|
|
Allis-Chalmers
FH14
|
Heater. Overload thermal heating element 0.87-0.95Amp.
|
New (un-used)
|
$8.99
|
|
|
|
Allis-Chalmers
FH76
|
Heater. Overload thermal heating element 27.9-30.6Amp. Note: maybe replaced with FH76A.
|
New (un-used)
|
$8.99
|
|
|
|
Allis-Chalmers
FH57
|
Heater. Overload thermal heating element 36.10-38.90Amp.
|
New (un-used)
|
$8.99
|
|
|
|
Allis-Chalmers
FH75
|
Heater. Overload thermal heating element 25.3-27.8Amp.
|
New (un-used)
|
$8.99
|
|
|
|
Allis-Chalmers
FH58
|
Heater. Overload thermal heating element.
|
New (un-used)
|
$8.99
|
|
|
|
Allis-Chalmers
FH16
|
Heater. Overload thermal heating element 1.05.-1.14Amp.
|
New (un-used)
|
$8.99
|
|
|
|
Allis-Chalmers
FH56
|
Heater. Overload thermal heating element 33.4-36.0Amp.
|
New (un-used)
|
$8.99
|
|
|
|
Allis-Chalmers
FH77
|
Heater. Overload thermal heating element 30.7-33.5Amp.
|
New (un-used)
|
$8.99
|
|
|
|
Allis-Chalmers
FH12
|
Heater. Overload thermal heating element 0.71-0.78Amp.
|
New (un-used)
|
$8.99
|
|
|
|
ABB
CBK-RB
|
ABB Reset button. Black button with "RESET" engraved legend.
|
In Mfr Packaging
|
$14.00
|
|
|
|
Ward Leonard
5019-3901-14
|
Starter, Magnetic, 3PH. Size 00, Coil: 110VAC 60cy. One normally open auxiliary contact. Two pole overload assembly. (No overload heaters included) Mount: Panel. Open frame.
|
In Mfr Packaging
|
$150.00
|
|
|
|
Oriental Motors
4GK30KA
|
Motor, gear head. Ratio 30:1, Size 4. PACKAGE OF 1.
|
New (un-used)
|
$80.00
|
|
|
|
Oriental Motors
4GK60KA
|
Motor, gear head. Ratio 60:1, Size 4. PACKAGE OF 1.
|
New (un-used)
|
$95.00
|
|
|
|
Oriental Motors
41K25GN-AUL
|
Motor, induction. 100V 50Hz 0.55A 25W 1250r/min, or 100V 60Hz 0.51A 25W 1500r/min. 6uF Capacitor required, not included. Or 115VAC 60Hz 0.49A 25W 1500r/min. 4.5uF capacitor required, not included. Mount: Panel 3-1/8" square, 4 hole with 3-3/4" centers. Dimension: overall body 3" D x 3-1/3" high plus 1/4" D x 1/2" long shaft. Listed: UL/CSA.
|
New (un-used)
|
$65.00
|
|
|
|
JOHNSON
HC615LG
|
Motors, DC. Permanent magnet 18VDC, 100mA, 3500 RPM no load. Torque constant: 49.4 m/Nm/Amp. Dy. Res: 6.84 ohms. Motor Regulation: 28RPM/m-NmTorque: 126m-Nm 2.63Amp at stall. Maximum efficiency: 68%. Torque: 20m-Nm, speed: 2944RPM, current: 0.51Amp, output: 6.17 watts. Maximum power: Torque: 62m-Nm, speed: 1753RPM, current 1.37A. Output: 11.47 watt. Reversible ARM permanent magnet motor. Shaft Length: 11mm 0.435", shaft diameter: 3.1mm 0.125". Has an attached pulley: 10mm 0.39" inside diameter x 4.6mm 0.18" inside length. Motor: 38mm 1.495" D x 83mm 3.27" long overall. Rotation: clockwise when viewed from shaft output end with positive applied to positive. Weight: 8 oz.
|
Un-used but old
|
$5.00
|
|
|
|
Airpax
L82401-P2
|
Motor, stepper. 12VDC 52 ohm. 7.5 deg/step. 6 wires. Mounting: 1-3/8" hole spacing. Body: 42mm D. Shaft: 2.9mm D x 9.6mm L. Weight: 4.8 oz.
|
New (un-used)
|
$9.95
|
|
|
|
SANYO DENKI
P60B13200LCX2C
|
BL Super SERVO MOTOR 3.1KW 3,000-RPM 0.40" [10mm] dia mounting holes on 4.55" [115mm] centers. 135mm square face about 193mm long including 8.9mm dia shaft for encoder - Available With or WithOut encoder. 19.5mm dia knurled shaft 45mm long. Weighs 25-pounds without encoder or packaging.
|
Removed from equipment
|
$899.00
|
|
|
|
PORTESCAP
GC26M048A30V
|
Motor, stepper. Ratio: 10:1. 5V . 6 wires. Mounting: 1-3/16" hole spacing. Body: 1.1" x 1.43 x 1". Shaft: 3mm D knurled shaft 7.5mm L. DANAHER / PORTESCAP.
|
New (un-used)
|
$14.95
|
|
|
|
MERKLE-KORFF
EYQM-63264-15-2
|
Motor, PM. Ratings: 12VDC reversible, 8400RPM no load. Works on 2V and above 1.2"OD x 2.75" with magnetic tachometer 5500rpm under a light load. Tc: 1.6 oz-in. Ts: 7 oz-in. Kt:1.94 oz-in/A Po 7.7W Rt:4.65-OHM. No info on the tachometer. Motors are marked S0878B. Weight: 5 oz. Note: Some may have a 7.7mm brass gear with 8 teeth.
|
In Mfr Packaging
|
$9.99
|
|
|
|
ESCAP
23-D-21-213-B2X2
|
Motor, DC. Supply: 1-36VDC. Speed: 100 to 12000. Mech. Mtg: Two holes for the motor and six holes/pins for feedback information. Body Dimensions: 23mm D x 60mm, plus shaft - 3mm D x 20mm long. Note: Precision DC Motor & Tachometer. Specification sheet available.
|
New (un-used)
|
$24.95
|
|
|
|
DDC
2467A
|
Synchro shaft angle data converter 10-Bit out
Navy-MIL#2509543 21-Pin module with military spec's.
Data Device Corp. 5998-010291519
|
New (un-used)
|
$394.00
|
|
|
|
Emerson
MGE-316-CONS-0000
|
Motor, Servo. Supply: 240V 3-Phase Brushless. N/P Current: 4.0A. Speed: 4.000 RPM 0.75kW. 1.01 HP. Wire count: Two MS connectors. Body Dimensions: 3.3" square x 7.3"L plus shaft. 1"D attachment for optical demonstration. Note: 7 lbs. Looks new, was used for demonstration purposes only.
|
Used
|
$795.00
|
|
|
|
EDA
BLM6210-4
|
Motor, Servo. Supply: 460V. Speed: 3000RPM. Torque: Stall Cont: 13.6 Reg Amp 210-Lb-In. Stall Peak: 23 Reg Amp 390-Lb-In. K-B: 114V/KRPM.. Note: Brushless 150Hz. Class:55C Ser 96L624E-97 Large Black motor with Pulley - Excellent condition.
|
Used
|
$1,444.00
|
|
|
|
Von Weise Gear Co
VW10-30
|
Type RB Frame X48Y Motor ref# 48-52431-01 1/4HP 1725RPM 60Cy 230V 2.5A Continuous Duty - 40degC AA F17 Code:M SERV.F.1.35 APPROX 6" diameter x 12" long including 0.75" keyed shaft 1.5"Long - Has Nice mounting bracket 8.5" x 3.75" with Four mounting holes. Nice Motor.
|
Un-used but old
|
$147.88
|
|
|
|
Buehler
507104 series
|
Motor, DC. Supply: 6 - 24VDC 200-300mA. Torque: relatively high. Direction: Reversible by switching polarity. Wire count: Two 16" long wires with connector. Body Dimensions: 40mmD x 64mmL. Shaft Dimensions: 4mm shaft 19mm long and flattened shaft 20mm long. Weight: 9 oz.
|
New (un-used)
|
$14.95
|
|
|
|
REGAL
DE-25L-0001 KP63MT014
|
Motors, AC/DC. Universal 120V, high speed. Works at 12V+ approximately 150RPM, 12V 200mA AC with bridge rectifier or DC reversible.
|
New (un-used)
|
$4.95
|
|
|
|
Tridelta Industries Inc
705B0364 REV A.
|
SWITCHED RELUCTANCE motor DRIVER BOARD made by Tr-Delta, now a part of Honeywell. No Spex or paperwork available.
|
In Mfr Packaging
|
$39.95
|
|
|
|
Tridelta Industries Inc
M292-010A001-00B
|
Driver board for M132-013A001-16B SWITCHED RELUCTANCE motor - MOTORS SOLD OUT -- SMALLER VERSION AVAILABLE P/N 705B0364
|
In Mfr Packaging
|
$49.95
|
|
|
|
Gould Instruments
CL-212103
|
Hybrid MOSFET switching module for medium sized pulse-width modulated amplifiers. H-Bridge output stage- PWM and ENABLE inputs. Minimum load resistance: 10 ohms. Physically polarized 7-pin encapsulated package with integral heat sink. 1.4" by 2" by 0.5" with PCB-style mounting pins. Schematic of internals included. Power requirements: +/-15 VDC at 3 amperes.
- 2" x 1.4" x 0.4" above board - NEW W/ Spec Sheet...
|
New (un-used)
|
$3.48
|
|
|
|
SEIKO EPSON
EM462
|
Motor, stepper. 4 wires. Mounting: 1.96" hole spacing. Body: 1.65"D x 1"L. Shaft: 8mm D gear. Weight: 4.2 oz. 11" long ribbon cable.
|
In Mfr Packaging
|
$4.95
|
|
|
|
Cutler-Hammer
HMCP400W5W
|
3-POLE 400A MOTOR PROTECTOR 600VAC/250VDC
SERIES C, NEMA TYPE 3, 3 POLE MAG. TRIP RANGE=1250-2500A
NEW IN MANUFACTURER'S BOX WITH MANUAL/SPECS
|
Removed from equipment
|
$650.00
|
|
|
|
Oak-Grigsby Inc
94Q100-40-00
|
Encoder, rotary. Optical. 100PPR, 3,000RPM max. Two channel quadrature output. Style 2 Output: NC + A B. Mount: panel, 1/2" bushing and 1/4" SS shaft, ball bearing type, spins freely. Package: die cast housing, 1" square. Standard 4" 4-pin ribbon cable and connector. Note: Compact, robust, economical. 100 million+ operations.
|
In Mfr Packaging
|
$28.88
|
|
|
|
Airpax
A82454-M3
|
5V STEPPER 0-400RPM 0-320PPS 1.125 deg/step 3.5W Four 15-Ohm coils 6-leads Rotation Reversable 2.12" x 2.75" x 1.4" with gear attached to 1/8" shaft - 2 mounting holes 2.38"apart 7oz
|
Un-used but old
|
$6.95
|
|
|
|
OAK INDUSTRIES
LCE1N-2G09-363
|
Encoder, rotary. Manual 2 Bit, 9-cycle, 36-Position with detents. Gray code. Housing material: plastic, gray. Mount: panel, threaded-bushing. Dimensions: 0.877" (22.2mm) long x 0.826" (20.9mm) wide plus 3 PC leads x 0.336" (8.5mm) high. Bushing length: (3/3-32), 6.3mm long. Shaft: 0.250" (6.35mm) D x 0.500" (12.7mm) long. Note: Marked OAK 700. (0.830" x 0.343").
|
New (un-used)
|
$4.95
|
|
|
|
Haydon
E81302 / K81336-P4-S3
|
Motor, AC Timing. Supply: 115VAC 60Hz 1/5 watt. Speed: 6RPM. Frame Size: Pear shape . Mech. Mtg: 2-hole mount 1.9" spacing. Weight: 4.2 oz. Note: Reversible. Shaft: 1/8" D x 3/4" long (with 1/16" hole @ midpoint). Capacitor required and included 0.1uF. Hookup Instructions: 0.1uF 250V capacitor between Red & Green, tie two Whites - 120VAC on Red & White and watch it turn, slowly and reversible.
|
New (un-used)
|
$7.95
|
|
|
|
CLIFTON
26V-0 8CT4B CP/L761
|
Motor, special. Synchronous control transformer, 11.8V, 400Hz. Each with five (5) teflon wire leads. Body: 19mm D x 32.2 mm long plus threaded 3.1mm shaft 9.3mm long. Naval Ordnance P/N 10001-2064245 MK2 or MK8. NSN Mil-S-20708/79A MOD.
|
Un-used but old
|
$87.99
|
|
|
|
ESCAP
PL-11-219-119 Series28
|
Motor, DC. Supply: 3VDC 50mA. Body Dimensions: 28mm OD each motor. Assembly: 6 x 5 x 3". Note: Data cassette drive. Pair of precision motors. Series: 28. MFE 250BA 10-IPS 8000-BPS.
|
Removed from equipment
|
$19.00
|
|
|
|
Minimotor SA
8-334
|
Motors, DC. Precision cassette drive assembly. Used. Older with four Swiss & German made motors: German 330/5055-150 22mm OD x 46mm. 330/507-150 22mm OD x 46mm including 2mm D shaft. 330-509 22mm OD x 43mm. And a 16mm geared Swiss Model 050/0055-095-485.1 200cmp MiniMotor SA 42mm Long with the 2mm shaft. All permanent magnet and reversible. You dis-assemble.
|
Removed from equipment
|
$39.95
|
|
|
|
Superior Electric Co
MP70-9A-Z9-9Z-017
|
Motor, stepper. 5.2VDC 1.44Amp. 48 step/rev. Mounting: 2.28" hole spacing. Body: 2-3/4" D x 1.7" L. Shaft: 1/4" D x .6" L w/ flat. Shaft: 0.25" shaft w/flat 5/8" long, 2.75"square mounting plate with 4 holes with threaded inserts, about 2.28" apart. Weight: 1.5 lb (23 oz). High torque. Note: Slo-Syn. 8-wire 4-winding. Very High Torque.
|
New (un-used)
|
$7.50
|
|
|
|
Airpax
82227/B82359
|
Motors, stepper. Simple 2-phase, 12VDC 48 Step/Rev 7.5deg/step, 37 Ohm Bipolar windings. Dimensions: 35mm, 1.38" D. Attached: 4 wire, 16 inches long. Mounts 1.7" 42mm hole spacing, includes a 15-tooth 1/4" dia nylon gear. Running rate to 1800 step/sec. Weight: 2.6oz.
|
Un-used but old
|
$2.95
|
|
|
|
Superior Electric Co
MP70-1A-A4-9Z-025
|
Motor, stepper. 15V 4 phase 0.49Amp. 48 step/rev. 8 wires. Mounting: 2.2" hole spacing. Body: 2.75" square (70.5mm) x 1.75" high (46mm). Shaft: 1/4" D x 0.63" L. Weight: 1.3 lbs (22 oz). Note: Slo-Syn. Very compact for amount of torque. 8-wire = 4-phase = Unipolar.
|
New (un-used)
|
$12.95
|
|
|
|
Applied Motion Products Inc
4017-838
|
Motor, stepper. 12V 4 phase 0.16A . 3.6 deg/step. 5 wires. Mounting: 2.44" slot spacing. Body: 42mm sq x 33mm deep. Shaft: 3/16" D x .5" L. Weight: 9.7 oz. MPI spec #77619324.
|
New (un-used)
|
$8.99
|
|
|
|
Buehler
13.65.36
|
Motors, DC. High speed permanent magnet motors 6-24VDC, tach output. Disc drive replacement 10,000 RPM MAX. 2-IN-OZ. Dimensions: 1.38" D x 2.7" long, with pulley on shaft. Also useful as generator / wind speed indicator anemometer and science fair projects. Weight: approximately 8 oz.
|
New (un-used)
|
$17.97
|
|
|
|
Johnson
1342284
|
Motor, PM DC, 9-15V reversible. Draws about 100mA A 120VAC, no load. The EMI filter is completely insulated. Unloaded speed: 9VDC 750RPM - 12VDC 1250RPM - 15VDC 2000RPM. Dimensions: 18mm x 23.3mm x 51mmL (including shaft 7.5mm length / 1.9mm dia.) Weight: 9 oz.
|
New (un-used)
|
$3.75
|
|
|
|
Buehler
1.13.043.218-9 3140-0858
|
Motor, DC PM. Supply: 3-24VDC. Wire count: 23 inch twisted pair leads. Body Dimensions: 1.58"D x 4.16"Long overall. Shaft Dimensions: 3.9mm shaft and attached pulley 0.32"ID. Note: 19.1VDC Reversable High-efficiency Motor. 50-100mA. 1.13.043.218-9 3140-0858.
|
Un-used but old
|
$9.95
|
|
|
|
SYNCHRON
A12RC-6
|
Motor, AC. Synchronous 110V 60Hz 3 watt 300RPM. Dimensions: 2.330" long x 1.866" wide x 1.363" high. Shaft: 0.128" (3.2mm) D x 9.1mm long. Made in the USA.
|
Un-used but old
|
$7.95
|
|
|
|
Superior Electric Co
3180-EPI
|
Motor Drive, Slo-Syn Indexer. Bipolar, Speed Adjustable, Maximum running Speed of 10,000 Full Steps Per Second.
|
Used
|
$695.00
|
|
|
|
Superior Electric Co
KMT091F05E
|
Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversible. Wire count: Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Two-phase, single stack. Weight: 5 lbs. Warner Electric / Superior
|
New (un-used)
|
$250.00
|
|
|
|
Superior Electric Co
M093-FF-206
|
Motor, stepper. Synchronous, bipolar. Supply: 3.85V 4.0A. Steps: 200 steps per rev. Torque: 550 Oz-In Hold. Direction: Reversable. Wire count: 4-wire leads. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.38"D, 3.25"square x 5.2" plus 0.38" keyed shaft with flat. Note: 8 lbs. Used as demo, excellent condition.
|
Used
|
$289.88
|
|
|
|
Superior Electric Co
230-PTO
|
Oscillator Motor Drive. DB25S I/O port. S1:6-pin DIP switch. Trimpot adjustment for Base, High, DCC and ACC. 8-pin F receptacle for motor. 115V 1A. 50/60Hz. 9 lbs.
|
Used
|
$285.88
|
|