|
|
DDC
2467A
|
Synchro shaft angle data converter 10-Bit out
Navy-MIL#2509543 21-Pin module with military spec's.
Data Device Corp. 5998-010291519
|
New (un-used)
|
$394.00
|
|
|
|
Oak-Grigsby Inc
94Q100-40-00
|
Encoder, rotary. Optical. 100PPR, 3,000RPM max. Two channel quadrature output. Style 2 Output: NC + A B. Mount: panel, 1/2" bushing and 1/4" SS shaft, ball bearing type, spins freely. Package: die cast housing, 1" square. Standard 4" 4-pin ribbon cable and connector. Note: Compact, robust, economical. 100 million+ operations.
|
In Mfr Packaging
|
$28.88
|
|
|
|
OAK INDUSTRIES
LCE1N-2G09-363
|
Encoder, rotary. Manual 2 Bit, 9-cycle, 36-Position with detents. Gray code. Housing material: plastic, gray. Mount: panel, threaded-bushing. Dimensions: 0.877" (22.2mm) long x 0.826" (20.9mm) wide plus 3 PC leads x 0.336" (8.5mm) high. Bushing length: (3/3-32), 6.3mm long. Shaft: 0.250" (6.35mm) D x 0.500" (12.7mm) long. Note: Marked OAK 700. (0.830" x 0.343").
|
New (un-used)
|
$4.95
|
|
|
|
GEMCO
1986-1877
|
RESOLVER IN HEAVY DUTY MOUNT RATIO 6/1 SHAFT: 3/4" KEYED
|
New (un-used)
|
$87.50
|
|
|
|
Dynapar/Danaher
3201001230
|
Encoder, rotary. Incremental 100-PPR. Bidirectional. Power requirements: current sink, TTL, TTL liner driver: 5 - 26VDC at 80mA max. plus load: CMOS line driver: 5 to 15VDC at 80mA max plus load. Output current: open collector: 40mA sink at 0.5V; line driver: 40mA source/sink. Environmentally sealed enclosure. Shaft: 3/8" single ended. 8830 TTL line driver. MS3102E-16S-1P, 7 pin male connector. Note: Qube. Complete with manufactures wiring instructions and guidelines.
|
In Mfr Packaging
|
$200.00
|
|
|
|
BEI
MX21-591-1
|
Rotary Optical Encoder. Incremental. Insta-Mount.
|
New (un-used)
|
$64.50
|
|
|
|
Max Stegmann GmbH
AG661-466102000000
|
Absolute serial encoder, multiturn. 4096 x 4096. With black adapters for use with 1/4" shaft. With yellow cable and 15-pin connector and switch.Box states:Serial rotary encoder for use with KM6ZZ-1032 motor.
|
Used
|
$175.00
|
|
|
|
BEI
2XHS35F-62-R1-SS-1000-ABZC-7272-SM18
|
Express Incremental Rotary encoder. S35F-62-R1-SS-1000-ABZC-7272-SM18 0.625" hollow shaft 1000Cycles/Rev. Electrical: Output: Two chnnels in quadrature. 1,000 cycles/turn. Supply: 5-28VDC 100mA. Complementary outputs. Reverse, overvoltage and short circuit protection. MS-connector. Mech: Shaft Bore: 0.625", with insulating sleeves. Tether Block and pin. Bore Runout: 0.001" T.I.R maximum. Bearings: 52100 SAE High carbon steel. Bearing Housing: Die cast aluminum with protective finish. Cover: Die cast aluminum with protective finish. Bearing Life: 7.5 X 109 revs (50,000 hrs at 2500 RPM) Maximum RPM: 6,000 RPM. Moment of Inertia: 0.019 oz-in-sec2. NEMA 4 & 13 IP65. Weight: 18 oz.
|
New (un-used)
|
$395.00
|
|
|
|
BEI
XH25D-SS-300-ABZC-4469-LED-EM18
|
Absolute Incremental Encoder. Line driver, 100mA source/sink. 5-15VDC 90mA-Input. Heavy duty, square flange encoder, 2.5"D with 3/8"sealed SS shaft with flat. 10-pin MS connector in rear. BEI SENSORS & SYSTEMS Co. 1 lb.
|
New (un-used)
|
$289.95
|
|
|
|
BEI
XH25D-SS-300-ABZC-8830-LED-SM18
|
Express Rotary Encoder, Absolute. 5VDC 120mA-Input. TTL line driver, 40mA source/sink. Heavy duty, square flange encoder, 2.5"D with 3/8"sealed SS shaft. 10-pin MS connector on side. BEI SENSORS & SYSTEMS Co. 1 lb.
|
New (un-used)
|
$298.55
|
|
|
|
924-01036-342
|
Optical Encoder. Double-flatted 0.38" Shaft. Listed UL CUS 56G5 for HAZARDOUS LOCATIONS Telemetering Equipment. NEMA 4X and 6. 0-70C Input:5-28VDC 4VA. Mech: 72mm dia 95mm-flange.BEI INDUSTRIAL ENCODER DIVISION
|
Un-used but old
|
$495.00
|
|
|
|
RSF Elektronik
DG118R1 Code 990002011664L05
|
Encoder Servo mount. 5,000 lines/rev. +5V operation. 6mmD solid shaft 10mmL. 58mmD with long cable and 12-pin Male connector. Up to 90.000 counts per rev. Sinusoidal micro-current signals or square wave signals via Line Driver (RS 422 Standard.) Marked:Repaired by American Pfauter. Guaranteed functional. Code: 990002011664L05. 310591R. RSF Elektronik 004 072425 01 001.
|
Good
|
$289.95
|
|
|
|
BEI
924-01036-592
|
Optical Encoder for hazardous locations 72mmD. 95mm flange-mount. Double-flatted 0.38" Shaft. Listed UL CUS 56G5. Telemetering Equipment. NEMA 4X and 6. 0-70C Input:5-28VDC 4VA. BEI INDUSTRIAL ENCODER DIVISION H38D-400-AB-7273-SC-UL
|
Un-used but old
|
$449.00
|
|
|
|
Allen Bradley - AB
854N-SJHN4-CMY2
|
9.5mm shaft 64mm diameter 10-pin MS3102E18-1P Male Connector. 3-hole mounting 42mm apart. 91mm tall including shaft. Used / Sold as is.
|
Used
|
$200.00
|
|
|
|
HOHNER CORP
IN96-AE2S-A1A0-1000
|
Encoders, rotary. C/N 28907, class 2, 380mA max. Shaft: 5/8". Pin# 1=GND, 2=5...24V, 3=Output A, E=N/C. Dimensions: 0.62"/15.8mm ID x 1.9"thick including metal bearing x 3.4"dia x 5.25"long. S/N03230514. More info: http://www.encoderonline.com/Data-Sheets/Incremental/Data-896.htm
|
In Mfr Packaging
|
$348.88
|
|
|
|
Allen Bradley
845T-DZ53EFW-C
|
Encoder, optical incremental. 1024 Resolution. 24VDC in, 5VDC DLD out. Channel A, B and Z. Series A. Mount: square flange. Shaft: 3/8" D. With a CA3102R18-1P 10 Pin flange male connector and mate CA06R18-1S 10 Pos female cable mount. Note: ALT P/N 98301075. Complete with manufactures installation instructions. Made in the USA.
|
In Mfr Packaging
|
$250.00
|
|
|
|
Dynapar/Danaher
62CAEF-1200-A0
|
Factory new Rotart Shaft Encoder - Dual 1/2" flattened shaft, 1200-PPRevolution 3.5"OD about 4.5" long shaft(all the way thru!) 6-pin Male MS3102E14S6P connector (no mate) NEW-IN BOX
|
In Mfr Packaging
|
$243.00
|
|
|
|
Allen Bradley
845H-SJHZ14CMY2 SER.A
|
OPTICAL INCREMENTAL ENCODER SERIES A 5VDC 500 CPT. DATA RPM=25200 INDEX RPM=15000 QUADRATURE: 90 DEG. +/- 22 DEG. DUTY CYC: 50% +/- 10% W/ LINE DRIVER CONNECTOR SERVO MOUNT W/ FLEXIBLE SHAFT COUPLER
|
Used
|
$200.00
|
|
|
|
DISC INSTRUMENTS
PC62D-40-5
|
USED OPTICAL ENCODER
|
Removed from equipment
|
$22.50
|
|
|
|
WARNER & SWASEY
5309-1011 Type 2CW
|
Optical Encoder Input-2000PPR Range:400,000
6-1/8 " high x 5-1/4" dia. With one 32-Pin (M) panel mt military circular connector 3/8" dia shaft 1-1/8" long (Keyed) RFE-USED Make Us An Offer!!!!
|
Removed from equipment
|
$97.50
|
|
|
|
Danaher Controls
HA62509000101
|
ROTARY ENCODER 3/8 SHT FLG MT 5-26VDC SD MT
|
New (un-used)
|
$188.50
|
|
|
|
Reliance Electric
BDC-12HS
|
BRUSHLESS AMPLIFIER by ELECTRO-CRAFT 5'x3"X2.3"
ADJUSTABLE LOOP GAIN, CURRENT LIMIT VCS GAIN AND TEST/OFFSET.
+/- 10V 5mA OUTPUT +5V@30mA OUTPUT
|
New (un-used)
|
$87.50
|
|
|
|
US DIGITAL
SP16NT
|
Rotary optical shaft encoder. Digital Pot. 16CPR 4 pin connection provides for +5VDC. Ground and A and B encoded signals. ( .3 in. oz max) NO Torque. Used/Removed from equipment.
|
Used
|
$35.00
|
|
|
|
VS Sensorik
KWG2D4-15K
|
Encoder, rotary. Magnetic. New. More info: http://www.vs-sensorik.com/Datenblaetter/Drehgeber/VS-Sensorik_KWG2D.pdf
|
New (un-used)
|
$150.00
|
|
|
|
ONO SOKKI
RP-132D0-T1
|
Encoder, Rotary. 3600-Pulse/Rev 12VDC. 122mmD x 140mmL with 0.6"[15mm] flatted shaft 1''Long. 5-Inch [127mm] Flange mount.
|
Un-used but old
|
$374.95
|
|
|
|
Dynapar/Danaher
108594-0015
|
Cable assembly for rotary encoders. Military connector MS3106A14S-6S female to DB9 male shielded. Cable length: 15 foot.
|
New (un-used)
|
$79.00
|
|
|
|
Autotech Controls
F2N-01024-5TBFE
|
ENCODER
|
Used
|
$0.00
|
|
|
|
Oak-Grigsby Inc
800C032-000-0-0
|
Rotary shaft encoder.
|
New (un-used)
|
$22.50
|
|
|
|
Anilam Electronics
L25G-1270-AB-7406R-SPT02-S
|
Encoder, rotary. Shaft angle encoder. Enclosed. Dimensions: 2.626" D (for 2.75" hole) x 2.488" high plus shaft. Shaft: 1/4" D x 1" long. Mounts on 2" centers. Note: Alt P/N: 01008-029. Has a Bendix 6 position female connector. Used/Removed from equipment.
|
Removed from equipment
|
$224.99
|
|
|
|
ESCAP
P250 254 0.7
|
Sensor, rotary encoder. Harmonic Drive AG. Type: HDPH-5-8000-2-SP, with Encoder P/N: E9-0100-3.0-1 and attached 2" 10 Conductor flat ribbon cable.
|
Used
|
$250.00
|
|
|
|
VS Sensorik
KWG2D4-15K
|
Encoder, rotary. Magnetic. Used/Removed from equipment. More info: http://www.vs-sensorik.com/Datenblaetter/Drehgeber/VS-Sensorik_KWG2D.pdf
|
Removed from equipment
|
$100.00
|
|
|
|
DataTech
RS23-500-40/5
|
Encoder, rotary. Used. Dimensions: 2.25" round.
|
Removed from equipment
|
$100.00
|
|
|
|
Dynamics Research Corp
77-31-B03-500
|
Encoder, rotary.
|
Removed from equipment
|
$0.00
|
|
|
|
ONO SOKKI
132D-T1
|
Encoders, rotary. Supply: 12VDC 150mA. Tolerance: 5%. 3600P/R 2 phase square wave + zero mark. Totem pole output, load resistance 470 Ohm min. Open collector output 40 VDC, 50mA or less. Timing can be selectable. More info: PG8 http://www.onosokki.co.jp/English/hp_e/whats_new/Catalog/PDF/RPseriesE.pdf
|
Used
|
$259.00
|
|
|
|
HEIDENHAIN
LS106
|
Encoder, linear. Range: 380mm. Platform: 90 x 35mm. Overall Length: 570mm. 326.797.01 C11.
|
New (un-used)
|
$0.00
|
|
|
|
Baumer Electric
BDK16.05A360-5-5
|
Encoder, rotary. Incremental. Body diameter: 30mm. IP rating housing: IP65. Maximum revolutions: 12000rpm. Output signal: TTL. Pulse per revolution: 360. Shaft type: Incremental; Miniature. Supply voltage: 5VDC. Switching frequency: 50kHz.
|
New (un-used)
|
$249.00
|
|
|
|
SEQUENTIAL INFORMATION SYSTEMS
11A736IZ-15V-H1F1D1B1T
|
Shaft Angle Encoder 4.7mm round shaft ~ 27mm diameter, has long cable with MS connector.
|
New (un-used)
|
$195.00
|
|
|
|
GEFRAN
EG03-1-R
|
240 PPR - Unidirectional with analogue output linear proportional to speed of rotation. 1V / 100 laps - 1V / 1000-RPM - New mating Connector included - 11-25V 30mA 5,000-RPMmax Fmax=50kHz, for output with hysteresis, X4 signal is a sequence of rectangular pulses. Open Collector Output. Custody: Anodized aluminum face plate, plastic housing. Moment of inertia: 50gr cm - Angular accelerattion: 2000 rad/sec2.
|
Un-used but old
|
$175.89
|
|
|
|
BEI
MX21-581
|
Rotary Optical Encoder. Incremental. Insta-Mount.
|
Un-used but old
|
$129.00
|
|
|
|
Dynapar/Danaher
3200100000
|
3/8 sht double end 7406 oc Pretty 2.25" blue cube, 3/8" shaft each end. 6-pin Male MS connector.
|
New (un-used)
|
$148.79
|
|
|
|
ENCODER PRODUCTS CO.
755A-02-S-0060-R-OC-1-S-S-N
|
Input: 5/28VDC Has brass coupler with 0.367" ID, short cable w/ 4-pin Male 14S Amphenol panel mount connector. 1.5"OD X 1.4" with coupler and mount.
|
New (un-used)
|
$79.88
|
|
|
|
LITTON
MD20-10X2/3820
|
14.4 Degree Rotation ClockWise 00.569%V (green)CUP-A Six (6) long teflon wires. Almost 9 Turns. 1.822" / 46mm OD x 52mm Long - 0.13" / 3.3mm dia shaft 0.4" long.
|
Un-used but old
|
$34.97
|
|
|
|
Baldwin
5V83A
|
1/4" Shaft 21mm long DB-25P connector in rear - 66mm diameter x 78mm tall
|
Un-used but old
|
$48.88
|
|
|
|
ENCODER PRODUCTS CO.
220C-12-390-OC-.750L
|
OPTICAL ENCODER 390-Pulses per Revolution 12VDC 3/4"Hollow for 4K RPM Shaft 0-6000Hz 10-oz running torque 2.25"dia x 1.735" thick - NEW
sealed ball bearings - 12V@25ma DC - Square wave out Sinks 20 mA - 1uSec rise time Aluminum with black anodized finish, 3-conductor cord 6' long wt:8oz
Designed to mount directly on a motor shaft. As the shaft rotates a square wave output pulse is generated that varies at a rate proportional to shaft speed. Ideal for motor speed control or tachometer feedback applications. Just ideal!
|
Un-used but old
|
$129.88
|
|
|
|
LITTON
VNB11-17P4
|
Rotary shaft encoder. Includes report of acceptance tests, S/N 74586. Dimensions: 27mm D x 67mm plus 8.8mm long 3.3mm shaft with 34 teflon leads 37" long. No other data available.
|
Un-used but old
|
$188.89
|
|
|
|
DATA TECHNOLOGY INC
SM23-500-40/5-03
|
Encoders, rotary. Optical. Used/RFE/Removed from equipment.
|
Removed from equipment
|
$29.95
|
|
|
|
DATA TECHNOLOGY INC
SM23-120-22/12
|
Encoders, rotary. Optical. Dimensions: 2-5/16" dia x 1-1/3" high with a 1/4" shaft 9/16" long. Used/RFE/Removed from equipment.
|
Removed from equipment
|
$29.95
|
|
|
|
ENCODER PRODUCTS CO.
721
|
ACCU-CODER INCREMENTAL SHAFT ENCODER
60 PULSES PER REVOLUTIONModel 721 - AC Powered Unidirectional Encoder
Designed for use where DC power is unavailable. It is essentially a 711 with a built-in 120 VAC power supply. MATING CONNECTOR INCLUDED
|
Good
|
$62.50
|
|
|
|
Danaher Controls
320010100
|
Encoder, rotary. Bidirectional. 10 Pulse/Rev, 5-26V. Mount: 4 holes = 6/32 UNC-2B threads x 0.187 deep, with 50mm centers. Dimensions: approximately 57mm square x 57mm high. Shaft: 3/8" single ended. 5 Pin male MS connector. Complete with manufactures wiring instructions and guidelines. Qube.
|
New (un-used)
|
$200.00
|
|
|
|
Dynapar/Danaher
E1103601200
|
Encoder, rotary. Incremental 360-PPR. Input: TTL (+5VDC): 135mA max. CMOS (+12 or +15VDC): 100mA max. Rugged all metal housing. Mount: Servo face, 1/8" stainless steel shaft. 5V STD. Dimensions: 1.1" OD x 1.2" high. 4 Wire plus braid shield. Miniature. Complete with manufactures wiring instructions and guidelines.
|
In Mfr Packaging
|
$200.00
|
|