Line Filter
- Mini Circuit Labs - BHP-50 - Coaxial High Pass Filter. 41 to 800 MHz, 50 Ohm.
Mini Circuit Labs - BHP-50 - Coaxial High Pass Filter.
Rugged Shielded Case
50 Ohm 41-800Mhz,
Stop Band, MHz (Loss>40dB) DC-20, (Loss>20dB) 20 - 26
fco Mhz, Nom. (Loss 3dB) 37
Case Style: FF55
BNC Male to BNC Female.
Dimensions: Length 65.79mm, Diameter 13.72mm
Applications: Lab Use, Transmitters/Receivers, Radio communications
New Old Stock
More info: https://www.minicircuits.com/WebStore/dashboard.html?model=BHP-50%2B
Made in USA
Learn More - TE Connectivity / Corcom - PE0S0DLXC - EMI Filter Power Switch - 10A - P Series Entry moduleOut of stock
TE Connectivity / Corcom - PE0S0DLXC - EMI Filter Power Switch
Manufacturer: TE ConnectivityProduct Category: AC Power Entry Modules
Product: Inlets
Switch Function: Switched
Filtered: Filtered
Fused: Yes
Current Rating: 10 A
Voltage Rating: 250 VAC
Mounting Style: Panel Mount
Termination Style: Quick Connect (0.250")
Filter Type: EMI/RFI Filter
Series: P
Brand: TE Connectivity / Corcom
Compliance: UL
Product Type: AC Power Entry Modules
Subcategory:Power Entry
Part # Aliases: 6609109-4
10A/40ºC, 120/250V, 50-60HZ , Mount - Snap In or Flange Panel, Quick Connect, UL, CSA, VDE Approved,
Datasheet: http://datasheetz.com/data/Connectors/Power%20Entry%20-%20Modules/PE0S0DLXC-datasheetz.html
Learn More - SCHAFFNER - FN-372-6-21 - AC Power Line Entry Module / EMI RFI Fused Filter, 6 AmpIN STOCK - MORE THAN 100 READY TO SHIP!
SCHAFFNER - FN-372-6 - 6Amp AC Power Line Entry Module / EMI RFI Fused Filter
Schaffner Line Filter 6Amp with Dual Fuse Holders, AN IEC 320 inlet. 2- 0.18mHy 2 x 2200pF,
Panel Mount, Solder Lug, Weight 2 Oz, Max Voltage 250V 50/60 Hz, MTBF @ 40C/230V (Mil-HB-217F) 550,000 hours.
UL, (Fuses purchased separately),
Input Power: 4 Power Inputs (100, 120, 220, 240 VAC Drum Selectable)
Connector Style: EC 320-C14
Connector Type Receptacle, Male Blades - Module
Current: UL 6A
Voltage: UL 250VAC Max.
Filter Type: Filtered (EMI, RFI) - Commercial
Accommodates a Fuse Yes (Not Included 20mm x 5mm 6 Amp)
Mounting Type: Panel Mount, Snap-In
Termination: Quick Connect
Features: Voltage Selector
Fuse Holder, Drawer: Fuse Holder, Twin Fused
Panel Cutout Dimensions: 28.5 x 56mm
Panel Thickness 0.031" ~ 0.126" (0.79mm ~ 3.20mm)
Material Flammability Rating: UL94 V-2
Ingress Protection: IP40
Approval Agency: CSA, UL, VDE
Made in Switzerland with Germany Components
Alternates: Mouser 631-FN372-6-21, Digi-Key 817-1170-ND, Newark 11B3185
Typical Uses - Electrical Equipment, Consumer goods, EDP and office equipment, Single-phase Power supplies, Switch mode power supplies, Test and measurement equipment, & medical equipment.
Learn More - SCHAFFNER - FN372-2/A - Filter, Line. 2Amp 125/250VAC. Filtered Power Entry Module.
SCHAFFNER - FN372-2/A - Filter, Power Entry Module.
The FN 370 power entry module combines an IEC inlet, a mains filter with a single or dual- fuse holder
and a voltage selector. Choosing FN 370 product line brings you the rapid availability of a standard filter
associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution
helping you to pass EMI system approval in a short time.Connector Style: IEC 320-C14
Connector Type: Receptacle, Male Blades - Module
Current – UL: 2A
Voltage – UL: 12.5/250VAC
Filter Type: Filtered (EMI, RFI) - Commercial
Accommodates a Fuse: Yes
Number of Positions: 3
Mounting Type: Panel Mount, Snap-In
Termination: Quick Connect
Panel Thickness: 0.031" ~ 0.126" (0.79mm ~ 3.20mm)
Material Flammability Rating: UL94 V-2
Ingress Protection: IP40
Approval Agency: CSA, UL, VDE
Applications: Portable electrical and electronic equipment,Consumer goods,EDP and office equipment
Single-phase power supplies, switch-mode power,supplies,Test and measurement equipment Medical equipment.Made in Switzerland & Germany
Learn More - TE Connectivity / AMP / CORCOM - 20ESK6, F7585 - Filter, AC Line. EMI & RFI 20Amp 120/250V 50/60Hz.READY TO SHIP - ONLY 79 LEFT IN STOCK!
TE Connectivity / AMP / CORCOM - 20ESK6, F7585 Filter, AC Line.
SK Series, Status: Active
EMI & RFI 20 Amp 120/250V 50/60Hz, 10kHz-30MHz SEV VDE UL544.
Low Leakage
Operating Temperature: -10C to 40C
Inductance: 0.06 mH
Housing: Chrome.
Mount style: Flange 2-holes 4.0"spacing.
Connections: Threaded Bolts 8-32 Torque 18lbf-in (2.03 M-m) Max.
UPC: 061068421787
Alternate: 20ESK6, F7585 S0, AMP 1-6609035-3
Dimensions: 5.09" Long x 2.25" Wide x 1.78" High, with Stud Contacts.
Each is Test Dotted.
Weight: 1.2 lbs without packaging.
Application: Electro-Mechanical Noise, Switching Power Supplies.
RoHS Compliant.
Factory New
Learn More - Mini Circuit Labs - BBP-21.4 - Lumped LC Band Pass Filter, 19.2 -23.6 MHz, 50 Ohm.READY TO SHIP - ONLY 29 LEFT IN STOCK!
Mini Circuit Labs - BBP-21.4 - Lumped LC Band Pass Filter, 50 Ohm, 19.2 -23.6 MHz, 50 Ohm.
The BBP-21.4 from Mini Circuits is a Band Pass Filter with Frequency 19.2 to 23.6 MHz, Center Frequency 21.4 MHz, Insertion Loss 1.5 dB, Rejection 20 dB @ 15.5 MHz, Power 0.5 W.
Coaxial Bypass Filter. Technology: Lumped LC
BNC Male to Female.
RF In Male, RF Out Female
50 Ohm Elliptic Response
Low Insertion Loss: 1.5dB
Rejection: 2-dB @ 15.5 MHz
Power: 0.5Watt
VSWR: 170:1
Rugged Shielded Case
Operating Temperature -55C to 100C
RF Power Input 0.5W max.
Dimensions: Length 65.79mm, Diameter 13.72
Applications: High Rejection Applications, Image Rejection, & IF Signal Processing.
More info: http://www.minicircuits.com/pdfs/BBP-21.4+.pdf
Made in USA
New Old Stock - Note:Connector Tarnish does not affect Operation
Learn More - Filtron - FA965B - Filter, Line 20Amp 100VDC. RF/EMI Interference Module.IN STOCK - MORE THAN 100 READY TO SHIP!
Filtron - FA965B RF/EMI Line Filter Module.
20Amp 100VDC.
RF Interference.
Type FA965B.
Mount: Panel with two tabs at 2.4" centers.
Dimensions: 2.027" square x 1.140" high.
Two screw contacts, one each side. 1 terminal in / out
Twice the current capability of Bendix / Sprague (FRI) B778585
New Old Stock
Made in USA
Learn More - ALLEN BRADLEY - AB - 1691-N3 SERIES C - Contact Protector, Snubber, 1 MFD 220-OHMS 150VDC, 120VAC
ALLEN BRADLEY - AB - 1691-N3 Series C Contact Protector / Surge Protector
As a subsidiary of Rockwell International, one of the world's largest technology companies "Allen-Bradley" meets today's challenges of industrial automation with over 85 years of practical plant-floor experience.
Status: Discontinued
Snubber - Time Surge Protector, Two Double (0.110" X 0.032") Tab Terminals
Capacitor 1uF & Resistor 220 OHMS
Maximum Voltage: 120VAC/150VDC
Construction: Sealed Expoxy Enclosure
Mounting: Two Base Holes 0.156" Diameter Spaced 1 9/16" Apart.
Bulletin 1691
Applications: Surge suppressors are used to protect solid state devices against electrical transients which can result whenerver electromechanical devices are operted. Surge Suppressors are for use with relays, timers, AC Contactors,and Starters.
Genuine Allen Bradley - New Old Stock
UL Recognized and CSA Approved
Made in USA
Learn More - SURGE CONTROL LTD - SPP-2204D - Transient Suppressor & Filter.Special Price $28.98 Regular Price $65.00Out of stock
SURGE CONTROL LTD - SPP-2204D Transient Suppressor & Filter.
15Amp 220VAC 50/60Hz.
Design Exceeds ANSI/IEEE C62.41-1991 CAT.B and IEC 801-4 Level 4 Specifications.
5-Screw Terminals = Ground + Line In + Neutral In + Line Out + Neutral Out
New Old Stock
Learn More - Potter USA - 600A10 - Filter, EMI. 10Amp 250VAC. New.Special Price $12.98 Regular Price $18.50READY TO SHIP - ONLY 2 LEFT IN STOCK!
Potter USA - 600A10 Filter, EMI.
10Amp 250VAC.
New Old Stock.
Listed: UL/CSA.
Alternates: TE Connectivity 10VR1, 10VB6, 10ER1, 10VK1
Proudly Made in USA
Learn More - MANNESMANN DEMAG - 469 529 44 - DEMATIK FGB-FILSpecial Price $27.95 Regular Price $35.00FGB-FIL interference suppression filter used for ZMS strain gauge carrier links and FGB-1/FGB-2 frequency generators. OVERLOAD FILTERDEMATIK FGB-FIL 469 529 4464/5 Learn More
- KARKAR ELECTRONICS - KDOV4001D - FILTER 0.5-22 MHzSpecial Price $12.98 Regular Price $18.50READY TO SHIP - ONLY 19 LEFT IN STOCK!
- GENISCO TECH - 07294/GF4200-16 - Filter, EMI. 15Amp 100VDC, 30VAC 400Hz.Special Price $19.98 Regular Price $24.95READY TO SHIP - ONLY 21 LEFT IN STOCK!
GENISCO TECH - 07294/GF4200-16 Filter, EMI.
15Amp
Voltage Rating: 100VDC, 30VAC
Frequency: 400Hz.
Operating Temperature: -55 to 80 Deg C.
New Old Stock
Learn More - SCHURTER - TIMONTA - FKH2-50-4/I - EMC-RFI Filters. 250 VAC 4 Amp with switch and outlet. Used/ As removed from equipment.READY TO SHIP - ONLY 14 LEFT IN STOCK!
SCHURTER - TIMONTA - FKH2-50-4/I Filters.
EMC-RFI suppression
1 Phase, 250VAC 50/60 Hz, 4Amp with Switch and outlet.
2-Pole Switch & drawer for 1 fuse (5X20mm)
Dimensions: Width 50 mm X Height 65 mm X Depth 49.5 mm
Made in Switzerland
Learn More - TE connectivity - CORCOM / TYCO - 1EGG1-2 - Power Entry RFI/EMI Filter 1Amp 250V 50/60Hz.IN STOCK - MORE THAN 100 READY TO SHIP!
CORCOM / TYCO - 1EGG1-2 Connectors, Power.
Power Enry RFI/EMI Filter
1Amp 250V 50/60Hz
Low Leakage (<0.5mA) Flange Mount
Modular, Double Fused (5x20mm - supplied)
.250" (6.3mm) Spade Terminals
Male receptacle IEC320 Standard Power Cord Connector.
For susceptibility applications.
UL CSA VDE listed.
Learn More - Unidentified MFG - 8-484 - RF Filter Assembly with (Two) Female SO-239 RF Connectors.
Filters, RF.
Assembly with Two Female SO-239 RF Connectors.
Partially enclosed with aluminum housing 5-1/16" long x 1-7/8" wide.
Overall with mount 6" long 5-5/16" mount centers.
Learn More - SCHAFFNER - FN375-6 - EMI Filter. 6Amp 120/250VAC.
SCHAFFNER - FN375-6 - EMI Filter.
Status: Discontinued
Power Entry Connectors - Inlets, Outlets, Modules
Series: FN 370
Connector Style: IEC 320-C14
Connector Type:
Receptacle, Male Blades - Module
Current - UL: 6A
Voltage - UL: 125/250VAC
Filter Type: Filtered (EMI, RFI) - Commercial
Accommodates a Fuse: Yes (Fuse Not Included)
Number of Positions: 3
Mounting Type: Panel Mount, Snap-In
Termination: Quick Connect
Panel Thickness: 0.031"" ~ 0.126"" (0.79mm ~ 3.20mm)
Material Flammability Rating: UL94 V-2
Ingress Protection: IP40
Approval Agency: CSA, UL, VDE
Made in Switzerland
Learn More - KEKO VARICON - SV1680K20B - Varistor. 680V.$14.99Circuit protection. Transient voltage suppressors. Varistor. Series SV. Voltage: 680V. Isolation voltage: 2.5KV. Tolerance: 10%. Package: 20mm, radial leads. Operating temperature: 40 to 85 Deg C. Note: Marked KEKO SV680K20. More info: http://www.keko-varicon.si/products/varistors/sv/ Learn More
- TE Connectivity CORCOM - 10ET1 - Filters. EMI 10Amp 120/250V.Special Price $36.98 Regular Price $45.00Out of stock
TE Connectivity CORCOM - 10ET1 - Filters, EMI
Capacitance: 1.77 µF
Current Rating: 10 A
Frequency: 5.06 kHz
Leakage Current: 300 µA
Max Current Rating: 10 A
Max Voltage Rating (AC/DC): 250 V
Termination: Screw
Dimensions: Depth 45.7 mm, Length 119.1 mm, Width 57.7 mm
Case: Two (2) 1/4" Quick Connect terminals in and two out, plus one for ground.
New Old Stock
Learn More - CORCOM - F2328 12-4395-00 - Filters, EMI. 115/250VAC 47-63Hz 15Amp.$15.00Filters, EMI. 115/250VAC 47-63Hz 15Amp. Dimensions: 6.6" long x 3.75" wide x 2.75" high. Used/Removed from equipment. Learn More
- UTC - LMI-55 - 10K to 10Kohm PASS-BAND FILTER$33.00PASS BAND 0 to Fe / STOP BAND 1.5Fe & Higher. 10K to 10K. Shielded - about 1.7" x 1.2" x 2.5" high, with 4 screw terminals for mounting. Learn More
- CORCOM - 20VB1 - EMI Filter. 20Amp 120/250VAC 50-60Hz.Special Price $14.95 Regular Price $19.99EMI Filter. 20Amp 120/250VAC 50-60Hz. Mount: Panel. Listed: UL/CSA. Note: Tyco P/N 1-1609021-1. Learn More
- CORCOM - 20EK1 - EMI Filter. 20Amp 120/250VAC 50-60Hz.Special Price $16.98 Regular Price $24.95Out of stock
CORCOM - 20EK1 - EMI Filter.
20Amp 120/250VAC 50-60Hz.
Mount: Panel.
Listed: UL/CSA.
More info: http://www.te.com/catalog/products/en?q=20EK1
Learn More -