Circuit Breaker

3VF & Meter #3VF4231-1DF41-7KA0 50/60Hz 415V/40/40kA 690V 14/7 Excellent Condition - UL-E167267 CSA-LR44511 VDE-0660 IEC-947-2 Trip Thermal Magnetic Circuit Breaker Learn More

TE Connectivity / Potter & Brumfield - W23-X1A1G-40 Circuit Breaker.

W23 Series - Single Pole

Thermal Push/Pull 40 Amp 250VAC

Voltage: 50VDC Max.

Mount: Panel Mount

UL, CSA Approved

Dimensions: See Attached Diagram

New Old Stock

Proudly Made in USA

Learn More

Circuit breaker. 1.5Amp 250VAC / 50VDC with recessed button that can not be pulled out to disconnect circuit - 10-45 second trip time - Carries 100% of rated current, 1/4" QC Terminals.

Learn More

SIEMENS P&B - W58XA4A12B-20 Circuit breaker.

SP 20Amp 250VAC/50VDC.

Thermal-type.

Single hole mount.

Recessed button can not be pulled out to disconnect circuit.

Continuously carries 100% of rated load.

Dimensions: 1.394" wide x 0.660" deep x 1.381" high, plus threaded bushing 0.292" long.

Contacts: 1/4" quick connect terminals.

Learn More

Circuit breaker. SP 5.5Amp 65VDC. Trip amp: 6.87Amp. Auxiliary switch: 5Amp 250VAC. Note: Double marked: AM1-B1-A. Learn More

Circuit breaker. 2P 15Amp 250VAC. Delay: 2. Mount: panel.

Learn More

Heinemann / Eaton - JB1-A3-A - Circuit Breaker. SP 0.5Amp 250VAC. JB Snap-In Mount Series, Toggle. Trip amp: 0.625Amp. Delay: 3. Mount: panel, snap-in. Dimensions: 0.761" wide x 2.65" (actual 2.012") high, behind panel. Listed: UL/CSA. J Series can be used in a wide variety of applications including telecom, rail, marine and mobile equipment. These breakers are small and lightweight, saving valuable space in crowded control panels or weight in portable equipment. Status: Discontinued, New Old Stock. Learn More

Circuit breaker. 3P 250VAC/65VDC. Trip amp: 20.3Amp. Delay: 3. Learn More

E-T-A - ETA - 41-04-PR-6.0A - Thermal Overcurrent Circuit Breakers. 250VAC / 48 VDC 6Amp.

Circuit Breakers Miniaturised single pole thermal circuit breaker with push-to-reset tease free, trip-free, snap action mechanism (R-type TO CBE to EN 60934) for PCB mounting. Approved to CBE standard EN 60934 (IEC 60934).

Status: Discontinued

Thermal Overcurrent Circuit Breakers, 1 Pole.

Solder Terminal Pins for PCB Mount

Max. Voltage: 250VAC / 48VDC

Current Rating: 6Amp.

Internal Resistance: =/< 0.05 ohm

Insulation Resistance: > 100 MΩ (DC 500 V)

Actuator Type: Button

Mount: PCB.

Dimensions: 0.75" Wide x 0.44" High x 1.6" Deep Overall. (27.6mm X 11mm X 19.2mm)

Applications: Motors, transformers, solenoids, printed circuit boards, hand-held machines and appliances, marine applications, caravans.

Approvals: UL CSA

New Old Stock

 

Learn More

E-T-A (ETA) - 45-000-P-H - 2.5 Amp Circuit Breaker. SP 2.5Amp 250VAC

SP 2.5Amp 250VAC.

With reset button.

Mount: 2 hole panel, front flange 49.9mm long x 17.9mm wide and 40.0mm centers.

Dimensions: 31.2mm wide x 14.0mm x 49.5mm behind panel.

Contacts: (2) 1/4" male quick connect terminals.

Listed: UL/CSA.

Made in Germany

Learn More

AIRPAX - UPL211-1REC2-8966-1 Circuit breakers.

3 Pole 400Hz 8 Amp F.L., T.A.12

250VAC 400 cycle, delay 41,

AUX switch 10A-250VAC,

AUX coil 12VDC.

Additional Data: https://www.sensata.com/sites/default/files/media/documents/2018-04-26/ourproducts_apl_upl_series_datasheet.pdf

Learn More

Sensata Airpax - PP11-62F-2.00A-24458-2-V

Hydraulic Magnetic Circuit Protectors (SNAPAK®)

2Amp Push - Pull Circuit Breakers

Single Pole

Switch Trip/Amp 2.00 Ampere

250VAC 50/60Hz

Frequency & Delay: Slow 50/60 Hz

(2) 1/4" male QC mounting and dress nut included

 0.680" x 1.375" x 1.960" behind panel

Weight 1.0 oz 

Highly Discounbted - New Old Stock

Additional Information: https://datasheet.octopart.com/PP11-62F-2.00A-24458-2-V-Sensata---Airpax-datasheet-68313446.pdf

Alternate: TE Connectivity W23-X1A1G-2

Proudly Made in USA

Learn More

E-T-A - ETA - 1658-A00-00-P10-20A - Circuit Breaker. Type 1658, 20Amp 120/125VAC, 28VDC, Self Resetting.

Series: 1658       

Type: Thermal Overcurrent        

Current Rating: 20 A      

Voltage Rating AC: 120/125 VAC        

Voltage Rating DC: 28 VDC          

Number of Poles: 1 Pole

Actuator Type: Self-Reset            

Operating Temperature: - 20 C to + 60 C

Dimensions: Height: 14 mm, Length: 27 mm, Width: 32 mm        

Mounting Style: Panel Mount    

Termination Style: Blade     

Unit Weight: 1.304431 oz

Approvals: CSA C22.2 No 235, IEC 60934, UL1077, UL1500

 

Learn More

ROWAN Controller Inc. - 2101-CPAOPAR Circuit Breaker, Pushbutton.

Contact Ratings: 1.5 Amp.

Actuator: Illuminated 120V lamp.

Connection: Solder.

Mech: Panel, Bushing Mount 0.75" D.

Body: 1.1234" wide x 1.018" long x 2.207" deep plus contacts.

Threaded bushing: 0.817" long (seated).

Lamp: GEB2A Bayonet Neon.

Push on/Push off.

Note, the closed contacts have a resistance of 1.8 ohms and 3.6 amps DC through this path will trip the contact mechanism immediately. Lower currents, in excess of 1.5 amp will trip more slowly. These electrical facts shall not be used to define any actual specifications on this device as a circuit breaker.

New Old Stock

Proudly Made in the USA. 

Learn More

POLYSWITCH PTC RESETTABLE FUSE 130V Learn More

LITTELFUSE - 814020 Circuit Breakers.

A circuit breaker is an automatically operated electrical device designed to protect an electrical circuit from damage caused by overload or short circuit. Unlike a fuse, a circuit breaker can be reset (either manually or automatically) to resume normal operation. Automatic units are cycling and continuously self resetting, while the manual units are used where investigation of the fault is required prior to the circuit being reset.

Push Button Manual Reset (type III) with 90° bracket

24V 20 Amp.

Operating temperature: -23°C to 65°C.

Case: metal housing/shielding small 2-screw terminals.

Dimensions: 1-1/4" long x 3/4" wide x 5/8" tall.

New Old Stock

Applications: Automotive, Commercial, Industrial, Trailor Lighting 

Learn More

CIRCUIT BREAKER 16AMP DIN MOUNTABLE CE-approved 1-polig Learn More

Circuit Breaker. 2P 15Amp 125VDC. TD: 2. Curve 2. Dimensions: 2" wide x 3.6" deep x 3.75" high. Mounts on 2.75" centers. Learn More

Circuit breaker. SP 65VDC 5.5 Amp. Trip 6.9 Amp. With auxiliary switch 5 Amp 250VAC. Double marked AM1-B1-A. Learn More

GENERAL ELECTRIC - TED134020 Circuit Breaker.

General Electric, E150 Line, type TED, 3P, 3PH, 20A, 480V, 18kA@480V, complete with load side lug terminals, standard interrupting capacity, 40°C, bolt-on, thermal magnetic, molded case circuit breakers.

Sub-Category    Molded Case

Family: E150 Line

Type: TED

Phase: 3

Poles: 3

Voltage: 480 VAC

Amperage: 20

Frame Type: E150, Type TED

Functions: LI - Long-Time and Instantaneous

Connection: Bolt-On, Panel Mount

Protection: Thermal Magnetic

Functions: LI - Long-Time and Instantaneous

Current Interrupting Ratings: 18,000 Amp @ 240VAC or 14,000 Amp @ 480VAC Max RMS SYM

AIC Rating: 18kA@480V

Dimensions: 6.3" x 4.13" x 3.38".

UPC 0783116408242

Weight: Approximately 4 lbs 

Note: Used - Removed from Equipment

The item may have some signs of cosmetic wear, but is fully operational and functions as intended.

Made in USA

 

Learn More

ETA - E-T-A - 1658-G21-00-P13 - 1658-G21-00-P13-12A - Thermal Overcurrent Circuit Breaker.

Very cost effective design to meet international requirements. No exposed metal parts which are, or could become, current-carrying except for terminals. R-type TO CBE to EN 60934.

SP 12Amp 250VAC.

Manual Pushbutton Reset.

Series 1658.

Mount: Panel.

Current Rating: 12Amp

Voltage Ratings: 240 VAC, 28 VDC 

Number of Post: 1

Dimensions: 1.279" Long x 0.561" High x 1.284" Deep including 1/4" Male QC Terminals.

Approvals: CSA C22.2 No 235, IEC 60934, UL1077, UL1500

Applications: Battery chargers, consumer products, power supplies, motors.

New Old Stock

Made in the USA.

Learn More

E-T-A - 46-400-P-12 Thermal Circuit breaker.

12Amp 250VAC.

Push button Reset

Vintage ETA - New Old Stock

Made in Germany

Learn More

Sensatec AIRPAX - UPGHX41-25462-1 - Circuit Breaker.

Status: Discontinued

2Pole 30Amp 250VAC with Shunt Trip.

Dual-Rocker, White.

Contacts: 6 - 1/4" Quick Connect Terminals.

Dimensions: 2" x 1.5" 2.5" behind panel.

Learn More

Circuit breakers. SP 10Amp 80V max, 400V. DC Hertz. Delay 52, trip 12.5. Front panel toggle switch. Mount: Panel, 2-1/8" behind panel. Learn More