Circuit Protection

NTE Electronics - NTE2V300 - MOV, Metal Oxide Varistor.

280VAC / 370VDC 79 Joules 600mW.

Case: 16mm D disc.

New.

Alternate: ECG2V300.

Learn More

Circuit breaker. 1.5Amp 250VAC / 50VDC with recessed button that can not be pulled out to disconnect circuit - 10-45 second trip time - Carries 100% of rated current, 1/4" QC Terminals.

Learn More

SIEMENS P&B - W58XA4A12B-20 Circuit breaker.

SP 20Amp 250VAC/50VDC.

Thermal-type.

Single hole mount.

Recessed button can not be pulled out to disconnect circuit.

Continuously carries 100% of rated load.

Dimensions: 1.394" wide x 0.660" deep x 1.381" high, plus threaded bushing 0.292" long.

Contacts: 1/4" quick connect terminals.

Learn More

SATO PARTS - F-7135 Fuse Block.

F-7135 is a 250-V, 20-A Fuse Holder. A safe and reliable product made in Japan.

Insulation Resistance (MΩ): 100 or more (DC500V)

Number of Poles: 1Pole

Rating: 250V-20A

Withstand Voltage: AC 1500V (1 minute)

Type: Horizontal Type

Heavy Duty

Material (Insulator): Phenolic (UL94V-0)

Applicable Standard: RoHS compliant

Color (Body): Black

Applicable Fuse Tube Size (mm): Φ10.31×38.1mm (0.40" X 1.5")

Connections: Two Quick Connect.

Dimensions: 2-1/4" long x 13/16" deep x 1-1/8" tall.

Made in Japan

Alternate: F-200-N

Learn More

Circuit breaker. SP 5.5Amp 65VDC. Trip amp: 6.87Amp. Auxiliary switch: 5Amp 250VAC. Note: Double marked: AM1-B1-A. Learn More

E-T-A - ETA - 41-04-PR-6.0A - Thermal Overcurrent Circuit Breakers. 250VAC / 48 VDC 6Amp.

Circuit Breakers Miniaturised single pole thermal circuit breaker with push-to-reset tease free, trip-free, snap action mechanism (R-type TO CBE to EN 60934) for PCB mounting. Approved to CBE standard EN 60934 (IEC 60934).

Status: Discontinued

Thermal Overcurrent Circuit Breakers, 1 Pole.

Solder Terminal Pins for PCB Mount

Max. Voltage: 250VAC / 48VDC

Current Rating: 6Amp.

Internal Resistance: =/< 0.05 ohm

Insulation Resistance: > 100 MΩ (DC 500 V)

Actuator Type: Button

Mount: PCB.

Dimensions: 0.75" Wide x 0.44" High x 1.6" Deep Overall. (27.6mm X 11mm X 19.2mm)

Applications: Motors, transformers, solenoids, printed circuit boards, hand-held machines and appliances, marine applications, caravans.

Approvals: UL CSA

New Old Stock

 

Learn More

ECS INC - ZTA-3.58MG - Filter/Resonator.

Ceramic Resonator 3.58MHz,

Impedance: 30 Ohm. Tolerance: 0.5%.

Supply Voltage: 100V

Dimensions: 10mm wide x 5mm deep x 7.5mm High.

Package: 2 Pin Radial Leads.

Lead Spacing: 5mm.

Note: Extended Temperature Range.

Additional Information: https://ecsxtal.com/store/pdf/ZTAR.pdf

Package of 10.

 

Learn More

277V AC/DC QUIETONE NO PCB'S 60HZ WITH (2) 8 INCH LEADS Learn More

CLARE - CM3P-350L Gas Tube Arrestor.

DC Breakdown Voltage: 350V.

Tolerance: 20%.

Transient Protector.

Impulse Breakdown Voltage: 1200V max.

Capacitance: 2pF max.

Material: Ceramic tube sealed at both by electrodes, and inside it is filled by inert gas.

Package: 3 radial leads.

Lead spacing: 6mm.

Learn More

E-T-A - ETA - 1658-A00-00-P10-20A - Circuit Breaker. Type 1658, 20Amp 120/125VAC, 28VDC, Self Resetting.

Series: 1658       

Type: Thermal Overcurrent        

Current Rating: 20 A      

Voltage Rating AC: 120/125 VAC        

Voltage Rating DC: 28 VDC          

Number of Poles: 1 Pole

Actuator Type: Self-Reset            

Operating Temperature: - 20 C to + 60 C

Dimensions: Height: 14 mm, Length: 27 mm, Width: 32 mm        

Mounting Style: Panel Mount    

Termination Style: Blade     

Unit Weight: 1.304431 oz

Approvals: CSA C22.2 No 235, IEC 60934, UL1077, UL1500

 

Learn More

Littelfuse- 101-001 - Rivet / Eyelet Mount Fuse Clips For 1/4" 3AG Fuses. 

Body Material:   Brass, Nickel Plated

Mount: PCB Chassis Mount

Current Rating: 15 A

Voltage: 250 V

Voltage Rating: 600 V

RoHS: Compliant

New Old Stock

Package of 50

Learn More

LITTELFUSE - 345701A - 03450701H - Fuse Holder

Type: Safe Shock

Mount: Panel Mount - 1 Pole

Fuse Holder, 345 Series Panel Mount Enclosed Fuse Holder, ''Shock-Safe''

Electrical Rating: 20Amp 600VAC

High Profile Screwdriver Head

Right Angle Bottom Terminal

Bottom Terminal is 1/4" Quick Connect

Contact MaTERIAL: bRASS, tIN pLATED

3AG Black Body.

Temperature: -40 C to 85 C

Accepts 3AG, 5 x 20mm, and 2AG fuse sizes

Red Screwdriver Slot Cap (Flush with Holder) with slotted cap, no retaining nut.

Note: 1/2" Plastic Hex Nut with flange Purchased Separately

Alternate 03450701H, 3453HS7-010

 

Learn More

Circuit breaker. SP 65VDC 5.5 Amp. Trip 6.9 Amp. With auxiliary switch 5 Amp 250VAC. Double marked AM1-B1-A. Learn More

ETA - E-T-A - 1658-G21-00-P13 - 1658-G21-00-P13-12A - Thermal Overcurrent Circuit Breaker.

Very cost effective design to meet international requirements. No exposed metal parts which are, or could become, current-carrying except for terminals. R-type TO CBE to EN 60934.

SP 12Amp 250VAC.

Manual Pushbutton Reset.

Series 1658.

Mount: Panel.

Current Rating: 12Amp

Voltage Ratings: 240 VAC, 28 VDC 

Number of Post: 1

Dimensions: 1.279" Long x 0.561" High x 1.284" Deep including 1/4" Male QC Terminals.

Approvals: CSA C22.2 No 235, IEC 60934, UL1077, UL1500

Applications: Battery chargers, consumer products, power supplies, motors.

New Old Stock

Made in the USA.

Learn More

Metal oxide varistors. 100V, 60AC/85DC, 165V clamping voltage, 1watt, 30 joules.Package: 20mm radial leads. Learn More

BUSSMANN - HLQ-1-6/10 - Fuse Holder

Body Material: Thermoplastic

Mount: Through Hole

Current Rating: 1.6 A

Termination: Wire

Voltage Rating (AC): 300 V

300VAC or less HLQ carrier comes with a 6" lead of 18AWG red insul solid copper attached to the line side, non-threaded.

Learn More

Fuse Holders Clips, Open Design for 5 X 20mm fuses.

Material: Solid Brass.

6.3 Amp, 500 VDC/500VAC

Operating temperature: -40 C to 85 C

Mount: PCB.

New Old Stock

Alternates: 0751.0052, OG0751.0052, BK-6005

Package of 20.

Learn More

Filter, power outlet 6Amp 250VAC plus fuse holder. 48-440Hz. 3 Conductor male ac plug. Listed: UL/CSA. Learn More

SCHAFFNER - FS3184-6-16 - Line Filters

110/250VAC 6Amps

Each with wiring harness

Note: Removed from Equipment

Learn More

Circuit breaker. 30Amp 250VAC/50VDC. Pushbutton. Recessed button can not be pulled out to disconnect circuit. Single hole mount. Dimensions: 1.377" wide x 0.660" deep x 1.386" high, plus threaded bushing 0.498" long. Contacts: 1/4" quick connect terminals. Double marked 375-230-101.

Learn More

Mech Products - 1600-122-100 - Circuit Breaker, 10 Amp.125/250

The Series 16 is a proven reliable, single-pole thermal circuit breaker designed for your equipment protection needs in the 0.5 to 70 amp range. The MP Series 16 is suitable for diverse applications such as Medical Equipment, Uninterruptable Power Systems (UPS), Portable Generators, Welders, Industrial Cleaning Equipment, and Transportation.

Minimum Ultimate Trip:The Series 16 offers a minimum ultimate trip of 100% of rated current at 25°C/77°F.

Maximum Ultimate Trip:Below 1A - 145%, Between 1A and 35A inclusive - 135%, At 40A and above - 140% of rated current at 25°C/77°F.

Overload Capacity:10X of rated current for 5.0 A - 70.0A and 6X of rated current for 0.5A - 4.5A.

Dielectric Strength:Series 16 has a dielectric strength that exceeds 1,500V per UL, CSA and VDE.

Ignition Proof:The Series 16 in ratings of 0.5 - 70A conforms to USCG Title33, DFR, Section 183.410(a), per UL1500 standard for safety for ignition-protection test for marine products

Mount: Panel Mount

Connections: Straight 0.250" Quick Connect X 0.032" Thick

Push Button Manual Reclosable.

125/250VAC.

10 Amp Current Rating.

Dimensions: Body Length 1.22"  X Width 0.84" X Thickness 0.56" (31.0mm X 35.0MM X 14.2mm) 

Body Length including contact connections: 1.66" (42.2mm) 

UL, CSA

New Old Stock

Made in USA

Learn More

LITTELFUSE - 342012A Fuses, Holders.

For 20A 250V Fuses.

Size: 1/4 x 1-1/4". (see Attached Detail Print)

Mount: Panel.

Molded Parts: Black Thermoplastic (UL 94V0)

RoHS Compliant.

Learn More

Circuit breaker. SP 20Amp 250VAC. Single hole mount. Resettable pushbutton. Dimensions: 1.150" wide x 0.560" deep x 1.818" high plus threaded bushing 0.409" long. Contacts: 1/4" quick connect terminals. Learn More

Filter. Unknown ratings. Mount: 4 hole. Dimensions: 2" long x 1-1/3" wide x 1" high plus mount 1/3" additional each side with 2" centers. Learn More