308-0DE
|
Contact Box with Magnetic Base - AnschluBdose mit Magnathalter - Rubber coated Strong magnet 2.6" / 3mm diameter x 1.8" tall. original part number obscured, 2'd charater "W" may be wrong - with four screws. Sealed package before picture was taken.
|
Un-used but old
|
$69.00
|
|
|
|
LANE PUNCH CORP
BRHT-13
|
Ball-Lock Retainer Heavy-Duty (BRHD) Tru-Lock TM Conforms to NAAMS-ISO. Triangular nitride treated. Simple typical mounting: 1. Drill and tap for two (2) screws. 2. Drill and ream (or bore) for dowels. 3. Insert dowels into die plate, slip retainer onto dowels and tighten screws. 50x48mm x 41mm-high provide their user improved performance. Feature positive lock to retainer. Reduce maintenance and downtime. Prevent stripper from falling into die during use. Fit both Ball-Lock and Shoulder punches.
|
New (un-used)
|
$55.88
|
|
|
|
Stewart Connector Systems
2940231-01
|
Ratchet style hand tool. No terminating die set included. Tool incorporates an eccentric axle and addjustment wheel for trained personnel to re-calibrate. With instruction sheets. made in Sweden.
|
In Mfr Packaging
|
$78.98
|
|
|
|
OK Industries
HVL-BF
|
HVL BAG FILTER
|
In Mfr Packaging
|
$10.00
|
|
|
|
Xcelite
XTD27V
|
Hand Tool. TORX screwdriver 4-1/2"/(105mm)E. XTD27V. N/S No 48812.
|
New (un-used)
|
$6.00
|
|
|
|
PLATO PRODUCTS
MS-157
|
Tools,
solder tips. 2.3mm D. Overall 27.7mm with mount 3.9mm OD/2.8mm ID. Alternate: Weller PTDD9 0.18", 900 DegF.
|
New (un-used)
|
$1.99
|
|
|
|
Unmarked
MS-156
|
| Tools,
solder tips. 1.5mm D. Overall 28.6mm with mount 4mmOD/2.7mm ID. Alternate: Weller PTDD9 0.18", 900 DegF.
|
New (un-used)
|
$1.99
|
|
|
|
Unmarked
3365
|
Soldering equipment. Brazing Rod 1/16 x 20 SP15. Package of 12.
|
New (un-used)
|
$15.99
|
|
|
|
Amp Inc
220190-1-A
|
Hand tool. Crimper. Crimpex.
|
New (un-used)
|
$50.00
|
|
|
|
Amp Inc
91066-3
|
Tools. Insertion/Extraction. Size: 16.
|
New (un-used)
|
$9.99
|
|
|
|
WELLER
LIA
|
Soldering tools. Single flat tip 1/16" x 1.6mm.
|
New (un-used)
|
$5.00
|
|
|
|
WELLER
ETA
|
Soldering tools. Screwdriver tip 0.062" (1.60mm).
|
New (un-used)
|
$5.00
|
|
|
|
WELLER
DS114
|
Soldering tools. Desoldering tip 0.125" (3.17mm). Replacement part to fit modules DS102/DS601.
|
New (un-used)
|
$9.99
|
|