Other Hardware
- UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Cushioned Loop Clamp, 3/4" ID.
UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Hardware, Cable Clamps.
Cushioned Loop Clamp, 3/4" to 11/64" ID.
Tongue Hole Type, Oil Resistant.
Distance from loop center to tongue end: 1.0".
Center to center distance between loop and mounting hole: 0.781".
Overall width: 0.500".
Material: Steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material Thickness: 0.032".
Military NSN 5340-00-050-2740.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
Price for One Clamp, Discounted for quantity purchases of 6 & 60.
Learn More - Cleveland Steel & Polymer - 056-6717B – Neoprene Rubber Gasket 0.125" x 4.45" RoundSpecial Price $1.98 Regular Price $2.95Cleveland Steel & Polymer - 056-6717B – Neoprene Rubber Gasket 0.125" x 4.45" Round (3.175mm X 113.03mm) Also called Chloroprene Rubber (CR) or polychloroprene.Ideal for applications that are exposed to gases and water ingress, providing excellent weathering and ozone resistance. As a synthetic rubber, neoprene rubber, vs rubber, is composed of chemical compounds, making it stronger and more durable than natural rubber. Due to its chemical makeup, neoprene sheeting is a common material used to create industrial neoprene parts. Used as a water seal and reinforced with nylon fabric to provide extra strength and prevent stretch. Black Neoprene Rubber Gasket 0.125" thick x 4.45" Round with convenient hole 1.78" (45.212mm) directly in the center. Temperature: -20 F to 170 F Continuous Tensile Strength: 1000 psi min Applications: Commonly called ring gaskets, use them with raised-surface pipe flanges; they fit the surface inside the bolt holes and do not interfere with the bolt connection. Note: We also have a nice black glass filled Nylon Ring P/N 056-5891B, same diameter with 1.7" ID hole, again, Right smack in the center, with 8 mounting holes - 0.425" thick in middle, slopes down to 0.07" thick at edge. Learn More
- Leviton - 13351 - Lampholders/Tombstones. Medium G13 Base T8/T10/T12 Bi-pin. LED/Fluorescent Package of 2.Special Price $1.98 Regular Price $3.00IN STOCK - MORE THAN 100 READY TO SHIP!
Leviton - 13351 - Lampholders/Tombstones.
This Leviton T8 or T12 low profile lamp holder is for use with fluorescent lamps having a medium bi-pin base.
Non-shunted Bi-pin Lamp Holders/Tombstones.
Low Profile, Slide-On, Snap-On, or Bolt-On Mount.
Quickwire 18AWG Solid or Str Tinned.
For T8 LED Replacement and all T8/T10/T12 Fluorescent lamps, 600V 660 watt.
Listed: UL/CSA.
UPC: 041175370918
Package of 2.
Learn More - Unidentified MFG - 8-002 - Hardware, Roller. Mounted on a SS bracket.IN STOCK - MORE THAN 100 READY TO SHIP!
Hardware, Roller.
Mounted on a stainless steel bracket with 2 holes 0.625" (15.8mm) centers.
Dimensions: Overall 1.240" (31.5mm) wide x 1.163" (29.5mm) high, including roller.
Applications: Mechanical Projects, Robotics,
Very nice.
Learn More - Polypro Lyle - BSR-1 - Parachute Buckle, Side Release 1 Inch Quick Snap PVC Buckles.IN STOCK - MORE THAN 100 READY TO SHIP!
Polypro Lyle - BSR-1 - Parachute Buckle, Side Release 1 Inch Quick Snap PVC Buckles.
REPLACE OLD BUCKLES: Suitable for any project using webbing or straps, these durable, plastic buckles are designed to offer fast and effortless, single handed adjustment, while their exceptional strength and smooth release action make it a great choice for any side-release application.
Hardware, belt hook 2-part, Male to Female
Material: Durable and Versatile PVC.
Matte Grey Finish
Size: Accepts 1" Wide Webbing
Strength: 277 pounds minimum
Dimensions: Overall Length Cliped together is 2.85", Width 1.30", Height 0.525"
Applications: Perfect for backpacks, survival bracelets, purses, tie-down straps, dog collars, belts, boats, bike racks, baby carriers, life jackets, waist or hammock straps and so much more, these quick snap, flat side, plastic buckles are a reliable and convenient choice for any serious crafter.
Note: Not load-bearing - Do not use for overhead lifting.
Priced for 1 Side Release and 1 Buckle
Learn More - Unidentified MFG - 6-211 - Casters. Plastic 1-5/8". Package of 4.$1.95Casters. Plastic 1-5/8", steel swivel base 1-1/2" square with 4 hole mount 1-5/8" centers. Gold-tone finish. Package of 4. Learn More
- Unidentified MFG - 6-334 - Heavy Steel Tethers 0.120" O.D.Special Price $1.50 Regular Price $2.00
Heavy Steel Tethers 0.120" O.D. 8ft 10" long.
Learn More - SDP/SI - A6R6-110012 - Hardware, Timing Belt.
SDP/SI - A6R6-110012 - Hardware, Timing Belt.
Resistance to dirt, grease, oil, and moisture. Polyurethane has excellent abrasion resistance, so these belts don’t create dust while they runIt has fiberglass tensile cords for strength, durability, and resistance to elongation, and it has a polyurethane tooth facing for quieter operation and resistance to wear.
Pitch: 0.0816" (40D.P.).
Number of Grooves/Teeth: 110.
Width: 1/8" (0.125") 3mm
Material: Polyurethane.
Tension Member: Fiberglass.
Pitch Length: 8.98" (228.092mm).
Single Sided.
Learn More - TE Connectivity AMP INC - 207719-1 - D-Sub Hardware Kit, Jackscrew SocketSpecial Price $1.98 Regular Price $2.50
TE Connectivity AMP INC - 207719-1 - D-Sub Hardware Kit
Status: Discontinued
Jackscrew Socket For AMPLIMITE Series HDE, HDF, HDP
CONN SCREWLOCK FEMALE 2 SETS/BAGD-SUB
ACCESSORIES KIT SCREW LOCK FEMALE
Length - Threaded Portion Below Head: 0.560" (14.22mm)
Length - Below Head: 0.560" (14.22mm)
Thread Size: 4-40 Socket, 4-40 Screw
Alternate: 571-207719-1, DigiKey A9007ND, 5207719-1
Learn More - ITT Cannon - M24308/26-1F - Military Spacer & Hardware Kit.$1.95Hardware. Kit. Military jackscrew spacer kit. Double marked 020418-0002 and M24018-2. Learn More
- ITT Cannon - DB51221-1 - Connector, slidelock kit. Connector type: D sub.IN STOCK - MORE THAN 1,000 READY TO SHIP!
ITT Cannon - DB51221-1 Connector, slidelock kit.
Connector type: D sub, thread size: imperial: #4-40 NC 2A.
Accessory type: sliding lock retainer assembly. D sub shell size: DB. External width: 1.852".
Leaded process compatible: no, peak reflow compatible (260 C): no.
RoHS compliant.
Learn More - 3M - 3341-1L - Connector, D-Sub. Jack Socket Screws Hardware Kit only.
3M - 3341-1L - Connector, D-Sub.
Jack Socket Screws Hardware Kit.
Jack Socket-Kit.
Material: Steel
Dimensions: Depth 4.8mm X Diameter 3.81mm X Length 12.7mm
Learn More - BERGQUIST - 3223-07AC-05 - SP400-0.007-00-05 - Thermally Conductive Heat Sink Insulator. For TO-3 & TO-66. Package of 4.
Package of 4 - BERGQUIST - 3223-07AC-05 Hardware, Heat Sink Insulator.
Thermally conductive insulation material, smooth and highly compliant surface characteristic with high thermal conductivity.
The Original Sil-Pad Material for TO-3 and TO-66 components.
Shape: Rhombus
SP400-0.007-AC-05
Sil-Pad 400 Insulator.
Dimensions: 1.650x1.140 Inch (41.91mm x 28.96mm)
Thickness: 0.007" (0.178mm)
Operating Temperature: -60 C to 180 C
Breakdown Voltage: 3.5 KVAC
Material: Silicone Rubber
Backing, Carrier, Fiberglass
Color: Gray
Thermal Resistivity: 1.13°C/W
Thermal Conductivity: 0.9W/m-K
Tensile Strength: 20 Mpa
Flammability Strength: UL 94 V-0
Shelf Life: N/A
Also Known as Bergquist Sil-Pad 400 Series, IDH 2167699
Alternate: Digi-Key BER203-ND, IDH 2167699
NSN 5999-01-363-0757
Price is for a strip of Four (4) Insulators.
Learn More - Unidentified MFG - 3-065 - Rolling Ball Tilt Switch, 4 Position Direction Sensor, 50mA. TO-39 Case, Gold Plated Leads and Contact Ball.IN STOCK - MORE THAN 5,000 READY TO SHIP!
Rolling Ball Tilt Switch. Direction indicating Switch, TO-39 style case. Gold plated leads, and internal contact ball Highly Sensitive to detect basic motion/orientation. Environmentally safe, non-mercury electronic switch. Sealed type available for heavy humidity environment, free from bad connection problem caused by contact oxidization. Poor man's accelerometer.
An internal gold-plated ball inside the sealed case touches one of 4 leads when tilted about 25-degrees or more. Since the leads are 90-deg apart you can sense which direction the device is leaning or tie the 4 together and any shaking or movement off level will cause contact closure. Has four leads on the bottom and one on top.
Rolling Ball Tilt sensors allow you to detect orientation or inclination. They are small, inexpensive, low-power and easy-to-use. If used properly, they will not wear out. Their simplicity makes them popular for projects, toys, gadgets and appliances.
Typical Applications - Alarms, Safety, Security, Directional Position, Vibration, Movement Detection.
Last picture shows dissected TO-39 case to show internal gold plated ball and four contact leads.
Significant discounts in Quantity purchases of 100, 300 or more.
Learn More - BW CONTROLLER CORPORATION - 6-258 - Hardware. Metal shield.$1.50Hardware. Metal shield. Material: steel. Dimensions: 5-7/16" square x 5/16" high OD, 5" square x 1/4" high ID, with 7" centers. Learn More
- BERGQUIST - 3223-07AC-03 - Insulator. For TO-3 & TO-66. Package of 4.$1.98 As low as $1.49
BERGQUIST - 3223-07AC-03 Hardware, Insulator.
For TO-3 and TO-66 components.
SP400-0.007-AC-03
7Mil, (0.178mm)
Sil-Pad 400 Insulator.
acrylic Polymer
Thermally conductive insulation material, smooth and highly compliant surface characteristic with high thermal conductivity.
Price is for strip of Four insulators.
Alternate: Newark 06WX5977
Learn More - Bivar Inc - ELM1-330 - Hardware, LED Mount . Package of 20.Special Price $1.98 Regular Price $2.50
Bivar Inc - ELM1-330 Hardware, LED.
Mounting hardware for T1-3/4 Led(s).
Self-retaining.
Material: PVC.
Mount: Vertical.
Size: 0.330" Length.
Color: Black.
Package of 20.
Learn More - TE Connectivity AMP Inc. – 605494-1 - 8-742 - AMP Inc. - 4-Piece, In-Line Fuse Holder Protects Fuse from Environment. Status: Discontinued – New Old Stock All In One Design Transparent Holder Overall Dimensions are 2" Long x 0.56" Diameter Fits all StandaTE Connectivity AMP Inc. – 605494-1 - 8-742 - AMP Inc. - 4-Piece, In-Line Fuse Holder Protects Fuse from Environment. Status: Discontinued – New Old Stock All In One Design Transparent Holder Overall Dimensions are 2" Long x 0.56" Diameter Fits all Standard 0.25" Diameter X 0.625" to 1.25" Long Glass/Ceramic Fuses (6.35mm D x 31.75mm) Kit consists of 1-Each 552861-1 & 552860-1 & Two-552859-1 Terminals 24-14 AWG Versatile, Cost Effective & Space Saving. Perfect Connection Every Time. No Tools Required. Rating: 0.5A - 20A 32VDC Wire Gauge: 24 to 14 AWG (0.2mm – 2mm) Material Heat Resistant Clear Thermoplastic Enclosure Screws Together - Vintage - New Old Stock Adjustable Screw Together Length Alternate: Also previously sold as GE Fuse Holder Applications: Home, Automotive, Marine, & Commercial - Perfect For Automotive / Mobile Audio Installations. Replaces and seals better: Littelfuse 01550020ZXA In-Line Fuseholder. Alternate: 01500079Z, 98F987, F1467-ND, 576-01500079Z, Bussman HEB Series. Note: Discounts provided for Lot Purchases of 2, 3, or 4 with “Make Offer” option limited to Bulk Purchases. Larger quantities available upon request. Learn More
- Unidentified MFG - BP03-02 - HEX NUTS 50/$2.25 BULKSpecial Price $1.69 Regular Price $2.25HEX NUTS 50/$2.25 PER BAG Learn More
- Unidentified MFG - BP02-05 - Screw. Flat head 2/56 x 7/16". Package of 50.Special Price $1.99 Regular Price $3.00Hardware, screw. Flat head 2/56 x 7/16". Package of 50. Learn More
- Unidentified MFG - BP02-04 - Hardware, screw. 2/56 x 1/2". Package of 50.Special Price $1.99 Regular Price $3.00Hardware, screw. 2/56 x 1/2". Package of 50. Learn More
- Unidentified MFG - BP28-05 - Hardware, screws. 2/64 x 5/8". Package of 50.$1.50Hardware, screws. Size: 2/64 X 5/8". Package of 50. Learn More
- Unidentified MFG - BP28-02 - Hardware, screws. 2/56 x 5/8". Package of 50.$1.50Hardware, screws. Philister HD 2/56 X 5/8". Package of 50. Learn More
- Unidentified MFG - BP26-04 - #6 LOCK WASHERS 50/$1.25 BULK$1.50#6 LOCK WASHERS 50/$1.50 PER BAG Learn More