Go to Our Web Site
		This is our product index page. Please use this keyword searching to narrow down the result.	Advanced Search

<%-- ************************************************************ HTML Content Started Here ************************************************************ --%> Category  : CYLINDERS Mfg. Name Mfg. Part# Product Unit Price Add To Cart   Festo DNC-40-50-PPV-A-KP 2 x 10.4"L 145psi Cylinder Contact Sales 2 x 10.4"L 10bar~145psi Cylinder   Festo DNG-40-820-PPV-A 2.25 x 39" LONG 145psi Cylinder Contact Sales 2.25 x 39" LONG 145psi Cylinder   Festo DNC-50-320-PPV-A-K3 2.5 X 18.5" 145psi Cylinder Contact Sales 2.5 X 18.5" 145psi Cylinder   Festo ADVU-40-10-A-P-A 2.5 x 3.5"L 0.8-10bar~145psi Cylinder Contact Sales 2.5 x 3.5"L 0.8-10bar~145psi Short-stroke Cylinder   PARKER 01.50 CJ3LLT13MC 9.500 2000-PSI Hydraulic Contact Sales   Festo DNC-63-160-PPV-A-KP 3 x 17"L 145psi Cylinder Contact Sales 3 x 17"L 10bar~145psi Cylinder   Festo DNC-63-320-PPV-A 3 x 21" 145psi Cylinder Contact Sales 3 x 21" 145psi Cylinder   Festo DNC-63-125-PPV-A-KP 3" x 15.5"L 145psi Cylinder Contact Sales 3" x 15.5"L 145psi Cylinder   Festo DNC-80-160-PPV-A-KP 3.6 X 22" 145psi Cylinder Contact Sales 3-5/8" square x 15" long body, fitted with floppy thread - See Photos 8.5" high x 22" overall.   Festo DNC-80-160-PPV-A-KP 3.75 x 18.5"L 145psi Cylinder Contact Sales 3.75 x 18.5"L 145psi Cylinder   Festo DNC-80-320-PPV-A-KP 3.75 x 25"L 145psi Cylinder Contact Sales 3.75 x 25"L 145psi Cylinder   Festo DNC-100-400-PP-V-A-K3 4.6" x 23.3"L 145psi Cylinder Contact Sales 4.6" x 23.3"L 145psi Cylinder   BIMBA D-7938-A-8 UF 8" Stroke SS CYLINDER $45.00 8inch Stroke SS CYLINDER 14inchLong Overall 1.5inchOD VACUUM ACTUATION   SUSPA INC D40-00094 CYLINDER - LINEAR ACTUATOR Contact Sales Movotec Lift Systems 18.25" Long, plus 17" of shaft (when removed) 0.983"[24.9mm] diameter   Festo DNC-40-320-PPV-A-KP CYLINDER 145PSI 21'' Long Double-acting Contact Sales CYLINDER 145PSI 21''+Long 2.1'' square - 0.635'' [16.1] Threaded Shaft - KP: clamping unit for holding the piston rod - Part no.: 163346 Standard cylinder As per ISO 15552, with profile cylinder barrel, for proximity sensing, with adjustable cushioning at both end positions - - Modern design and construction save up to 11% space compared to ordinary standard cylinders. - Double slots on 3 cylinder sides for position sensors - Double-acting - Series DNC standard cylinders comply with the following standards: ISO 15552, NF E 49 003.1 (France), UNI 10 290 (Italy) -   BIMBA SF D-7939-A-3 CYLINDER 3" STROKE 1.5" DIA. $40.00 SS CYLINDER 3" STROKE 1.5" DIA. STAINLESS STEEL 9"Long 3/4"THREADED VACUUM ACTUATION   BIMBA KB50 CYLINDER HARDWARE $5.00   BIMBA 021-RP NEW BIMBA cylinder $33.00 NEW cylinder One-Inch stroke threaded shaft 0.6" OD x 5.6" Long Max   BIMBA CFO-01245-ATJ NEW CYLINDER "FLAT-1" $69.00 FLAT-I 0.5" DIA SHAFT Whole enchalida is about 8" long x 2.4" wide x 3.2" high - still wrapped so we didn't try it out. NEW & Nice PRESSURISED CYLINDER   BIMBA D850 ROD CLEVIS KIT 9/16 BORE $5.00 CYLINDER HARDWARE 9/16" BORE ACCESSORIES   PARKER 01.50 CJ2HLTV14AC 5.000 SERIES 2H TIE ROD CYLINDERS Contact Sales 3000 PSI Hyd.   WELKER BEARING Co WPA-40-73 WELKER GOLD-LINE SHOT PIN 75mm Stroke Contact Sales "the mounting surface for the shotpin must be flat within 0.05mm (0.002") 80.6mm[3.176] square x 21"long - Cylinder: WCP-002 Bore: 63mm Stroke: 75mm - weighs 21 pretty pounds - General Info: (Rap or Rigid coupler) - Double rod, Extend stop or Retract stop available   ©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.