Pulley

Hardware. Timing belt pulley. COG pulley. Dimensions: 23.8mm D x 14.5mm with an additional shaft of 6.3mm. Overall 20.66mm high, shaft ID 6.2mm. (401-0097-01). Requires 8/32 set screw.

Learn More

Timing belt pulleys. Dimensions: Outer ID 23.8mm D x 14.2mm high. Inner belt area is 17.3mm D x 10.9mm high max. will fit a 7.68mm (0.302") shaft. New. Note: Unit is missing one needed set screw. Learn More

SDP/SI - A6R6-110012 - Hardware, Timing Belt.

Resistance to dirt, grease, oil, and moisture. Polyurethane has excellent abrasion resistance, so these belts don’t create dust while they runIt has fiberglass tensile cords for strength, durability, and resistance to elongation, and it has a polyurethane tooth facing for quieter operation and resistance to wear.

Pitch: 0.0816" (40D.P.).

Number of Grooves/Teeth: 110.

Width: 1/8" (0.125") 3mm

Material: Polyurethane.

Tension Member: Fiberglass.

Pitch Length: 8.98" (228.092mm).

Single Sided.

Learn More

PT-084 Hardware, Timing Pulley. COG.

Smooth transmission, with buffering and vibration reduction capabilities, and low noise.

Easy maintenance, no need for lubrication, low maintenance cost.

Material: Nylon White.

Press-Fit, Two Flange Design

Dimensions: Overall 0.518" (13.1mm) Diameter x 0.305" (7.7mm) wide

Shaft: 0.191" (4.8mm) Diameter (ID of pulley).

Will support timing belt 0.214" (5.4mm) maximim width.

Note: Cogged.

Applications: Light Duty Forward & Reverse movement

New Old Stock

Learn More

Hardware, timing belt/pulley. COG-Gear 14XL. Learn More