Fans

Delta Electronics - EFB1548XHG - 5L58 -48VDC 1.65A DC Brushless Tubeaxial Cooling Fan

Rectangular/Rounded 150mm x 172mm x 50mm, (5.9" x 5.7" X 2")

Operating voltage 48 VDC (24 to 60 VDC)

Operating speed 6000/6500 RPM 

Operating Temperature -10C to +70C

Bearing Type - Ball Bearing Permanently Lubricated

Material -- Housing Die Cast Aluminum, Impeller Thermoplastic, Air Flow at 0 in (mm) H2O 415 CFM (11.75 M3/min)

Noise Level 74.5 dBa

Solid State Brushless DC Motor

Polarity & Lock rotor Protected

Tachometer - Open Collector 28VMax. 2 Pulse/Rev. 

Tachometer Output 5Ma Max VCE 0.5V Max

Lead Wires: - UL 1007 AWG #24 OR Equivalent

Red Wire Positive (+) Black Wire Negative (-)

UL Certified, CSA, TUV or VDE, RoHs Compliant 

EFB Series fans are low air resistant fans featuring over 25mm thickness for a 3-blade design. This standard DC axial fan has a maintenance-free ball bearing system and plastic impeller and aluminum frame.

Slightly Used in Excellent condition.

Made in Thailand

EBM Papst Fan, Axial. 48VDC (36-56V), 5.9 watt 3100U/min (3100RPM). 110 CFM, 54 dBA, 49 PSIL dB, With speed sensor tach-out (3rd blue wire). Housing Material: Aluminum,  5 metal blades, 4" leads. Mount centers: 5-7/8". Dimensions: 4-11/16" x 1.5" deep. (119mm x 38mm) Weight  1.15Lbs. (.52kG) Hall Effect Leads. Used/Removed from equipment. UL, CSA, & VDE Approved. Made in Germany. 

Comair Rotron Sprite - Model SU2A1 - 028267 - Fan, Axial, 115VAC 50/60Hz, 0.19/0.15Amp.

Square compact axial fans have a square-shaped housing that can span a round cutout or fit into a square cutout for cooling equipment within an enclosure. These equipment-cooling fans require minimal space for installation and are typically installed where there's full access for mounting them against the interior of an enclosure. They have mounting holes at each corner for securing them to a wall or panel.

Status: Discontinued

Air Flow: 34 CFM

Static Pressure: 0.149 in H2O (37.1 Pa)

Mount: 4 Hole on 2-13/16" centers and (2) 12" wire leads.

Housing Material: Cast Aluminum.

Fan Blades: 7 Polybutylene Terephthalate.

Dimensions: 3-3/16" square x 1-1/2" deep.

Bearing Type: Sleeve Ball Bearings.

Motor Design: Shaded Pole

Motor Insulation: Class A

Noise: Quiet 40.3dBA

Speed: 3250 RPM

Dimensions 3.25" X 3.25" X 1.75 (80mm X 42mm).

Mounting Position: 

Color: Black

Weight: 1.15 lbs

Design Life: 62,000 Hours Continuous at 70 C

Thermal Protection: Impedance 

Additional Information: http://www.comairrotron.com/sites/default/files/files/COMAIR%20CATALOG.pdf

RoHS Complaint, UL Recognized 

Alternates: SU2B1, 028267, CR091, CR091SU2A1, Dayton 3LE75

New Old Stock - Proudly Made in USA

Protechnic Magic - MGT8024HB-O25 - IP68 Waterproof Fan

DC Brushless Fan, Axial with Lock Rotor Protection.

28VDC 0.16 Amp. 3 Wire

Dual Ball Bearing

3000 RPM +/- 10%

Airflow: 41.34 CFM

Noise: 33.2dB (A), Max. 36.2 dB(A)

Life Expectancy: 70,000 hrs at continuous 40C 

Mount: 4 hole with 4" centers and 18" wire leads of which 8" is Watertight.

Housing material: Plastic with 7 plastic blades.

Dimensions: 80X80X25mm

Ingress Protection Rating: IP68 

Operating Temp. -10 to 70C, Storage Temp. -40 to 70C

TOYO - TFDD8024RXA - Fan, Axial.

Supply Voltage: 24VDC

Supply Current:0.145 Amp.

DC Brushless, Ball Bearing.

Mount: 4 hole with 4" centers and (2) 10' wire leads.

Housing material: plastic with 7 plastic blades.

Dimensions: 3.17" Square x 0.91" (23.1mm) deep. (80 X 80 X 25 mm)

Note: Ball bearing.

Made in Japan

Comair Rotron - 028245 - MR283 115 VAC Tubeaxial Cooling Fan, Used Excellent Condition

172mm x 150mm x 51mm, (6.75" X 5.92" X 2.00")
Operating Voltage/Current: 115 50/60 HZ /270mA
Operating Temperature 14 - 158F (-10C to +70C)
Bearing Type - Ball Bearing Permanently Lubricated
Material -- Housing Die Cast Aluminum, Impeller Thermoplastic
Air Flow - 235 CFM
RPM - 3400 RPM
Noise Level 55.80 dBa
Thermally Protected
Power - 31 Watts
Weight 1.8 Lbs/0.84kG
Lifetime @ Temp. - 51000 Hrs @ 40C
Safety Standard EN60950
Termination - 2 wire
Approvals - CE, CUL, UL Certified, RoHs Compliant

Note: Slightly Used / Excellent Condition / LN

EG&G-ROTRON - SD24B1 - Fan, Axial.

Rotron DC fans feature outstanding airflow performance in high pressure systems and all include a permanent split capacitor motor. An extended ball bearing life ensures fault-free use for a significant period of time and ensures Rotron DC fans provide a flexible and dependable cooling solution.

24VDC 0.12Amp, 35CFM. 2 wire 12".

Metal housing, 7 plastic blades.

Mount: 4 hole 4" centers.

Dimensions: 80 x 80 x 38mm (3-1/4" square x 1-5/8" deep).

Ball bearing. DC Brushless.

Air Flow: 59m³/h (35CFM)

Noise Level: 47.6dB

Fan Speed: 3500rpm

Bearing Type: Ball

Polarity protected. Sprite.

Approvals: UL, CSA, TUV.

New Old Stock

Made in USA

Fan, axial. 115VAC 50Hz 135mA 12 watt / 60Hz 115mA 11 watt. 140mA 10 watt. Noise: 34dB. Impedance protected. Material: Metal. 5 Metal blade. Dimensions: 80mm sqaure x 38mm deep with two 12" wire leads. New. Note: Compact. Listed: VDE, CSA, UL, CE. EBM Papst.

48VDC FANS NEW 3-1/8"-SQ X 1-5/8" (79.8 mm x 41.88mm) 

Ball Bearing, 35.0 CFM, 47.6 bBa, 0.060A 2.9W #032003 Zinc Frame & Plastic blades.

CE, UL approved, ROHS3 Compliant