Other Hardware

Filter  
  1. Price $1.80 - $3.00 Remove This Item
Clear All
VAC  
Common Size  
Color  
Manufacturer  
Unit of Measure  
Price  
View as List Grid

Items 1-24 of 188

Page
per page
Set Descending Direction
  1. UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Cushioned Loop Clamp, 3/4" ID.
    UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Cushioned Loop Clamp, 3/4" ID.
    Special Price $1.89 Regular Price $2.50 As low as $1.49

    UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Hardware, Cable Clamps.

    Cushioned Loop Clamp, 3/4" to 11/64" ID.

    Tongue Hole Type, Oil Resistant.

    Distance from loop center to tongue end: 1.0".

    Center to center distance between loop and mounting hole: 0.781".

    Overall width: 0.500".

    Material: Steel, carbon with synthetic rubber mil grade Mil-R-3065.

    Material Thickness: 0.032".

    Military NSN 5340-00-050-2740.

    More info: http://www.umpco.com/products_pdf/NASM21333.pdf 

    Price for One Clamp, Discounted for quantity purchases of 6 & 60. 

    Learn More
  2. Cleveland Steel & Polymer - 056-6717B – Neoprene Rubber Gasket 0.125" x 4.45" Round
    Cleveland Steel & Polymer - 056-6717B – Neoprene Rubber Gasket 0.125" x 4.45" Round
    Special Price $1.98 Regular Price $2.95
    Cleveland Steel & Polymer - 056-6717B – Neoprene Rubber Gasket 0.125" x 4.45" Round (3.175mm X 113.03mm) Also called Chloroprene Rubber (CR) or polychloroprene.Ideal for applications that are exposed to gases and water ingress, providing excellent weathering and ozone resistance. As a synthetic rubber, neoprene rubber, vs rubber, is composed of chemical compounds, making it stronger and more durable than natural rubber. Due to its chemical makeup, neoprene sheeting is a common material used to create industrial neoprene parts. Used as a water seal and reinforced with nylon fabric to provide extra strength and prevent stretch. Black Neoprene Rubber Gasket 0.125" thick x 4.45" Round with convenient hole 1.78" (45.212mm) directly in the center. Temperature: -20 F to 170 F Continuous Tensile Strength: 1000 psi min Applications: Commonly called ring gaskets, use them with raised-surface pipe flanges; they fit the surface inside the bolt holes and do not interfere with the bolt connection. Note: We also have a nice black glass filled Nylon Ring P/N 056-5891B, same diameter with 1.7" ID hole, again, Right smack in the center, with 8 mounting holes - 0.425" thick in middle, slopes down to 0.07" thick at edge. Learn More
  3. Unidentified MFG - PT-590 - Wire Nuts and Fastener Mounting Kit.
    Unidentified MFG - PT-590 - Wire Nuts and Fastener Mounting Kit.
    Special Price $2.98 Regular Price $4.50 As low as $1.98
    IN STOCK - MORE THAN 1,000 READY TO SHIP!

    Hardware. Wire Nut Set and Fastener Mounting Kit.

    Each kit includes - Minimum 3 wire nuts plus 8 #6 Sheet Metal Screws 5/8" long and 8 Tinnerman Speed/Spring Nuts.

    Applications: Mounting Speakers, or similar replaceable items.

    Proudly Made in USA

    Learn More
  4. Unidentified MFG - 8-436 - Steel Lanyard Tethers, Vinyl Coated. 36" Length.
    Unidentified MFG - 8-436 - Steel Lanyard Tethers, Vinyl Coated. 36" Length.
    Special Price $2.98 Regular Price $3.50 As low as $1.98

    Steel Lanyard Tethers, Vinyl Coated.

    Tethers, also called lanyards, are simple metal or composite cables with loops at each end. They can be attached to any object for added security and are frequently used in the commercial and agricultural industry to provide attachment between a pin and its mating part to minimize lost hardware.

    Overall 35-3/8" Length Hole-to-Hole

    Mounting Loop and Swivel Hangar

    Tough.

    With Clear Jacket 0.063" / 1.5mm OD. (1/16")

    Applications: GoPro Camera Lanyard. Secure cables and adapters in boardrooms, workstations and other areas to help prevent against costly theft or accidental loss.

    Learn More
  5. Leviton - 13351 - Lampholders/Tombstones. Medium G13 Base T8/T10/T12 Bi-pin. LED/Fluorescent  Package of 2.
    Leviton - 13351 - Lampholders/Tombstones. Medium G13 Base T8/T10/T12 Bi-pin. LED/Fluorescent Package of 2.
    Special Price $1.98 Regular Price $3.00
    IN STOCK - MORE THAN 100 READY TO SHIP!

    Leviton - 13351 - Lampholders/Tombstones.

    This Leviton T8 or T12 low profile lamp holder is for use with fluorescent lamps having a medium bi-pin base.

    Non-shunted Bi-pin Lamp Holders/Tombstones.

    Low Profile, Slide-On, Snap-On, or Bolt-On Mount. 

    Quickwire 18AWG Solid or Str Tinned.

    For T8 LED Replacement and all T8/T10/T12 Fluorescent lamps, 600V 660 watt.

    Listed: UL/CSA.

    UPC: 041175370918

    Package of 2.

    Learn More
  6. EECO - 4-063 - Hardware, Adjustable Leveler Leg / Mount. 6/32 x 5/8". Package of 10.
    EECO - 4-063 - Hardware, Adjustable Leveler Leg / Mount. 6/32 x 5/8". Package of 10.
    Special Price $2.98 Regular Price $4.50 As low as $1.98

    EECO - 4-063 Hardware, Screw. Adjustable Leveler Leg / Mount / Dress Screw.

    May be used as a Leveling Foot.

    Material: Decroative Aluminum.

    Dimensions: 3/4" Diameter

    Recessed Head, 6/32 Thread X Stem Length 5/8" Long (Plate Fastener).

    Applications: Instrumentation, 

    Package of 10.

    Learn More
  7. Akryl - 056-5891B - Nylon Flange 4.45" Round
    Akryl - 056-5891B - Nylon Flange 4.45" Round
    $2.45
    Black glass-filled Nylon Flange Ring 4.45" Round with 1.7"ID hole Right smack in the center, with 8 mounting holes - 0.425" thick in middle, slopes down to 0.07" thick at edge. We also have available the matching rubber gasket for $2.45 also, P/N 056-6717B. Learn More
  8. LFC - LFCPIN-1IN-1/4IN - 1/4 X 1 Inch Clevis Pin, Steel Heat Treated Pin with Zinc -Yellow Chromate Plated Finish. Package of 10.
    LFC - LFCPIN-1IN-1/4IN - 1/4 X 1 Inch Clevis Pin, Steel Heat Treated Pin with Zinc -Yellow Chromate Plated Finish. Package of 10.
    Special Price $2.98 Regular Price $3.50 As low as $2.49

    LFC - LFCPIN-1IN-1/4IN - 1/4 X 1 Inch Clevis Pin, Steel Heat TreatedPin with Zinc -Yellow Chromate Plated Finish. 

    1/4" (0.250) Diameter, 13/16" Usable Length, 1.00" Overall Length

    Max Cotter Pin 1/16”

    Package of 10.

    Learn More
  9. Unidentified MFG - PT-417 - Hardware, Feet or Bumper. Compression Stem Push-in Rubber Feet. Package of 24.
    Unidentified MFG - PT-417 - Hardware, Feet or Bumper. Compression Stem Push-in Rubber Feet. Package of 24.
    Special Price $2.49 Regular Price $3.50
    READY TO SHIP - ONLY 76 LEFT IN STOCK!

    Hardware, feet. Compression Stem Push-in Rubber Feet.

    The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These foot/bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

    Shape: Round 

    Diameter: 0.500", Overall Height: 0.340, Foot Height; 0.165" 

    Fits: 1/4" Hole 

    Also can serve as a bumper or idiot plug for 0.250" hole.

    Material: Rubber.

    Operating Temperature: -20 to 180 F

    Reduces vibration, isolates and prevents movement.

    Applications: Ideal for electronics cabinets, test equipment, enclosures, or projects.  

    Package of 24.

    Learn More
  10. Unidentified MFG - PT-241 - HARDWARE PACKET
    Unidentified MFG - PT-241 - HARDWARE PACKET
    $3.00
    HARDWARE PACKET with 8 pcs 1 1/2 inch. long #8 philip head screws & 8pcs. #8a speed nut. Learn More
  11. Unidentified MFG - MS-276 - Wire holders. PCB, snap-in. Package of 50.
    Unidentified MFG - MS-276 - Wire holders. PCB, snap-in. Package of 50.
    Special Price $3.00 Regular Price $3.50
    Hardware. Wire holders. Material: plastic, white. Mount: PCB, snap-in. Dimensions: 0.612" long x 0.220" wide x approximately 0.835" above board. Note: Snap clip. Package of 50. Learn More
  12. Unidentified MFG - 8-002 - Hardware, Roller. Mounted on a SS bracket.
    Unidentified MFG - 8-002 - Hardware, Roller. Mounted on a SS bracket.
    Special Price $1.98 Regular Price $2.50 As low as $0.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    Hardware, Roller.

    Mounted on a stainless steel bracket with 2 holes 0.625" (15.8mm) centers.

    Dimensions: Overall 1.240" (31.5mm) wide x 1.163" (29.5mm) high, including roller.

    Applications: Mechanical Projects, Robotics, 

    Very nice.

    Learn More
  13. Unidentified MFG - 8-648 - Hardware, Ceiling Light and/or Fan Pull String. Package of 10.
    Unidentified MFG - 8-648 - Hardware, Ceiling Light and/or Fan Pull String. Package of 10.
    Special Price $2.98 Regular Price $5.00 As low as $1.98

    Hardware. Pull String for Ceiling Lights and/or Ceiling Fans.

    Length: 34" Braided String

    Chain Connect on One End, Bell Style Brass Pull on Other.

    Alternate: Midwest Fastener 64633, SATCO 90/1034, Jandorf 60313

    Vintage - New Old Stock

    Package of 10.

    Learn More
  14. Unidentified MFG - 8-634 - Hardware, brush. Nylon. Package of 25.
    Unidentified MFG - 8-634 - Hardware, brush. Nylon. Package of 25.
    $3.00
    Hardware, brush. Nylon. Body: approximately 1.5" long, plus black bristles 5/8" long. Disposable. For gluing, painting or other projects. Package of 25. Learn More
  15. Attractive  Speed Control Wall Plate, Aluminum, Fan, Blower, Commercial.
    Attractive Speed Control Wall Plate, Aluminum, Fan, Blower, Commercial.
    Special Price $2.49 Regular Price $4.95
    Attractive Wall Plate. For Speed Control. Cover Exposed Wires, Material: Aluminum. Mount: 2 Holes with 3-5/16" Centers. Dimensions: 4" x 2" Wide. Applications: Fan Speed Control, Fireplace Blowers, Industrial. Learn More
  16. Polypro Lyle  - BSR-1 - Parachute Buckle, Side Release 1 Inch Quick Snap PVC Buckles.
    Polypro Lyle - BSR-1 - Parachute Buckle, Side Release 1 Inch Quick Snap PVC Buckles.
    Special Price $1.98 Regular Price $2.75 As low as $1.29
    IN STOCK - MORE THAN 100 READY TO SHIP!

    Polypro Lyle - BSR-1 - Parachute Buckle, Side Release 1 Inch Quick Snap PVC Buckles.

    REPLACE OLD BUCKLES: Suitable for any project using webbing or straps, these durable, plastic buckles are designed to offer fast and effortless, single handed adjustment, while their exceptional strength and smooth release action make it a great choice for any side-release application. 

    Hardware, belt hook 2-part, Male to Female 

    Material: Durable and Versatile PVC.

    Matte Grey Finish

    Size: Accepts 1" Wide Webbing

    Strength: 277 pounds minimum

    Dimensions: Overall Length Cliped together is 2.85", Width 1.30", Height 0.525"

    Applications: Perfect for backpacks, survival bracelets, purses, tie-down straps, dog collars, belts, boats, bike racks, baby carriers, life jackets, waist or hammock straps and so much more, these quick snap, flat side, plastic buckles are a reliable and convenient choice for any serious crafter. 

    Note: Not load-bearing - Do not use for overhead lifting.

    Priced for 1 Side Release and 1 Buckle 

    Learn More
  17. Unidentified MFG - 6-211 - Casters. Plastic 1-5/8". Package of 4.
    Unidentified MFG - 6-211 - Casters. Plastic 1-5/8". Package of 4.
    $1.95
    Casters. Plastic 1-5/8", steel swivel base 1-1/2" square with 4 hole mount 1-5/8" centers. Gold-tone finish. Package of 4. Learn More
  18. SOUTHCO - 97-67-103-15 - Over-Center Series Replacement Latch Keeper.
    SOUTHCO - 97-67-103-15 - Over-Center Series Replacement Latch Keeper.
    Special Price $2.98 Regular Price $6.00 As low as $2.49

    SOUTHCO - 97-67-103-15 - Over-Center Series Replacement Latch

    Southco Fixed Grip Draw Latches.

    Over-center Draw Latch Large Size Concealed Keeper (two hole mount) Steel Powder Coat

    Access Restriction: Pad Lockable. 

    Keeper Type: Concealed.

    Keeper (Two Hole Mount).

    Material: Steel, Black Powder Coated

    Size Series: Large Size. 60 Series

    Note: Latch Keeper Only- Does not include Latch Assembly (keeper only).

     

    Learn More
  19. SDP/SI - A6R6-110012 - Hardware, Timing Belt.
    SDP/SI - A6R6-110012 - Hardware, Timing Belt.
    Special Price $1.98 Regular Price $2.95 As low as $1.49

    SDP/SI - A6R6-110012 - Hardware, Timing Belt.

    Resistance to dirt, grease, oil, and moisture. Polyurethane has excellent abrasion resistance, so these belts don’t create dust while they runIt has fiberglass tensile cords for strength, durability, and resistance to elongation, and it has a polyurethane tooth facing for quieter operation and resistance to wear.

    Pitch: 0.0816" (40D.P.).

    Number of Grooves/Teeth: 110.

    Width: 1/8" (0.125") 3mm

    Material: Polyurethane.

    Tension Member: Fiberglass.

    Pitch Length: 8.98" (228.092mm).

    Single Sided.

    Learn More
  20. PANDUIT - FCP13-M20 - Cable Ties Accessories - Black
    PANDUIT - FCP13-M20 - Cable Ties Accessories - Black
    $3.00
    Cable Ties Accessories - Black 84mm long x 9.4mm x 5mm"Use with Panduit base FCB13 or RAFCB13" Learn More
  21. LORD MANUF. - 150PH14-18 -  J-2049 - Hardware, Rubber Vanti-Vibration Isolator Cup Shock Mount.
    LORD MANUF. - 150PH14-18 - J-2049 - Hardware, Rubber Vanti-Vibration Isolator Cup Shock Mount.
    Special Price $2.98 Regular Price $5.95

    LORD MANUF. - 150PH14-18 - J-2049 - Hardware, Rubber Anti-Vibration Isolator Cup Shock Mount, Platform Mount.

    LORD Plateform Mounts provide effective isolation against vibration. The contour of the fl exing element was developed to provide uniform stress distribution.

    Hardware, Shock Mount, Cup Style

    Mount Resilient Wea

    With Steel Housing, 2-5/8" (Mount).

    Old Stock

    Alternate: 5342-00-959-0679

    Learn More
  22. HILTI - 00306636 - Hardware. CLH Series 3/4" Copper Swivel Ring Hangers, Clevis Loop Hanger.
    HILTI - 00306636 - Hardware. CLH Series 3/4" Copper Swivel Ring Hangers, Clevis Loop Hanger.
    Special Price $2.98 Regular Price $3.50 As low as $2.49
    READY TO SHIP - ONLY 85 LEFT IN STOCK!

    HILTI - 00306636 - Hardware. CLH Series 3/4" Copper Swivel Ring Hangers, Clevis Loop Hanger.

    Sprinkler Pipe Hanger

    Hilti CLH Series 3/4" Copper plated hangers.

    Recommended for suspension of non-insulated stationary copper tube.
    • Pre-assembled insert nut on hanger
    • Can be installed with one hand: pipe and pipe ring don't have to be swivelled around when screwing onto the threaded rod 3/8"-16 
    • No special nut required
    • System approved / listed by VdS, FM and UL

    Difficult to find in Copper plated with Hilti quality

    Learn More
View as List Grid

Items 1-24 of 188

Page
per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.