DC Fans

Fan, axial. 24VDC 0.10A. (12-30VDC 11-29CFM) 2.5 Watt, 11-29CFM. Fan : 2 Wire 62.2mm square x 26.0mm deep. 7 Plastic blade. Mounted on removable plastic frame (overall 4.674" long), with four holes underneath, 70.2mm (2.767") centers. Complete with finger guard. Weight: 5 oz. Note: Brushless electronic motor, polarity protected. There is a four pin connector on the fan (AMP 1-480702-0 with the red positive wire on position 1 and the blue negative wire on position 2 and an interlock jumper between positions 3 and 4). A mating connector is AMP 1-480702-1 with 350690-1 pin contacts. EBM Papst. Made in Germany.

Learn More

MATSUSHITA - Panaflo - FBH-09A24LB  Fan, axial. 24VDC 0.10A, DC Brushless.

Dimensions: 3.6" square x 1" deep.

4.5" mount diagonal - 4 hole.

7 plastic blades.

2 wire leads.

Double marked 7BO5D4-B.

Weight: 5 oz.

Learn More

Globe - D47-B10B-04W49-00 Fan, axial.

Power: 12VDC 0.44amp, 3.6 Watt

Air flow: 88 CFM.

Ball bearing.

Material: Plastic.

Dimensions: 1" x 4.7" square (120mm x 120mm x 26mm), 7 blades.

Weight: 6 oz (218.291g)

Used/Removed from equipment.

 

Learn More

NIDEC-TORIN - TA225DC - A31390-10 Fan, Axial.

Input Power: 12VDC 0.08A. 2 Wire/Pin.

Speed: 2600 RPM.

Air Flow:12 CFM.

Construction: 9 plastic blades metal frame.

Mounting: 2 hole 2.78" spacing.

Dimensions: 2.37" x 2.71" x 0.8".

Opening: 2.25".

Ball Bearings.

Weight: 3.6 oz.

Terminals Out Top, Solder or Small Quick Connect

Model A31390-10.

Made in Japan

Learn More

COMAIR ROTRON - ST12G6X - 031504 - Fan, Axial, Sprint DC.

12VDC 0.12Amp 1.4 watt,

Airflow: 33 CFM.

Sprint DC.

Plastic 5 blades.

PTC & Polarity Protected

Mount: Panel 4 holes with 2.82" centers.

Dimensions: 80mm Square x 32mm wide.

Note: Alt P/N: 031504.

UL, CSA Listed 

Condition: LN Used/Removed from equipment.

Mixed length on lead wires. Some slightly dusty/dirty.

Weight 7 oz.

Learn More

TRW GLOBE - 19A2689 Fan, Axial. Xerox 127P1668 

A Vaneaxial fan consisting of a disk-type wheel within a cylinder with a set of air guide vanes. It has a higher efficiency than any other type of axial-flow fans and more expensive to manufacture.

24VDC.

Vaneaxial.

Dimensions: Round 2.620" D x 2.577" deep.

Mounts in hole with instrument-style flange front, four holes 2.111" apart, 3" centers.

Four plastic blade.

Two wire, 5" long with a 2 position Molex connector.

Made in USA

Learn More

Fan, axial. 5-13VDC, 0.20Amp. Marked: "C.T.55 13 5VDC". 9 Blade. With a sealed Buehler box on a bracket, 2 leads for 5-13VDC and 4 leads going to the motor, 1.9" deep overall. Maybe replaced with 1.69.011.128. Dimensions: 62x22mm plus motor.

Learn More

Fan, DC. 12VDC 0.2Amp 2.4 watt. Thin, 7 blade. All plastic. Mount: 4 holes at 4" centers. Dimensions: 3.156" long x 3.162" high x 0.602" deep. Two (2) wire, short leads with a 2 position female connector. Note: Model 681DH. Gently used, dusty. Learn More

Fans, axial. 12VDC 0.21Amp, 3.7 watt. Flight II. Dimensions: 3-5/8" square x 1" deep (92 x 26mm), 7 plastic blade. Cross: 032885. Learn More

Thermalloy/Aavid - 2325B-TCM45S - Heatsink with 5V Cooling Fan

Cooling performance approaches recirculating liquid

Dimensions: 2.1[53.5mm] x 2"[51mm] x 0.8"[20mm] high mount with epoxy

5VDC Cooling Modules for Microprocessors

5VDC Fan plastic 9-Blades with a 2x 6-Inch leads.

Factory New.

Learn More

DC DENSITRON CORP. - DPF60B12L - DC Brushless Fan, 12VDC 0.1A

Voltage: 12VDC

Current: 0.1A (100mA)

Thick 10-Blade Plastic Fan,

2-Wire Pancake Fan.

Dimensions: 60mm Square x 15.8mm

New Old Stock

Made in Japan

Learn More