FINCO - SP-11F - Connector, Coaxial Barrel Splice Connector, Low Loss Shielded Solderless.
- Buy 5 for $4.98 each and save 9%
- Buy 10 for $3.98 each and save 28%
FINCO - SP-11F - Connector, Coaxial Barrel Splice Connector, Low Loss Shielded Solderless.
There are many types of coaxial cables, and just as many coaxial cable connectors. The type of coaxial connector is dictated by the matching device, system, or other interconnect the coaxial cable will be mated with. Certain cables, however, may be a better fit for certain connector types, based on size, shielding type, center conductor type, additional layers, and types of metals used.
Dimensions: 0.295" ID For Dielectric Insulator to Slides into body.
0.325" OD of Surfact that the Conducting Shield Folds Over
1-7/8" Long and has a Crimp Ferrule 0.538" OD (0.475" ID) at each end.
High Quality Component Part Constructed of Silver Plated Brass.
Note: Two Endcaps are threaded into Body
Genuine Vintage Finco - New Old Stock - Rare
Priced Each and discounted in quantities of 5, 10 or more.
Appllcations: Splicing Long Runs of Low Loss Coaxial Cables such as RG11, RG12, RG213, RG217. Review above component part dimensions to confirm suitability for your specific CoAxial Cable splicing needs before ordering. Applying Rubber Splicing Tape or Heat Shrink Tubing over the splice can provide a weatherproof connection.
SKU | 3035 |
---|---|
Condition | NOS - NEW OLD SURPLUS |
Part Number | SP-11F |
Alternative Part Number | 6-022 |
FINCO - SP-11F - Connector, Coaxial Barrel Splice Connector, Low Loss Shielded Solderless.
There are many types of coaxial cables, and just as many coaxial cable connectors. The type of coaxial connector is dictated by the matching device, system, or other interconnect the coaxial cable will be mated with. Certain cables, however, may be a better fit for certain connector types, based on size, shielding type, center conductor type, additional layers, and types of metals used.
Dimensions: 0.295" ID For Dielectric Insulator to Slides into body.
0.325" OD of Surfact that the Conducting Shield Folds Over
1-7/8" Long and has a Crimp Ferrule 0.538" OD (0.475" ID) at each end.
High Quality Component Part Constructed of Silver Plated Brass.
Note: Two Endcaps are threaded into Body
Genuine Vintage Finco - New Old Stock - Rare
Priced Each and discounted in quantities of 5, 10 or more.
Appllcations: Splicing Long Runs of Low Loss Coaxial Cables such as RG11, RG12, RG213, RG217. Review above component part dimensions to confirm suitability for your specific CoAxial Cable splicing needs before ordering. Applying Rubber Splicing Tape or Heat Shrink Tubing over the splice can provide a weatherproof connection.