|
Mfg. Name |
Mfg. Part# |
Product |
Unit Price |
Add To Cart |
| |
| |
MAXON
|
46.032.032-22.00-125
|
0.5-12, 24VDC? PM MagicMotor 32mm dia
|
$189.00
|
|
|
BEAUTIFUL HIGH TORQUE, VERY HIGH EFFICIENCY small DC Motor. Started turning at less than a Volt ! APPROX 25RPM at 6VDC (nobody has a watch anymore) 32mm dia x 113mm long plus 17mm long shaft w/flat 6mm diameter. |
| |
| |
ESCAP
|
23-D-21-213-B2X2
|
1-36VDC TACH 100-12000 RPM MOTORS
|
$24.95
|
|
|
1-36VDC 12K-RPM Precision DC Motor & Tachometer 100-12000 RPM MOTOR
Made in Switzerland by trained Swiss professionals - some spex available -
23mm diameter x 60mm plus 20mm long 3mm shaft - Two holes for the motor and Six holes/pins for feedback information - Beautiful ! 12,000RPM is Fast |
| |
| |
JOHNSON
|
5-406
|
12-150VDC MOTORS
|
$6.95
|
|
|
12-150VDC MOTORS - QUIET & HIGH TORQUE - High Efficiency
1.25" x 1.5" x 3.5"Long including shaft 0.167"Dia x 0.55"Long NON REVERSABLE |
| |
| |
HAYS REPUBLIC CORP
|
A10026-00-C01
|
12V Linear ACTUATOR 15-pounds 2-inches in 2-minutes
|
$29.95
|
|
|
12 VDC linear ACTUATOR travel 2" force 15lbs time 2 minutes ~~~
motor is a Swiss Maxon DC model# 2326.949-12.111-025 |
| |
| |
BARBER COLEMAN
|
FYQM63200-25
|
12VDC 1200-RPM 150MA Reversable Permanent Magnet MOTOR 1.25inch X 2inchL.
|
$4.95
|
|
|
|
| |
| |
JABSCO
|
152910
|
12VDC 4.4RPM Geared DC Motor
|
$19.99
|
|
|
12VDC 4.4RPM Geared DC Motor, Overall 1.449" dia round x 1.833" tall, shaft is 1/4" shaft flattened on one side x 0.697" long. Relipro, (2) 1/8" solder terminals
Operate 3.5-12Vdc |
| |
| |
BUEHLER
|
1.13.022.212.04
|
12VDC 51RPM Motor & Gear Assembly
|
$19.88
|
|
|
Motor (31mm dia) assembly with gold brass worm gear driving white plastic two-tiered gear driving a 50mm black plastic gear with a 8.3mm plastic nib to provide reciprocating action. Fun to watch but keep inquisitive fingers outta the gears. 1/2" radius of rotation on nib. Steel mounting bracket. 3" leads 51RPM-12VDC 40mA NoLoad 860mA-Stall 104RPM-24V 50mA 1.7A stall. Very Nice. 3/4-pound 5.5" x 3" x 2" high.( Looks New ) |
| |
| |
BUEHLER
|
1.13.043.242
|
12VDC PM 2300RPM Reversable Motor
|
$12.95
|
|
|
Xcellent condition 12VDC 2300RPM Useable to 24VDC 4700-RPM-Unloaded.. 40mm diameter x 83mm long with 50mm long 4mm steel shaft. Front Ball Bearing, Rear sleeve bearings. Three threaded mounting holes in front. 3" wire leads. |
| |
| |
JAMECO
|
155854
|
12VDC Reversible Geared Motor
|
$19.99
|
|
|
12VDC Reversible Geared Motor 65ma 87RPM no load, GH35GM Series,
Operate 3-12VDC |
| |
| |
BODINE ELECTRIC CO.
|
33A5BEPM-W2
|
130VDC PM Gearmotor Reversible 181-RPM 1/8HP
|
$222.88
|
|
|
130VDC 0.91A Ratio:13.8:1 181-RPM Continuous Duty 31-Lb-in INS:B8 FF:1.0 40C-ambient PM Reversible |
| |
| |
Dayton Motor
|
4Z128A
|
167-RPM 1/8HP 90VDC 43 In-Lbs
|
$95.00
|
|
|
MAXTORQ Permanent Magnet DC Gearmotor 167-RPM 1/8HP 90VDC 1.5A-FL armature - 43 In-Lbs - 11:1 Continuous Duty SF1.0 |
| |
| |
RELIANCE ELECTRIC
|
T56H1033T-NR
|
180VDC 1HP TENV MOTOR
|
$300.00
|
|
|
180VDC 1HP TENV MOTOR 1725 RPM TOTALLY ENCLOSED NON VENTED.
LOOKS IN GOOD COND. |
| |
| |
BUEHLER
|
1.13.043.218-9 3140-0858
|
19V [ 3-24VDC ] Reversable 50-100mA High Performance
|
$9.95
|
|
|
19.1VDC = 3-24VDC REVERSABLE MOTOR 50-100MA 1.58"OD x 4.16"Long overall Including shaft and attached pulley gear 0.32"DIA- HI PERFORMANCE
1.13.043.218-9 |
| |
| |
ORIENTAL MOTORS
|
AXUM425-GN
|
2000-RPM Brushless DC Motor
|
$69.00
|
|
|
25W 2000RPM Factory new VEXTA Brushless DC motor - worm-screw shaft
No controller
|
| |
| |
BUEHLER
|
1.61.031.111.06
|
21RPM 12VDC GearHead Motor - Right Angle
|
$27.98
|
|
|
High Torque 90Deg Right-Angled Gearhead DC Motor rated: 10RPM-6VDC 21RPM-12VDC and 42RPM-24VDC 300mA with no load Motor is 54mm dia x 161mm long including removeable / reversable steel shaft inside collett. With removeable 2-point mounting bracket, wire leads. 4.5A Stall @ 12V Sure looks new to me. Weighs 3-pounds ( Looks New ) |
| |
| |
ICC
|
12953-160-209
|
22VDC 1-Oz-In @ 5248-RPM
|
$14.95
|
|
|
PM DC Motor, speed varies w/ voltage and direction with polarity, naturally. 1.15" Diameter x 3" including 0.127"/3.2mm shaft. Relatively High Torque, quiet. |
| |
| |
PITTMAN
|
MT8312E721
|
24VDC
|
Contact Sales
|
|
|
|
| |
| |
PITTMAN
|
MT9423G186
|
24VDC
|
$29.00
|
|
|
24VDC dual speed . 2000rpm@2amp on one set of connections or 1000 rpm @ 3.5amp on the other set of connections.Motor with shaft measures 4 3/8" long x 1 5/8" diameter. |
| |
| |
MICRO SWITCH
|
33VM82-020-11
|
24VDC Control Motor with Tachometer
|
$269.55
|
|
|
24VDC Control Motor 5.7Oz-In/Amp Torque Constant. Rotor Inertia: 60 Oz-In-Sec*Sec 6.6Amps RMS. Terminal Resistance 85-Ohms. 4"OD x 6.4" long including DC ANALOG TACHOMETER: Voltage Constant: 2.5V/KRPM. Terminal Res: 50-Ohms. Voltage Ripple: 1.5% P-P with 0.5" Dia shaft with 1.6" dia rubber? wheel. |
| |
| |
BARBER COLEMAN
|
CYQM-23360-3-4
|
24VDC MOTOR 4750-RPM - 2.0"-OD x 3.03" Long including shaft -0.125"diameter
|
$12.95
|
|
|
|
| |
| |
PITTMAN
|
MT9413G112
|
24VDC MOTORS USED
|
$29.00
|
|
|
24VDC REVERSABLE 200MA DRAW @3750 RPM ON ONE SET OF FRONT CONTACTS AND 350ma@ 9000 RPM ON THE OTHER SET OF REAR CONTACTS . THERE ARE 2 SETS OF CONTACTS FOR POWER ON THIS MOTOR 3 15/16" LONG X 1 5/8" DIAMETER THERE IS A 3/16" SHAFT X 1/2" LONG |
| |
| |
ESCAP
|
R32 29 416
|
28D11219E4 DC Motor with above gearbox
|
$289.00
|
|
|
Motor 28mm dia x 65mm Mounted into GearBox 32mm dia x 50mm. Large Gear on quarter inch shaft. With nice mounting bracket and part of optical sensor tachometer. |
| |
| |
ESCAP
|
R32 29 416
|
28D11219E4 DC Motor with gearbox
|
$289.00
|
|
|
28D11219E4 DC Motor 28mm dia x 65mm Mounted into R32 29 416 GearBox 32mm dia x 50mm. Large Gear on quarter inch shaft. One With nice mounting bracket and part of optical sensor tachometer, One Without Tach But Nice Collett front mount and Driver. |
| |
| |
BOWMAR-HAROWE
|
5-219
|
3-18VDC PM Motor 4-Pole with Optical TachOmeter
|
$25.00
|
|
|
3-18VDC Motors Perm Magnet 4-Pole - Opto tach - very high efficiency for daisy wheel printers - Open frame approx 2-3/4" long x
1.23" OD. The shaft is 1/2" long x 0.124" OD with two flush mount brackets on the bottom. |
| |
| |
CLIFTON
|
AS-718-013
|
3-24VDC MOTOR 4 POLE DC DUAL SHAFT (ONE END THREADED FOR 5/40)
|
$7.50
|
|
|
|
| |
| |
MABUCHI
|
RS360SA47
|
3VDC Heavy duty mini motors
|
$6.99
|
|
|
3VDC Heavy duty mini motors Starts turning under 1/2VDC 200MA Runs very strong torque at 3V 250ma +6V 330ma 1.08" / 27.4mm od. x 1.85" / 47mm Long including the 0.093" dia splinned shaft which is 0.3" long.. |
| |
| |
JOHNSON ELECTRIC ENGINEERING Ltd
|
HC615LG
|
6-18VDC Reversible PM Motor 18V 3500-RPM 0.1A No Load, 1753-RPM at 1.37A 11.5W 62m-Nm Torque
|
$5.95
|
|
|
18VDC 100mA 3500-RPM No Load ~ Torque Constant: 49.4 m-Nm/Amp Dy. Res: 6.84ohms ~ Motor Regulation: 28RPM/m-Nm Torque: 126m-Nm 2.63Amp at Stall ~ Maximum Efficiency: 68% Torque: 20m-Nm Speed: 2944RPM Current: 0.51Amp Output: 6.17Watts ~ Maximum Power: Torque: 62m-Nm Speed: 1753RPM Current 1.37A Output: 11.47W ~ Reversible ARM Permanent Magnet Motor ~ Shaft Length:11mm 0.435" Shaft Diameter: 3.1mm 0.125" Has Attached Pulley: 10mm 0.39"Inside Diameter x 4.6mm 0.18" Inside Length ~ Motor (with keeper ring): 38mm 1.495" Diameter x 83mm 3.27"Long Overall weighs 8-oz Rotation: Clockwise when viewed from shaft output end with positive applied to positive |
| |
| |
BUEHLER
|
13.65.36
|
6-24VDC 10KRPM 2-In-Oz PermMagnet w/ Tachometer
|
$17.97
|
|
|
6-24VDC HIGH Speed Motors Permanent Magnet with Tach Output Disc Drive Replacement 10,000 RPM MAX. 2-IN-OZ 1.38" Dia X 2.7" L with Pulley on shaft - also useful as Generator / wind speed indicator (anemometer) & science fair projects - NEW - Weigh about half a pound each |
| |
| |
BARBER COLEMAN
|
BYQM-33240-5
|
6VDC 50MA Motors (3-12V) Factory new bulk
|
$4.95
|
|
|
6VDC 50MA Motors (3-12V) Factory new bulk |
| |
| |
LEESON
|
C4T34DC1B
|
C4T34DC1B 3 Phase DC motor
|
$100.00
|
|
|
|
| |
| |
BREVEL
|
724-902718
|
DC Motor 12vdc 225ma
|
$5.95
|
|
|
DC Motor 12vdc 225ma about 1500RPM @ 12VDC 6/12/24VDC pretty good torque 724-902718 shaft size is 4.5mm diameter x 17mm long. |
| |
| |
HANSEN CORPORATION
|
KZA-MP0261
|
DC Permanent Magnet with brushes - Quiet
|
$48.95
|
|
|
Brush-type, 2V at 200mA 12V about 400mA 24V about 600mA - No Load. Very Quiet, low audible noise. 2.12" [54mm] dia x 4.25"[108mm] including geared shaft. die cast endbells and ball bearings No other info available. |
| |
| |
UNMARKED
|
30701
|
DUAL SHAFT - HI TORQUE 1-3VDC 1Amp
|
$1.49
|
|
|
1-3VDC MOTOR 27.5mmOD 15,500-RPM DUAL SHAFT 2.3mm 15mm-Long Reversable PM 27.5mm/1.08"-OD x 1.47" Long excluding shafts - RELATIVELY HIGH TORQUE approx 1 AMP |
| |
| |
ORIENTAL MOTORS
|
0GN30KA
|
GEAR HEAD 30:1 Small 42mm square
|
$59.00
|
|
|
1.65" [42mm square] for GN-type pinion shaft motors. Ball Bearing - GN gearhead Parallel Shaft (30:1) -
Parallel Shaft Gearhead for use with a wide variety of motors. |
| |
| |
BUEHLER
|
1.61.046.531.00
|
Lead-Screw GearHead Motor Assembly 6VDC
|
$38.99
|
|
|
Steel Bracket 9.4" x 6" with HeavyDuty 31mm dia BUEHLER motor with GearHead Assembly Forcefully driving a 110mm Long Lead Screw 9.5mm diameter. Max travel as assembled . . . Plastic Traveller with removeable steel bracket. Approximately 100 RPM at 6VDC - With optical tachometer, 3-wire cable & connector - No Spex. |
| |
| |
MICRO SWITCH
|
22VM81-020-5
|
MICRO SWITCH DC MOTOR & DC TACHOMETER
|
$25.00
|
|
|
MICRO SWITCH DC MOTOR & DC TACHOMETER
LOOKS TO BE IN GREAT CONDITION |
| |
| |
MABUCHI
|
FM13(2280) RTMC-125-19316
|
Mini Motors 1.5 - 3VDC 200ma
|
$1.00
|
|
|
1.5-3VDC Miniature Reversable Motors 6600-8800 RPM 15x20mm x 25mm long 230-710mADC 3-pole Permanent Magnet 2mm dia shaft SPEC=FA-130RA
typically used in razors tools instruments & toys
|
| |
| |
FAULHABER
|
2657W024CR 470
|
MiniMotor SA 24DC 38/1-134:1
|
$288.97
|
|
|
Pretty blue front half made in Switzerland, powerful read end motor made in Germany. 57mm diameter Flange 4-hole mount. Motor & Ger drive 145mm Long including 8mm flattened shaft 18mm long. |
| |
| |
FAULHABER
|
3557K024CS
|
Minimotor SA 38/1 66:1 w/ Encoder
|
$288.77
|
|
|
Precision Geared Motor - 4 holes 36mm apart on front flange mount 57mm dia. Minimotor including 8mm flattened shaft 15mm long is 150mm Overall. Includes HP HEDS-5500G14 |
| |
| |
GLOBE MOTORS
|
403A6008-3
|
Motor 24VDC
|
$19.95
|
|
|
24VDC Motor 1.56"OD x 2.6" long with 0.158" dia shaft 0.5" long -
PM Reversable 8" Long leads with connectors - RFE/Used |
| |
| |
MABUCHI
|
RS-85 SERIES
|
MOTOR 6VDC 1A REV MOTOR/GOLD HOUSING
|
$4.95
|
|
|
6VDC 2AMP 7600RPM REVERSABLE MOTOR GOLD HOUSING
DIAM:1.85"OD LENGTH: 2.75" SHAFT: 0.60" W/ WIRED LEADS |
| |
| |
MABUCHI
|
RE-14
|
Motors 1 - 3 VDC
|
$0.95
|
|
|
3VDC Mini Motors 0.82"OD - 0.24"OD-plastic worm gear 0.65"Long on 2mm dia shaft and approx 1/4" wire leads. RFE/Used |
| |
| |
MABUCHI
|
767075152
|
Motors 3VDC Mini Slot Car 2/$1.00
|
$0.50
|
|
|
3VDC Motors Mini Slot Car 0.72" x 0.39" x 0.75"
Min purchase per line item $1.00 = 2/$1.00 |
| |
| |
JOHNSON
|
1342284
|
MOTORS 9-15VDC Miniature IBM
|
$3.75
|
|
|
9-15VDC 750-2000 RPM miniature PM Reversable MOTOR Approx 100MA 18 x 23 x 51mm has 2mm-shaft 7.5mm-long and EMI filter - made for IBM 750RPM@9VDC about 1250RPM@12VDC ((More info: Box shape , Motor standing on flat surface with shaft up: 23.8mm wide x 18.5mm deep x 41.4mm tall with additional 2.0mm shaft base and 7.6mm shaft x 2.0mm diam)) |
| |
| |
ESCAP
|
PL-11-219-119 Series28
|
Pair of 3VDC PM Motors cassette drive
|
$29.00
|
|
|
3VDC TWO BEAUTIFUL MOTORS Draw only 50MA, in a data cassette Drive. Reversable Permanent magnet type. PRECISION MOTOR=ESCAP Series#28 PL-11-219-119 28mm OD. DATA CASSETTE DRIVE = MFE 250BA 10-IPS 8000-BPS 6"x5"x3" Assembly |
| |
| |
BARBER COLEMAN
|
EYQM-63264-15-2
|
Permanent Magnet 12VDC Motor & Tachometer - Reversable
|
$8.95
|
|
|
12VDC REVERSABLE Permanent-Magnet 8,400RPM (No Load) MOTOR & Tachometer Some made by Barber-Coleman - Works on 2V and above - 1.2"OD x 2.75"L with Magnetic Tachometer 5,500rpm under a light load 7.7mm brass gear with 8 teeth attached - Tc: 1.6 oz-in. Ts: 7 oz-in. Kt:1.94 oz-in/A Po 7.7W RT: 4.65 Rt:4.65-OHM - No info on the tachometer and That's ALL we know. Motors are marked S0878B MERKLE-KORFF INDUSTRIES |
| |
| |
ESCAP
|
26L 28 2161 49
|
PM DC Motor 1"OD NEW
|
$85.00
|
|
|
PRECISION escap PM DC MOTOR 1.0"OD 2+"LONG - NEW - Used in Gould/Brush Chart Recorders - new |
| |
| |
BUEHLER
|
507104 series
|
PM Motor Dual-Shaft Reversable 6-24VDC
|
$14.95
|
|
|
6 to 24VDC low current, relatively high torque. Reversable by switching polarity. 40mm diameter x 64mm long with round 4mm shaft 19mm long and flattened shaft 20mm long. Coming and Going! Two 16" long wires with connector.weighs 3/4Pound. |
| |
| |
ESCAP
|
26 c28 210 1
|
PM MOTOR LOW VOLT DC
|
$49.00
|
|
|
PM DC ESCAP MOTOR 1.0"OD PRECISION FOR GOULD/BRUSH CHART RECORDS C282101 |
| |
| |
JOHNSON
|
HC315XLG
|
PM MOTORS 6-24VDC Reversable
|
$12.95
|
|
|
Permanent Magnet - Reversable - MOTORS 6-24VDC MINIATURE MOTOR 0.09" SHAFT 0.60" LONG W/ REMOVABLE BRASS GEAR - 1.14"OD x 2.12" Long w/ bushing + 0.6" long shaft |
| |
| |
MINIMOTOR SA
|
8-334
|
PRECISION CASSETTE DRIVE ASSEMBLY - USED - Older but FOUR beautiful Swiss & German made motors in them: German 330/5055-150 22mm OD x 46mm. 330/507-150 22mm OD x 46mm including 2mm dia shaft. 330-509 22mm OD x 43mm. AND a 16mm GEARED Swiss Model 050/00
|
$39.95
|
|
|
|
| |
