Knobs

DAKA-WARE - Davis Molding - DAK-P1105-27 - 1914-AS - Hardware, Instrument Knob.

For 1/8" (6.35 mm) shaft, with set screw.

Eight Knurled/Raised/ Ribbed Edges for ease of gripping.

Material: Compression Molded Phenolic Knobs

Black with Silver/Brushed Aluminum Tone Face and pointer.

Dimensions: 0.745"OD x 0.487" high. (21-30 mm)

New Old Stock

Made in Chicago USA

Lot of 2

Learn More

Hardware, knobs. Slide pot knobs. Color: white. Dimensions: 9.8mm wide (0.387") x 5.5mm (0.219") deep x 11.1mm (0.438") high. Red and Black are available also. Note: I actually thick these knobs are better suited for P/B switch banks. They will fit a shaft 3.6mm x 2.4mm, but will sit parallel to slide pot. Package of 10. Learn More

Control & Instrument Switch Pointer Knob.

For 1/4" mount with 2 set screws.

Molded-in metal insert tapped for for added strength.

Bakelite Construction with Decorative Cap and Directional Pointer. 

Knurled Grip.

Approximate Overall Dimensions: 0.736" High X 0.731 Wide" X 1.206 Long (Pointer) (18.8 X 18.6 X 30.6 mm) 

Applications: Instrumentation, Test Equipment, Amplifiers, Stereos, Radios, and Switches

Vintage - Never Used - New Old Stock - Military Quality.

Proudly Made in USA

Learn More

345-0500 Hardware, Equipment Instrumetation Control Knobs.

Silver on Black, 20mm ("0.80") Diameter, 13.45mm Tall (0.53").

Silver Cap and White Indicating Pointer.

Ribbed Skirted Edges for Solid Gripping.

Ready for 1/4" (6.4 mm) Potentimeter or Switch Control having a Flattened Shaft ("D-Shaped"). 

Push-On, no set screw but has a metal insert for added strength

Potentiometer Knob.

Material:  Phenolic / Bakelite

Black w/White Line.

Vintage  - New Old Stock.

Learn More

Hardware, knobs. For potentiometers/trimpots, flat style. Color: white. Package of 10. Note: Perfect fit for our P/N: MS-022, SKU 5942 pot, not included. Learn More

Hardware, Knob. For snap-on 1/4" half flattened or "D Shaped" Shaft.

No set screw.

Material: Plastic, black.

With indent Finger Touch Control.

Dimensions: 1-1/4" Diameter x 5/8" High.

Vintage - New Old Stock

Learn More

ROGAN BROTHERS  Hardware, knob. Guitar Amplifier, Radio

For 1/4" Flattened Shaft.

Dimensions: 1.267" Diameter x 0.57" High (32.18mm X 1.45mm)

With Top Molded Pointer.

Color: Black.

Material: Bakelite

Vintage - New Old Stock

Made in Skokie Ill USA

Learn More

Hardware, knob. Snap-on. Dimensions: 0.5" square x 0.214" high. Color: beige. Package of 25. Learn More

Hardware, Knob/CAP/Button.

For pushbutton switches with a square shaft 0.189".

Dimensions: 1/2" square x 0.396" high.

Color: Black.

Package of 10.

Learn More

Hardware, Knob/Cap/COver. For Slide Switches.

Overall Exterior Dimenasions: 0.615" Length X 0.298" Width X 0.385" Height

Top Swith Portion Dimensions: 0.325" Lenght X 0.200" Width X 0.150" Height

Shaft Size: 0.200" Length x 0.125" Width X 0.135" Depth, Stepped where Deeper Rectagular slot is 0.150" X 0.078".

Material: Thermoplastic.

Color: Black.

Shape: Retangular

Package of 8.

Learn More

Hardware, knob. For 0.185" D shaft. Spring-clip. Marked: Increase / Set Point. Dimensions: 1-1/8" D x 0.525" high. Color: gray. Package of 5. Learn More

Hardware, Equipment Knob For 1/4" shaft.

Knurled edge.

Black with silver.

Rugget Heavy Duty.

Dimensions: 1.756" (44.5mm) D x 0.825" (20.9mm) high.

Has 2 set screws.

Note: Equipment Knobs.

Discounted: Front face have some blemishes.

Learn More

Hardware, knob. Knurled equipment knob. Dimensions: 1-5/8" D with 1/4 x 20 x 1/2" long threaded stud. Color: Black. Learn More

Hardware, knob. For 1/4" flattened shaft. With red indicating line. Dimensions: 0.50"OD x 0.45" tall. Color: white. Package of 5. Learn More

Hardware, knobs. Slide pot knobs. Color: red. Dimensions: 11.9mm wide (0.471") x 5.5mm (0.223") deep x 10.9mm (0.431") high. Red and White are available also. Note: I actually think these knobs are better suited for P/B switch banks. They will fit a shaft 3.6mm x 2.4mm, but will sit parallel to slide pot. Package of 10. Learn More

Hardware, D Shaped Splined Shaft Knob Extension.

Potentiometer shaft extension provides Electrical Isolation

For: 1/4" Splined or Slotted shaft, to compress and fit.

Just under 1/4" ID, opposite end will fit a Diameter 1/4" Shaft.

Depth of Shaft Insert: 0.54" Maximum

Material: Nylon.

Color: Natural

Dimensions: 0.250" D x  3.275" long. (Extends reach approximately 3")

Vintage - New Old Stock - Rare Difficult item to find

Great for potentiometers, switches, volume controls and/or restoration of vintage equipment.

Learn More

285652-2  - Hardware, Plastic Control Knob.

For 1/4" Diameter Shaft with Metal Insert and Two Set Screws.

Knurled Vertical Texture in the Outside

Beige with Directional Indicator.

Dimensions: 11/16" Diameter x 3/4" High.

Note: With Top Light beige Tab.

Applications: Test Equipment, Instrumentation

Learn More

Calrad - 85-567 Hardware, Knob.

Skirted Instrument Knob, Chrome.

Calibrated 0-9

Scale 0-9. Fluted Ebony Grip with Aluminum Insert for 1/4" Shaft with Set Screw.

Dimensions: Diameter 1 3/16" Overall 1.167" D x 0.668" high.

New, Individually Packaged.

Learn More