Search Filters

 

 

22 Results  1  
  Mfg. Part # Description Condition Price Buy
KEYENCE
FU-83A
FIBEROPTIC SENSOR CABLE - METAL JACKETED with hardware - heat resistant New (un-used) $37.50
KEYENCE
PG-610
OPTICAL PASSAGE CONFIRMATION SENSOR AMPLIFIER INPUT: 12-24VDC @40mA In Mfr Packaging $64.50
KEYENCE
FU-7F
10-foot long TWO FIBER OPTIC CABLES WITH CONNECTING H/W New (un-used) $24.00
KEYENCE
AT-210
Sensor control module, amplifier unit. Output voltage: -0.5 ~ +0.5 V. Output impedance: 300 Ohm. Supply voltage: DC12-24V, ± 10% ripple (PP) 10%. Complete with a 4 conductor cable 9 foot, and attached 4 pin male micro connector. New (un-used) $290.89
KEYENCE
BL-U1
Power supply unit, for bar code readers, 100-240VAC. With set-up software. In Mfr Packaging $99.00
KEYENCE
F-1 X1
ATTACHMENT In Mfr Packaging $15.00
KEYENCE
FU-35
FIBER OPTIC (&SENSOR) LEADS WITH H/W In Mfr Packaging $14.50
KEYENCE
FS-17
12-24V SENSOR EACH PC IS MISSING MOUNTING BRACKET MANUF BX'S. MANUF IN Japan In Mfr Packaging $62.50
KEYENCE
FU-6F
Fiber Optic Cable - 2 dual terminated - new 6 FOOT MAX. New (un-used) $39.00
KEYENCE
PS-49
LONG RANGE PHOTOELECTRIC SENSOR 32-53mm Definite-Reflective 1.5mm Red beam spot simplifies positioning the sensor. Targets 0.1mm in diameter can be detected from 50mm - NEW TWO LENS SENSORS WITH 10FT CORD New (un-used) $55.00
KEYENCE
ES-32DC
AMPLIFIER for Long Distance Proximity sensors - 10-28VDC supply - Output: NPN O.C. 200mA (40V max) NO / NC selectable In Mfr Packaging $129.00
KEYENCE
FU-35FA
Fiber optic sensor with cable. New (un-used) $44.99
KEYENCE
FU-7F
Fiber optic sensor with 2 meter cable. No accessories. In Mfr Packaging $49.00
KEYENCE
FU-43
Fiber optic cable. New (un-used) $100.00
KEYENCE
FS2-60
Fiber photoelectric amplifier/sensor, NPN, 12-24VDC. Double marked 016831. Complete with manufactures instruction manual. In Mfr Packaging $100.00
KEYENCE
N-48
Power supply unit for barcode readers. More info: http://www.keyence.com/dwn/bl_general_ka.pdf New (un-used) $0.00
KEYENCE
N-400
Multi-drop controller. Allows one host computer control up to 31 bar code readers. New (un-used) $0.00
KEYENCE
BL-781
Laser bar code reader. Raster. Visible red semiconductor laser. Class II. Wavelength: 650nm. Output form: NPN. Supply voltage: 5V. Maximum output: 2 watt. Reading distance: 200 to 1200 mm (7.87" to 47.24"). In Mfr Packaging $175.00
KEYENCE
PS-25
Amplifier Serarate type 12-24VDC 45mA Output:NPN-OC 200mA 40V max New (un-used) $125.00
KEYENCE
KV-U3
24VDC +/-10% 1.4A Switching P/S for PLCs - Ripple:240mV p-p max - Input: 100~240V 50/60Hz - KV10~KV80 PLCs can be mounted on top of the KV-U3, saving installation space. with instructions New (un-used) $0.00
KEYENCE
PZ-V71P
Auto Calibration Infrared LED Photoelectric Sensor - 1mSec Response time - 12~24V self contained - Sensing Distance: 20~900mm [0.8~35"] 30x30cm [11.81"] SET Distance: 150~900mm 10x10cm White mat paper - Switch-selectable: LIGHT ON / DARK ON - 3-wire leads Un-used but old $95.88
KEYENCE
KV-8ER
PLC Relay Expansion Module Good $59.89
22 Results  1