|
Mfg. Name |
Mfg. Part# |
Product |
Unit Price |
Add To Cart |
| |
| |
American Aerospace Controls
|
913A30C
|
0-30Amp DC Current Sensor
|
$75.00
|
|
|
DC Current Sensor / Transducer 0-5VDC-Output
+28VDC 1% Excitation 3/8'Dia hole. Connection diagram included. |
| |
| |
Neilsen-Kuljian
|
5B025-4 Sentry 250
|
1-150Amp Current Sensors/Switch NEW (cont) 300A (6-sec) 900Amps for 1 second - 15-turn trimpot adjusts for 1-150 Amps. Switch up to 0.3 Amp @ up to 120V AC or DC
|
$35.95
|
|
|
|
| |
| |
OHIO SEMITRONICS
|
CT4080
|
1000Amp DC~5kHz CURRENT SENSOR
|
$75.00
|
|
|
Input: 0~1,000Amps DC~5kHz Output: 0 - 100mV @ 200mA 5-Pin MS connector
OHIO SEMITRONICS CT4080 CURRENT SENSOR - TRANSDUCER |
| |
| |
LEM SA
|
HA25NP/SP5
|
25AMP INPUT current sensor
|
$55.00
|
|
|
|
| |
| |
LEM SA
|
LA55P (LA55TPC)
|
50Amp AC/DC CURRENT SENSOR
|
$33.88
|
|
|
0-50Amps AC or DC Hall Effect CURRENT SENSOR FACTORY - NEW. Measuring range- 70 A Secondary signal-50 mA Supply Voltage:12-15 Bi Accuracy: 0.9% PCB-mounting 37mm x 25mm x 27mm above board. Closed loop Hall Effect Technology
|
| |
| |
LEM
|
PR30
|
Clamp-On Current Probe DC to 100kHz
|
$295.00
|
|
|
ClipOn Probe measures AC, DC and complex waveform Currents with a resolution of 1mA from 5mA to 30Amps from DC to 100kHz. Requires one 9V alkaline battery. Max current 20Amps RMS Output 100mV/Amp Cable with BNC output. by LEM HEME Ltd - UK Factory new each with manual. Beautiful parts... |
| |
| |
ALLEN BRADLEY - AB
|
R-A290
|
CURRENT RELAY, ADJUSTABLE 1-12Amps 120V60Hz
|
$89.00
|
|
|
ADJUSTABLE CURRENT RELAY Adjustable from 1.0 to 12 AC Amperes 120V 60Hz Maximum continuous current 18AmpsAC. Automatic Reset, Adjustable Differential, Adj Current, Adj Time Delay from s/d pots on device. USE DIRECTLY or with Current Transformer |
| |
| |
CLARE -ELECTROSEAL
|
SBB3A0135A
|
CURRENT SENSING SWITCH RFE 135A MAX RES 0.0002
|
$39.00
|
|
|
|
| |
| |
CLARE -ELECTROSEAL
|
SBB3A0020A
|
CURRENT SENSING SWITCH RFE 20AMPS MAX RES 0.0004
|
$39.00
|
|
|
|
| |
| |
CLARE -ELECTROSEAL
|
SBB3A0002A
|
CURRENT SENSING SWITCH RFE 2AMP MAX RES 0.06
|
$39.00
|
|
|
Current Sensing Switch Used/RFE 2Amp Max Res 0.06 |
| |
| |
CLARE -ELECTROSEAL
|
SBB3A0030A
|
CURRENT SENSING SWITCH RFE 30AMPS MAX RES 0.0004
|
$39.00
|
|
|
|
| |
| |
CLARE -ELECTROSEAL
|
B2138E511
|
CURRENT SENSING SWITCH RFE 34A MAX RES 0.004
|
$39.00
|
|
|
|
| |
| |
American Aerospace Controls
|
S326-50
|
CURRENT SENSOR
|
$65.00
|
|
|
|
| |
| |
SIEMENS
|
3UG3522-1AL20
|
Currrent Monitor 0.1-10Amp AC/DC 1-Ph Relay
|
$95.00
|
|
|
8A/250V 50/60Hz 1/3HP 1-Phase Monitoring Relay - Due to the ON-delay T2, current peaks (OVER function) or current drops (UNDER function), which may occur during closing, do not result in a change to the relay state, for example suppression of the starting current during motor acceleration. The delay time T1 prevents the relay from picking up and releasing - A green LED signalizes the applied supply voltage. A yellow LED indicates the relay status. Current monitoring without memory (NO MEMORY) (Fig. IIIa) When the value of the monitored alternating or direct current has reached the threshold set at the front panel, and the set delay time T1 has elapsed, the output relay releases. As soon as the current reaches the hysteresis value, the relay picks up again. Current monitoring with memory: (Fig. IIIb) When the set threshold value has been reached and the set delay time T1 has elapsed, the output relay releases and remains in this state, even when the measured current reaches the set hysteresis value again. A reset is performed by switching the supply voltage off and on. 23mm wide 78mm tall 104mm OAD - 4 controls on front panel, tiny little Überwachungsrelais. |
| |
| |
MICRO SWITCH
|
CSLF4HG
|
Linear Current Sensor 73AmpDC 4-20mA-Out
|
$144.88
|
|
|
DC / DC Enclosed Sensor with 4-20mA Output. 11-24VDC Supply@30mA Max Sensed Current 147A-peak Adjustable Operating Range New, w/ spex |
| |
| |
HONEYWELL/MICROSWITCH
|
CSLA1DE
|
LINEAR CURRENT SENSOR HOLDER ASSEMBLY
|
$55.00
|
|
|
|
| |
| |
LEM SA
|
HAX 500S
|
NEW 500AMP CURRENT SENDOR with two Trimpots, 4 output leads and a large 2.5inch wide slot for the heavy current conductor . . . NIB
|
$143.76
|
|
|
|
| |
| |
BENDER GmbH
|
RCMA470LY
|
Residual Current Monitor 30mA-3A 0-150Hz 230V
|
$588.95
|
|
|
Ground fault monitor for grounded AC/DC systems - Residual Current Monitor Software Version: D55 V2.0 Werk-Nr 0203020067 The RCMA470LY monitors for ground fault leakage current in grounded & high-resistance grounded single & three-phase AC, pulsed DC, and pure DC type systems (Type B). Features include two seperately adjustable setpoints from 30mA...3mA for the main alarm and 50% of the set value for the pre-alarm, LED meter display (0-100%), adjustable time delay from 0...1 s for the pre-alarm and 0...10sec for the main alarm, fault storage, 2 DPDT alarm relays which can be set for normally energized and normally de-energized operation. An external BENDER current transformer is required for operation. DIFFERENZSTROMUBERWACHUNGSGER The RCMA470LY has a lower starting setpoint range than the RCMA471LY, and uses smaller current transformers. No transformer included. |
| |
| |
LEM SA
|
HA10NP/SP5
|
small CURRENT SENSOR 10Amp-Input PC-mount PULLS
|
$28.00
|
|
|
small CURRENT SENSOR 10Amp-Input PC-mount MADE IN THE U.K.
HA10NP/SP5 Pulls |
| |
