Terminal Blocks

WAGO - 261-301 - 136-030 -  Connector, Terminal Block.

Circuit Count: Two Conductor.

Insulation voltage: 300V 500V.

Rated Inpulse Voltage: 6kV

Rated Current: 24 A

2-conductor terminal block

Without push-buttons

With fixing flange; 1-pole; for screw or similar

Mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²

CAGE CLAMP®; 2,50 mm²

Housing Material: Thermoplastic, Gray.

Mounting type: PCB single hole mount.

Outside dimensions: 1/4" wide.

Note: Series 261.

Wire size: 14-16AWG.

Snap together terminals.

Made in Germany

Learn More

Connector, terminal strip. Wire markers only. A-W for terminals strips. Material: plastic, black. Dimensions: 1-1/2" wide x 9-1/2" long. Learn More

WAGO - 261-331 - Connector, DIN-rail Terminal Block CAGE CLAMP 4-conductor.

The 261-331 from Wago is a 4 conductor terminal block with fixing flange. This terminal block is used for screw or similar mounting types and suitable for wire size ranging from 28AWG to 14AWG.

Standard (European) Chassis Mount, with fixing flange mount. Product group 9 (Standard Chassis )

Side Entry: 28 - 14 AWG.

Connector Type Terminal Block

Current Rating: 24 A

Number of Contacts: 4

Voltage Rating: 500 V

Dimensions: Height 18 mm, Lead Pitch   10 mm, Length  28 mm, Width   10 mm

Wire/Cable Gauge: 28 AWG

Flammability Rating: UL94 V-0

Strip Length: 8-9mm / 0.33".

Current Intensity: 24A EN. 10 x 18 x 28mm.

Screwless Clamping System.

Made in Switzerland

Alternate: Newark 29K0197, GTIN UPC 

Learn More

Connector, terminal block. Circuit count: 6 position. Mounting type: PCB. Pin spacing: approximately 0.395" (10.0mm). Connection: Top screw, PC pins. Outside dimensions: 2.336" long x 0.660" wide x 0.757" above board. Note: Bottom of strip is marked A2. Listed: UL/CSA. Learn More

Connector, terminal strip. 3P 5Amp 150V, 18-22AWG. Pitch: 0.25" centers. Operating temperature: 105 Degree C. New, bulk packaged. Dimensions: Overall 1.320" long x 0.557" deep x 0.504" high. Note: 3-1437646-9 EQV. Learn More

Weidmuller - 10200 WDU2.5 - Terminal/Barrier Strip.

Feed thru 800V 24Amp.

Number of Contacts: 2.

2P 1 Position.

Pitch spacing: 5mm.

For Wire Size 26-12AWG.

Terminal Type: Screw.

Mount: Din Rail.

Color: Beige.

Made in Germany

Learn More

WAGO - 249-116 - Connector, Terminal Strip.

The 249-116 from Wago is a 6mm wide grey colour screwless end stop for use with terminal blocks.

Screwless End Stop.

Size: 6 mm / 0.236" wide.

Dimension is 6mm x 28.2mm x 45mm (W x H x D)

Mount: Din Rail.

Color: Grey.

Alternate: Newark 28K2138, Digi-Key 2946-249-116-ND

Learn More

Connector, terminal strip. 7 Position, single row. Mount: PCB through hole, on plastic mount. With 2 holes at 2.2" centers. Dimensions: 1.160" wide x 2.567" long. Learn More

RDI AUGAT - 2ESDV-03-1 -  Connector, Terminal Block.

Circuit Count: 3 Position.

Housing Material: Thermoplastic.

Mounting Type: Vertical, plug-in.

Connection: Screw.

Voltage: 300V

Current: 15A

Pitch: 5.08mm

Wire Size: 14-18AWG solid, 14-30AWG stranded.

Rigth Angle Wire Entry.

Color: Black.

Learn More

Connector, terminal block. Housing gender: plug. Contact gender: male. Circuit count: 6. Contact ampacity: 12Amp. Insulation voltage: 320V. Mounting type: RA, Closed-end. Pin spacing: 5.00mm. Note: Alt P/N: 1757514. Learn More

Connector, terminal block. Housing gender: plug. Contact gender: male. Circuit count: 12. Contact ampacity: 12Amp. Insulation voltage: 320V. Mounting type: Open-ended. Pin spacing: 5.08mm. Note: Alt P/N: 1754630. Learn More

Connector, terminal block. Circuit count: 7 Position (Single). Mounting type: PCB, turret posts. Connection: Top screw. Outside dimensions: 3.238" long x 0.701" wide x 0.565" high. Two mount holes at 2.97". Note: Black. Curtis/Milwaukee. Learn More

Connector, terminal block. Circuit count: 7 Position (Single). Mounting type: PCB,thru hole leads. Connection: Top screw. Outside dimensions: 3.850" long x 1.125" wide x 0.542" high. Four mount holes at 3-9/16". Note: Black. Marked Kulka 671. Learn More

ETC/LTE - TS01-01 - Connector, Terminal Block / Terminal Strip.

1 Pole

Circuit Count: 1 Position.

Temperature: -40 to 266 F

Mount: Flush Panel Mount.

Housing Material: Thermoplastic, Gray.

Mounting Type: PCB, Flush.

Connection: #8 screw.

Outside Dimensions: 1.537" (39.0mm) long x 0.806" (20.4mm) wide. 1-1/8" mount centers.

Genuine ETC/LTE - New Old Stock

Alternate: 599-GP-01

 

Learn More

Connector, terminal block. Housing gender: receptacle. Contact gender: female 5 Position. Single row. Mounting type: PCB Flush. Pin spacing: 5.3mm. Connection: Top screw, RA crimp. Outside dimensions: 0.992" long x 0.458" deep x 0.440" high. Note: Learn More

Connector, terminal/barrier block. Four (4) screw, 25Amp 300V. Material: thermoplastic. Mount: PCB 4 pin RA with 2 mount holes for screws 1-1/8" centers. Screw size: 6/32 x 1/4". Color: black. Listed: UL/CSA. Learn More

TE Connectivity Buchanan - 2MA-03 - 1437669-4 - Connector, Terminal Block.

Status: Discontinued

Circuit count: 3 Position.

Pitch: 5.08 mm

Contact Ampacity: 20Amp.

Insulation Voltage: 300V.

Housing Material: Thermoplastic (Polyamide).

Mounting type: PCB, 45 Degree Angular.

Pin spacing: 5.08mm.

Note: Wire size: 12-22AWG (stranded or solid).

Black.

Series 2MA.

Alternate: Mouser 571-14376694

Learn More

Molex Beau Interconnect System/Vernitron - 38720-7503 - Connector, Terminal Block.

7200 Series

Single Row

Current Rating: 25A

Voltage Rating: 300V

Wire Gage: 12AWG

Temperature: -40 C to 130 C

Material: Thermal Plastic

Circuit Count: 3 Position.

Pitch: 9.53mm

Mounting Type: PCB Pins.

Connection: #6 Screw.

Outside Dimensions: 1.25" Long x 0.60" Wide x 0.70" High.

New Old Stock

Made in USA

Alternate: TE Connectivity / AMP 7-1437657-1

Learn More

WIELAND - Z5.522.7453.0 - Connector, Terminal Block.

Circuit Count: 1 Position.

Mounting Type: Din Rail.

Newark: 01M9526

Equivalent: Multicomp SPC11783

Learn More

RDI - NC6-P108-02 - Dual Terminal Block

Number of Positions:2

Pitch Spacing:9.53mm

Wire Size (AWG):22-12

Current Rating: 20AMP

Voltage Rating: 300V

Wire Gauge: 12-22 

Mounting Type: PC Board Terminal Block Clamp

Type: Barrier

Terminal Block RoHS Compliant: Yes

UL/CSA

Learn More

Connector, terminal block. Circuit count: 8 Position. Mounting type: PCB. Pin spacing: 5.08mm. Connection: screw. Outside dimensions: 1.575" long x 0.50" wide x 1.019" deep. Note: Pluggable. Learn More

Connector, terminal block. Circuit count: 1 Position. Contact ampacity: 30A. Insulation voltage: 600V. Insulation material: Polyamide, nylon. Mounting type: Din rail. Pin spacing: 6.2mm. Connection: screw. Note: 24-10AWG. Color: green/yellow. USLKG5. More info: http://www.phoenixcontact.com Learn More

Eaton Cooper/Bussmann - EM258503V - Connector, Wire to Board Terminal Block.

Circuit Count: 3 Position.

Contact Ampacity: 16Amp.

Insulation Voltage: 300V.

Mounting Type: PCB, Right Angle (RA) Wire Entry.

Horizontal with Board.

Accepts Wire Size: 12-26AWG.

Euro-Mag.

Features: interlocking (side).

Alternate: TE Connectivity 282836-3

Learn More