|
Mfg. Name |
Mfg. Part# |
Product |
Unit Price |
Add To Cart |
| |
| |
UNKNOWN
|
MS-229
|
(almost) 2 x 2 x 1.5" BLACK BOX
|
$1.50
|
|
|
BLACK BOX 1.85"L x 1.83"W x 1.46"H IT also has a mounting ear at each end No lids. |
| |
| |
BUD INDUSTRIES
|
CU123 / 38568
|
1 x 1.5 x 3.6'' 2-piece Black Aluminum Boxes
|
$4.95
|
|
|
1.06 x 1.5 x 3.62" Blk enclosure anodized die-cast Aluminum, close fitting flanged lid fits to body with four screws (original box, but screws not included) 4-small holes in cover 0.25"(2) and 0.10"(2), and one 1/4" at one end of box for cable or LED or escape . . . |
| |
| |
HOFFMAN
|
F-44WN1
|
1-IN WIREWAY NIPPLE A Wireway Fitting
|
$66.00
|
|
|
1-IN WIREWAY NIPPLE A Wireway Fitting |
| |
| |
BUD INDUSTRIES
|
PCB-11457-B
|
1.75 x 5 x 5'' Black plastic PLASTICASE
|
$8.50
|
|
|
Sturdy Black Enclosure, high quality impact resistant plastic. 1.75H x 5.1W x 5.3"D Two panels 1.52 x 4.9", one has 3 pop-outs & LID - has 9V battery compartment - modern, sloping shape. |
| |
| |
PLATT LUGGAGE
|
50K CASE
|
10x7x2.5" CLOTH CASE WITH FOAM INSERTS
|
$9.99
|
|
|
CLOTH CASE WITH FOAM INSERTS 10inch X 7 1/2inch X 2 1/2inch Black codura padded zipper case makes a perfect presentation case for small instruments or small parts. |
| |
| |
HOFFMAN
|
A-15R124
|
15 x 11 x 4" Tan Steel Enclosure
|
$15.00
|
|
|
TAN STEEL ENCLOSURE 15" x 11.5" W x 3.75" D (I.D.) The cover will slide off the top of the box. It has 2 screws for securing. and a place for a small padlock. There are 1" flanges on top & bottom, for easy mounting. |
| |
| |
CUSTOM
|
594
|
15"x12"x4" Hinged Steel Cabinet
|
$19.95
|
|
|
15" LONG X 12" WIDE X 4" DEEP STEEL CABINET 0.065" - Non removeable hinged steel cover closed with two screws. Heavy cover has one punched slot 1" x 0.47" and has Four 1/4" holes in the rear for mounting. Has 2 fuseholder knockouts, 2 D25 holes and 1 MS-conn hole and a general purpose rectangle 1.24"x1.58" you could stick a dollar bill thru. Weighs about Ten pounds. |
| |
| |
Generic
|
MS-283
|
2 x 3/4" Pink Plastic with lids
|
$0.45
|
|
|
ENCLOSURES,SMALL PARTS BOXES, PINK PLASTIC, 2 1/8" X 3/4" TALL with top. |
| |
| |
CUSTOM
|
9-006
|
2'' Speaker & Microphone in a black box 4 x 3 x 1.4"
|
$1.49
|
|
|
Black Box with 2"Speaker and Condenser Microphone.
4.2" x 3.1" x 1.4" overall - Hinged Lid with screws. High Impact Plastic! Appears good for intercom, alarm system, plenty of room for circuitry.
Take them all and buy them cheap. Same as 9-005 but no AA battery holder |
| |
| |
Generic
|
MS-030
|
2.47"L x 1.92" W x 3.30"
|
$1.00
|
|
|
BLK PLASTIC ENCLOSURE WITH LIDS ( ID. APP. 2.47"L x 1.92" W x 3.30" H ) OUTSIDE DIM. 3.5"L x 2.25" W x 3.5" H HAS 4 MOUNTING TABS ON BOTTOM. |
| |
| |
MIDWEST SERVICE
|
9-085
|
2.8"x2.2"x1" 2-part Black plastic box
|
$1.75
|
|
|
Enclosures black plastic - 2.8" x 2.2" x 1"tall has two mounting feet - Marked "THE FORCE" has four small holes on top/in front -2 PART |
| |
| |
GUARDIAN
|
Road Case
|
20 5/8in L x 17 1/2in W x 22in Deep O.D.
|
$75.00
|
|
|
This case protects anything that needs to travel from highly sophisticated electronics, computer servers, professional audio devices and broadcast electronics. Full- length piano type hinge, large recessed, dish mounted twist catch. Padded with atleast 2 1/2 in or more of foam. Other sizes available! |
| |
| |
UNMARKED
|
8-043
|
3" square x 1-1/2" Black Plastic Box with Lid
|
$2.75
|
|
|
Nice project box. One semicircular hole about 11/16" x 3/8" for wires. Bottom plate lifts off with five pins holding it securely in place. Inside Dimensions 2-3/4" square x 1-1/4" deep. Two mounting flanges on opposite sides of bottom, mounts on 3-1/4" centers. |
| |
| |
BYRD
|
MS-288
|
3"round box - perfect for concealing tiny video cameras
|
$3.75
|
|
|
SURTEMP ENCLOSURE ONLY 3" ROUND 1.68" THICK GREAT FOR HIDING CAMERAS |
| |
| |
GARY PLASTIC PACKAGING
|
5-502
|
3-5/8" wide x 7 " long and is 5/16" deep
|
$0.49
|
|
|
New White plastic project box , base is 3-5/8" wide x 7 " long and is 5/16" deep with a hinged top with the same dimensions |
| |
| |
BUD INDUSTRIES
|
60-2380-WH
|
3/4'' Tall White 19'' Rack Shelf
|
$15.00
|
|
|
19" White RAK Shelf 19" across x 19.25" deep and 0.75" high. |
| |
| |
POLYCASE PRODUCTS
|
MS-227
|
3inch X 4 1/2inch X 2 1/4inch W/MT FEET BLK PLAS ENCLOS
|
$4.50
|
|
|
|
| |
| |
UNMARKED
|
8-951
|
4 x 3 x 1" BLACK ENCLOSURE with mounting flanges - no lid
|
$1.00
|
|
|
BLACK ENCLOSURE - NO LID (MT. EAR ON EACH END) 4" X 2 3/4 "X 1" |
| |
| |
DAKA-WARE
|
MS-281
|
4 x 4.75 x 1.75" Black Box, Lidless
|
$2.75
|
|
|
BLACK ENCLOSURE 4" X 4 3/4" X 1 3/4" NO LIDS (NO HOLES) |
| |
| |
UNMARKED
|
056-5155C
|
4" x 2.7" x 1" Inside Dimensions Transparent Housing
|
$1.75
|
|
|
It's a tough clear plastic cover for Something that wants to be seen, or admired. 1.1" High x 3" wide x 5.7" Long including rounded edges for mounting. Excellent Museum piece Cover. Two Protected Mounting holes offset, about 4.9" apart. |
| |
| |
UNKNOWN
|
8-560
|
4-1/2 x 2-3/4 x 1-5/8" high.
|
$1.95
|
|
|
White Plastic Enclosures w/o lids 4-1/2 x 2-3/4 x 1-5/8" high.
Scratched. |
| |
| |
POLYCASE PRODUCTS
|
EP-8
|
4.5" x 6" x 2.25" Black Plastic Project Box
|
$4.95
|
|
|
4-1/2" x 6" x 2-1/4" black PLASTIC enclosures WITH LIDS |
| |
| |
Generic
|
MS-232
|
4.9" x 4.6" x 1.4"high Black Enclosure
|
$0.85
|
|
|
ENCLOSURES 4.9" x 4.6" x 1.4"high
Ribbed Black Box Almost Square w/Battery Compartment. Has three mounting feet 4-7/8" x 4-9/16" x 1-3/8"
SALE 144 to a CASE = 144@$0.85 EACH |
| |
| |
HAMMOND MANUFACTURING
|
1414SCA
|
4X4X3 JUNCTION BOX
|
$15.99
|
|
|
|
| |
| |
CUSTOM
|
8-155
|
5 x 4 x 2" Hinged enclosures locking instrument case
|
$4.95
|
|
|
Hinged ENCLOSURES 5.3" x 4.4" x2.3"hi INSTRUMENT CASE With Sliding Clasp for keeping the lid shut - has two small countersunk holes in bottom of case for mounting PC board OR mounting to something external - Very Nice cases - grey |
| |
| |
UNMARKED
|
MS-244
|
5.5 x 4.5 x 1.75" Black plastic
|
$2.25
|
|
|
ENCLOSURES 5.5" x 4.5" x 1.75" BLACK PLASTIC BOX 2-PIECE Two long mounting holes - small 1.6" wide access slot in rear 0.3" high - New |
| |
| |
Plast-A-Matic
|
Project Box
|
5.5" x 2.8" x 5.2" plastic 2-pc
|
$2.88
|
|
|
2-pc Top & Bottom - Gray Instrument Enclosure - snaps together, requires 4 screws (not included) front panel would be about 5.25"wide x 2.5" tall (not included). New 138 x 71 x 130mm deep |
| |
| |
Generic
|
5-477
|
6" x 3" x 1.5" WHITE ENCLOSURE
|
$4.95
|
|
|
WHITE ENCLOSURE CASE FROM Oxygen Sensor 6.5"x3.25x" W x 1.5"Thick
has a compartment for a 9v battery - new |
| |
| |
CUSTOM
|
9-005
|
Black Box with Speaker & Mike & 4AA Battery Holder
|
$2.49
|
|
|
Black Box with 2" 8-ohm Speaker, Condenser Microphone and 4xAA Battery Holder (not pictured)- No bottom to Battery Holder compartment. 4.2" x 3.1" x 1.4" overall - Hinged Lid. High Impact very black Plastic! Great for intercom, alarm system, surprise box, plenty of room for circuitry. Take them all and buy them cheap. |
| |
| |
Generic
|
MS-308
|
Black Flange-mount enclosures with lids
|
$4.95
|
|
|
Black enclosures with lids, Flange Mount black plastic(Hard to photograph) 7.5" x 4.5" x 2.25" OD less 0.7" wide flanges with four mounting holes. Metal inserts for mounting front panel. Box has irregular 1" x 1.16" hole for molex connector or mouse exit and three 0.157" holes in bottom. Very hansome project box. |
| |
| |
HAZEL
|
BoxORC1
|
Black Vinyl Tool Case 7x4x1'' w/ snap lid
|
$1.75
|
|
|
a rather nice, slightly padded and reinforced inexpensive vinyl case with a snap lid. We've found several uses housing expensive parts in our inventory here at ESI.
Approx 7"L x 4"W x 1"Deep for Your keepsakes, small tools, replacement parts, anything you'd like to keep in your own personal BLACK BOX. |
| |
| |
EDWARDS SIGNALING PRODUCTS
|
349
|
CAST BACK Box for 6 inch 340 Bells.
|
$39.95
|
|
|
CAST BACK Box for 6 inch 340 Bells.
Weatherproof outlet box Factory new
Ind manuf bx's. |
| |
| |
UNMARKED
|
5-504
|
Clear Plastic Box 5 x 7-1/2" x 1/2"
|
$0.33
|
|
|
Clear Plastic Box 5" wide x 7" long x 1/2" thick. |
| |
| |
UNMARKED
|
9-155
|
CLEAR PLASTIC CASE FOR CASS. 8/$2.50
|
$0.00
|
|
|
CLEAR PLASTIC CASE FOR CASS. 3/$1.00 |
| |
| |
HOFFMAN
|
C-P3030
|
CONCEPT PANEL
|
Contact Sales
|
|
|
PANEL FOR HOFFMAN ENCLOSEURES |
| |
| |
HOFFMAN
|
X-DS166
|
DOOR 61.25inchH x 23.25inchW WHITE WITH LATCH HARDWARE.
|
$95.00
|
|
|
|
| |
| |
RITTAL CORP.
|
AE1060600
|
DOOR WALL MOUNT ENCLOSURE NEMA 4 Approx 2-foot x 2-foot x 8-Inch
|
$100.00
|
|
|
SINGLE DOOR WALL MOUNT ENCLOSURE (NEMA 4) APP. 600mm x 600mm x 210mm Deep 26# |
| |
| |
HOFFMAN ENGINEERING
|
AEK115
|
ELECTRICAL INTERLOCK 115/60
|
$278.97
|
|
|
provides positive internal sefaty lockout on electrical enclosures while equipment is energized. Used with standard Hoffman door latching mechanisms. All 2-door or free-standing Type 12, or single door Type 12 Enclosures with latch kits installed. 115VAC 60Hz ELECTRICAL INTERLOCK |
| |
| |
HOFFMAN
|
AEK115NDH
|
Electrical Interlock Enclosures 120/110VAC
|
$296.95
|
|
|
provides positive internal sefaty lockout on electrical enclosures while equipment is energized. Used with standard Hoffman door latching mechanisms. All 2-door or free-standing Type 12, or single door Type 12 Enclosures with latch kits installed. 115VAC 60Hz Electrical Interlock 0.10/0.12 Ampa 60/50Hz. NEW
|
| |
| |
CUSTOM PLASTIC INJECTION
|
MS-231
|
ENCLOSURE 4 1/2" X 2 3/8" X 15/16" BLK PLASTIC
|
$1.45
|
|
|
ENCLOSURE BLK PLASTIC 4.6" x 2.4" x 1" Has one slot 1.9" x 0.1" in one end
also has one mounting tab with 0.2" hole (25/$30) 4-1/2" X 2-3/8" X 15/16" |
| |
| |
CUSTOM
|
5-027
|
Enclosure 7 x 5 x 3 " Wedge No-Lids
|
$1.00
|
|
|
7" x 5.4" x 3" OD two 0.4" wire holes wall mount wedge-shaped enclosure
plastic W/O lids. |
| |
| |
Generic
|
MS-241
|
ENCLOSURE CLEAR PLASTIC PARTS BOXES
|
$0.25
|
|
|
4 5/16" L x 1 7/16" W x 7/8" H
Boxes are clear - not gray like in the picture. |
| |
| |
DREXELBROOK
|
285-1-42 series
|
ExplosionProof Blue Housing 3.75"OD
|
$45.00
|
|
|
This 286-1-42 and-43 series housing is EXPLOSIONPROOF AND DUST IGNITIONPROOF - 3.75" OD, two piece Unscrews in middle, reased threads, about 6" High. Two One Inch threaded Ports opposite sides. RATING:FIV-1 CLASS-I GROUPS ABCD, CLASS-II GROUPS-EFG, CLASS-III, NEMA 1, 4, 4X 7 ABCD, 9 EFG, 12 13 on top of all that, it's a very attractive blue. |
| |
| |
KRALOY
|
MS-271
|
FD SERIES 2 X 4 GREY PLASTIC ENCLOSURE
|
$2.00
|
|
|
|
| |
| |
HOFFMAN
|
A-753PC1
|
FIBOX 125MM X 175MM X 75MM #50550
|
$20.00
|
|
|
|
| |
| |
HOFFMAN
|
A84PM40G
|
Galvanized steel Panel 80 x 40
|
$425.00
|
|
|
Galvanized steel Panel for Enclosures , 80 x 40
corrosion resistant (72.00 x 33.75")(1829 x 857mm) |
| |
| |
PC-Gehause
|
M238/-2238000
|
GREY LID PLASTIC BOX
|
$8.50
|
|
|
GREY LID PLASTIC BOX Aprox 6.25x4.75x3.5"OD - WEATHER-RESISTANT GASKET - WITH MOUNTING HARDWARE - NEW - ONE/BOX - VERY NICE
(MANUF. PC-GEHAUSE) |
| |
| |
PACTEC
|
CM6-225
|
GREY PLASTIC ENCLOSURE APP. O.D. 6inchSQUARE 2.5inchTHICK WITH 2 END PLATES
|
$12.00
|
|
|
|
| |
| |
PACTEC
|
K-CNL-0006BK
|
Hood Enclosures for DB25 connector and printed circuit board
|
$0.95
|
|
|
Hood Enclosures for DB25 connector - 3.6"L x 0.81/0.94"H x 1.7/2.3"W
accepts PCB approx 1.5 inch x 2.5 inch.
blank DB-25(CC) |
| |
| |
PACTEC
|
PC-11444-B
|
INSTRUMENT ENCLOSURE 7" x 5" x 1.5"
|
$7.85
|
|
|
Black ABS plastic Enclosure / Instrument Case or Secret Stash box. It's slanted on the side, Futuristic-looking (or is the future already here?) Box measuring 7.25" x 5" X 1.5" consists of 4-pieces Top and Bottom each of which have eight small spacers about 3/16" high for mounting printed circuit boards or whatever your pleasure, and two blank end panels awaiting your drilling, machining or ignoring. Actually if you still have some Federal Reserve notes or other important scrap paper a whole healthy stack will fit inside quite nicely. Nice & New. |
| |
| |
RITTAL CORP.
|
KL1540210
|
KL SERIES WALL MOUNT JUNCTION BOX. ( 600mm W x 400mm H x 120mm D )NO MOUNTING PLATE 10#
|
$50.00
|
|
|
|
| |
| |
UNMARKED
|
8-999
|
L-12" x W-7-1/8" X H 3-1/2"
|
$7.50
|
|
|
New hinged black metal enclosure L-12" x W-7-1/8" X H 3-1/2" |
| |
| |
HOFFMAN ENGINEERING
|
A LFSWD
|
LIGHT SWITCH ASS. FOR HOFFMAN ENCLOSERES
|
$5.00
|
|
|
|
| |
| |
ESI
|
BigBox30
|
Locking Steel Enclosure w/ Door 30x20x9
|
$175.00
|
|
|
Looks like a Hoffman enclosure, wall mount with weathertight gasketing, EMKA square key lock (key included!) Overall 30"H x 20"wide x 9.75"Deep. Open the gasketed door with attached square key (Padlock ready also) and discover the wall . . ! or whatever you put behind the box thru the 24"Hx13"W cutout. Two conduit knockouts, pre-knocked on botton (or top). Mounting flanges extend approx 2.7" behind cabinet. New - grey - Nice (and Heavy) |
| |
| |
HOFFMAN ENGINEERING
|
A-36N24BLB
|
MED TYPE 1 ENCLOSURE
|
$40.00
|
|
|
|
| |
| |
UNMARKED
|
0270062-05
|
Metal ID: 3" x 2.3" x 1.8"
|
$9.99
|
|
|
Metal Enclosures 3.107" wide x 2.5" tall x 2" deep ( 2-parts), no side panels.
( ID: 3" x 2.3" x 1.8" ) |
| |
| |
ALLEN BRADLEY - AB
|
800T-3TZ
|
Nema Type 4,13 Die cast enclosure 3-Holes
|
$19.99
|
|
|
Nema Type 4,13 Die cast enclosure 3-Holes surface mounting |
| |
| |
Generic
|
MS-223
|
New Black Plastic Enclosures Complete with Lids
|
$2.00
|
|
|
New Black Plastic Enclosures Complete with Lids = Unit has 4 screw holes in lid with incorporated base mount. Enlosure is 3-1/4" x 2.4" x 1.1" gefore measuring the mount. Base is 4-1/4" with 2 holes for a possible 6/32 screw.
Hardware is not included. |
| |
| |
BELL ELECTRIC
|
940
|
Outlet Box Extension Adapter
|
$3.95
|
|
|
UNIVERSAL Electrical box Outlet Extension allows "take-off" for installation of new lighting, now duplex outlets, new switches! Fast, easy mounting - aluminum finish with weatherproof rubber gasket, Two 1/2" outlets, one at each end. 5.25" x 3.5" x 1.5" high. Original box. |
| |
| |
PACTEC
|
93708-501-000
|
PACTEC ENCLOSURE
|
$7.50
|
|
|
PLASIC ENCLOSURE FOR HAND HELD ELECTRONICS
|
| |
| |
PC-Gehause
|
M238G/02238100
|
Plastic Box/Enclosure 6x5x3" Clear lids
|
$8.95
|
|
|
Plastic Box/Enclosure Clear lids Aprox. 6.25x4.75x3.5"OD - Weather Resistant gasket with mounting hardware NEW - One/Box and Very nice. |
| |
| |
Generic
|
MS-243
|
Plastic enclosures 2-3/8" x 3/4" x 7/8"
|
$1.00
|
|
|
Black plastic enclosures 2-3/8" L x -3/4" W x 7/8" deep.
No lids. each has a mounting ear on each end & a 1/4"hole in the middle
of one side |
| |
| |
JENSEN
|
8-069
|
REPLACMENT PROJECT BOX - BOX ONLY
|
$2.50
|
|
|
REPLACMENT SUBSTITUTE PROJECT BOX 4 1/4"X 4" X 1"
FOLDABLE 900MHZ FAKE ANTENNA SCREWS ON BOTTEM TO OPEN |
| |
| |
CARAVAN PROTECTIVE CASES
|
4X4-591
|
ROAD / SHIPPING CASE
|
$125.00
|
|
|
shipping container made for gould instruments |
| |
| |
CARAVAN PROTECTIVE CASES
|
CL-412045-2
|
ROAD CASE 20x14x23-Inches
|
$89.00
|
|
|
new SHIPPING CONTAINER with nice black foam inside. OD: 23"w x 20"d x 14"h |
| |
| |
RITTAL CORP.
|
AE1360600
|
SINGLE DOOR WALL MOUNT ENCL. (NEMA 4) APP. 600mm H x 600mm W x 350mm D. 31#
|
Contact Sales
|
|
|
|
| |
| |
RITTAL CORP.
|
AE1076600
|
SINGLE DOOR WALL MT. ENCLOSURE (NEMA 4) APP. 600mm x 760mm H x 210mm D 71#
|
$125.00
|
|
|
|
| |
| |
HOFFMAN
|
6960B
|
STEEL ENCLOSURES 10"x8"x4"
|
$17.50
|
|
|
STEEL ENCLOSURES - NO FACE PLATE - 4-HOLE WALL MOUNTING FLANGE 0.75"W ON EACH END (4) - 7/8" Conduit Holes, two on one long side, one at either end. Very Heavy Duty - Grey - 8"W X 9.75"H X 3.75"D-NW |
| |
| |
HOFFMAN
|
C-SD16128
|
steel Wall Mount Enclosure 16"h x 12"w x 8"d
|
$59.00
|
|
|
Sturdy Wall Mount Enclosure Modified with a 6-1/2" hole in bottom for Fan - NEMA 4; - Steel 16 Gauge- Gray; Hinged Solid cover; Latching with 1/4 Turn Slot; Height- 16inches Width-12inches Depth-8 Mounting - Internal Holes - NEW, Mfr Box |
| |
| |
HIRSH CO.
|
TST1 TST2 TRST3 TST4
|
SWITCH and OUTLET BOX w/ 18"cord
|
$4.95
|
|
|
SWITCH and OUTLET BOX and 18inch power cord. 5inchwide with mounting brackets 2.5inch tall and 1.8inch deep 12 AMP 3/4 HP Grounded Receptacle in back and 18inch 3-Conductor Cord on side. Very Black. |
| |
| |
WESTINGHOUSE
|
55SI03-10
|
Transparent Glass faced 5.5" Round Enclosure
|
$24.99
|
|
|
Nice WeatherProof enclosure with unlatchable, removeable Clear Glass Cover about 4.5" diameter. Contains a 4 to 20 mA DC Meter with a face that reads 10 to 0.1 %Oxygen. Four-Inch ID Xcellent Cameraor Instrument Housing. On a conduit fitting, awaiting your pipe & proprietary contents. |
| |
| |
UNKNOWN
|
KS300
|
TRANSPARENT PLASTIC COVER 06WX8224
|
$2.00
|
|
|
|
| |
| |
RELIANCE ELECTRIC
|
0554
|
Weather-resistant Heavy-duty Steel Enclosure
|
$69.00
|
|
|
HEAVY DUTY STEEL CABINET (GREEN) 23" WIDE X 15-3/4" DEEP X 25" TALL SUITABLE FOR OUTDOOR MOUNTING TO A TELEPHONE STYLE POLE 1/16" THICK STEEL VENTILATED WELL / HAS TWO SHELVES / TWO CARRYING HANDLE / TOP LIFTS UP AFTER LOCK HASP ON RIGHT SIDE IS RELEASED AND THE FRONT DOOR OPENED |
| |
| |
EDWARDS SIGNALING PRODUCTS
|
349
|
WEATHERPROOF OUTLET BOX (GREY)
|
$7.50
|
|
|
CAT. #349 WEATHERPROOF BACK BOX (GREY) |
| |
| |
HOFFMAN
|
MS-209
|
Weatherproof Steel Electrical Box
|
$8.00
|
|
|
Weatherproof Steel Electrical Box 3/4" to 1/2" Conduit splice adapter box.
Metallic gray paint. Inside 2-3/4" x 4" x 2-1/2" deep , 0.085" thick. Overall 3.08" x 5.23" Mounting brackets have (4) slotted holes. A 0.68" hole in one end and a 0.867" hole in the other end. iNSIDE COVER HAS RUBBER SEAL. |
| |
| |
GARY PLASTIC PACKAGING
|
5-502-1
|
white & clear box
|
$0.49
|
|
|
same as 5-502 except it has a clear top & white bottom |
| |
| |
HOFFMAN
|
X-PT68
|
WHITE Steel Pagoda Top 31.5"H x 23.25"W
|
$45.00
|
|
|
WHITE Steel Pagoda Top 31.5"H x 23.25"W
with a 7.5" square hole in the middle. #25 lbs.
|
| |
