BELDEN WIRE - YP3236 - 9V28040 - Style 2693 - Cable, Ribbon, Vari-Twisted, Flat Cable, 300V. 28-40C 28AWG 40 Conductor 105C.
- Buy 10 for $1.98 each and save 31%
- Buy 50 for $1.69 each and save 42%
- Buy 100 for $1.29 each and save 55%
BELDEN WIRE - YP3236 - 9V28040 - Cable, Ribbon, Twisted, Flat, 300V.
Belden’s PVC Vari-Twist 9V280XX series was designed to reduce crosstalk in the balanced mode by twisting the pairs, but can be mass-terminated in the programmed flat sections with any standard IDC connector. To further reduce crosstalk, each adjacent pair is twisted in the opposite direction. The standard twist length is 18 inches followed by a 2 inch flat section of .050″ spaced conductors. The cable consists of stranded 28 AWG (7x36) tinned copper, color-coded PVC pre-insulated singles — laminated to a single clear PVC substrate. Eleven various conductor/pair counts are standard; other sizes are available upon request. The cable is UL approved (CSA available upon request) and passes the VW-1 Vertical Wire Flame Test.
Status: Discontinued
Note: "Twist-n-Flat". AWM Style 2693
28-40C. (28 AWG 40 Conductor).
Current Rating: 1 Amp
20 Pair Twist-N-Flat
Conductor Material: Tinned Copper
Stranding: 7 X 36
Pitch: 0.050"
Unshielded
Operating Temperature; -20C to 105 Deg C.
Flamability Rating: UL VW-1
Insulation Material: PVC - Polyvinyl Chloride
PVC Insulation Thickness: 0.010"
Dielectric Withstand Voltage: 2000 V
Color: Multicolor Rainbow - Each pair consists of a Tan conductor paired with a color-coded conductor.
Color Sequence: Each Terminating Section: Brown/Tan, Red/Tan, Orange/Tan, Yellow/Tan, Green/Tan, Blue/Tan,
Purple/Tan, Gray/Tan, White/Tan, Black/Tan. Sequence is repeated as necessary.
Applications: Internal Wiring of Electronic Equipment
Approvals: UL, CSA, AWM Style 2693
New Old Stock
Alternates: 3M 1700/40, Mouser 517-1700/40, Amphenol Sprecta-Strip 132-2801-040, Belden 3586/4MC005, 9H28040, 9V28040
Priced by the Foot, Minimum Order Length: 10'.
| SKU | 133311 |
|---|---|
| Condition | NS - NEW SURPLUS |
| Part Number | YP3236, 9V28040 |
| Alternative Part Number | 3M 1700/40, Mouser 517-1700/40, Amphenol Sprecta-Strip 132-2801-040, Belden 3586/4MC005, 9H28040, 9V28040 |
BELDEN WIRE - YP3236 - 9V28040 - Cable, Ribbon, Twisted, Flat, 300V.
Belden’s PVC Vari-Twist 9V280XX series was designed to reduce crosstalk in the balanced mode by twisting the pairs, but can be mass-terminated in the programmed flat sections with any standard IDC connector. To further reduce crosstalk, each adjacent pair is twisted in the opposite direction. The standard twist length is 18 inches followed by a 2 inch flat section of .050″ spaced conductors. The cable consists of stranded 28 AWG (7x36) tinned copper, color-coded PVC pre-insulated singles — laminated to a single clear PVC substrate. Eleven various conductor/pair counts are standard; other sizes are available upon request. The cable is UL approved (CSA available upon request) and passes the VW-1 Vertical Wire Flame Test.
Status: Discontinued
Note: "Twist-n-Flat". AWM Style 2693
28-40C. (28 AWG 40 Conductor).
Current Rating: 1 Amp
20 Pair Twist-N-Flat
Conductor Material: Tinned Copper
Stranding: 7 X 36
Pitch: 0.050"
Unshielded
Operating Temperature; -20C to 105 Deg C.
Flamability Rating: UL VW-1
Insulation Material: PVC - Polyvinyl Chloride
PVC Insulation Thickness: 0.010"
Dielectric Withstand Voltage: 2000 V
Color: Multicolor Rainbow - Each pair consists of a Tan conductor paired with a color-coded conductor.
Color Sequence: Each Terminating Section: Brown/Tan, Red/Tan, Orange/Tan, Yellow/Tan, Green/Tan, Blue/Tan,
Purple/Tan, Gray/Tan, White/Tan, Black/Tan. Sequence is repeated as necessary.
Applications: Internal Wiring of Electronic Equipment
Approvals: UL, CSA, AWM Style 2693
New Old Stock
Alternates: 3M 1700/40, Mouser 517-1700/40, Amphenol Sprecta-Strip 132-2801-040, Belden 3586/4MC005, 9H28040, 9V28040
Priced by the Foot, Minimum Order Length: 10'.
