Spacers
- Fastener Tool & Supply – 069-3322 – 34WWSP - Extra Thick 430 Stainless Steel Fender Washer 2" OD, 0.343” ID. Package 20.IN STOCK - MORE THAN 100 READY TO SHIP!Lot of 20 - 069-3322 – 34WWSP - Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Package of 20 • Fender washers offer a bolt or screw a wider bearing surface that will disperse the load weight to a greater surface area and ensure that the nut or bolt is pressed up against a smooth surface reducing the chances the fastener loosening over time because of contact with an uneven surface as well as keeping a fastener from pulling through a hole that is larger than the diameter of the head. • A fender washer though similar in shape to a standard washer the outside diameter is much larger in proportion to the center hole. • Made of stainless steel offers a high level of chemical and corrosion resistance and strength that will outperform and outlast zinc plated fasteners for years without the need to perform costly and time consuming maintenance. • The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties. • These Fender Washers are made of Grade 430 Stainless Steel which is Magnetic (Does not contain Nickel) and will outlast washers made of steel or zinc for years to come. Made in USA Learn More
- Unidentified MFG - SPACE5 - Hardware, Spacer / Standoffs. 15mm x 6mm D. Package of 25.Special Price $2.98 Regular Price $3.50READY TO SHIP - ONLY 39 LEFT IN STOCK!
Hardware, Spacer / Standoffs.
Material: Nylon.
Dimensions: 6.6mm OD x 15.00mm long, with and ID of 4.9mm.
Package of 25.
Learn More - Philips - ECG413 - Standardized Replacement Part.$1.58Standardized Replacement Part. Package of 1. Note: Cross NTE413. Last of the stock. Learn More
- CENTURY FASTENERS CORP - NAS43DD3-128FC - Hardware, spacer. Non-threaded.Special Price $1.98 Regular Price $2.95READY TO SHIP - ONLY 13 LEFT IN STOCK!
CENTURY FASTENERS CORP - NAS43DD3-128FC
Hardware, spacer sleeve.
Non-threaded.
Material: lightweight aluminum alloy.
Surface treatment: Chromate.
Dimensions: 7.9mm OD, 5.4mm ID x 50.8mm (2.003") long.
Wall thickness: 1.2mm.
Note: Military 5365-01-353-9594.
P/N NAS43DD3-128FC Specifications
Learn More
Overall Length: 1.9950 Inches Minimum And 2.0050 Inches Maximum
Body Outside Diameter: 0.3020 Inches Minimum And 0.3220 Inches Maximum
Body Inside Diameter: 0.1940 Inches Minimum And 0.2340 Inches Maximum
Corner Shape: Square All Corners
Material: Aluminum Alloy 2024 Overall
Surface Treatment: Chromate Overall
Surface Treatment Document And Classification: Mil-c-5541,cl 1a Mil Spec Single Treatment Response Overall
Style Designator: 17c Solid, Plain, No Outside FlangesV - BIVAR - LTM-230 - LED Holder. For T1, T1-3/4.
BIVAR - LTM-230 Hardware, LED Holder.
For T1, T1-3/4 Leds.
Vertical.
Material: Crystalline Polymer.
Dimensions: 5.08mm Diameter, 5.842,mm Length
Color: Black.
Learn More - Unidentified MFG - TO-220 Spacer - Hardware, spacer. For TO-220 components.$0.10Hardware, spacer. For TO-220 components. Material: PVC. Size: 0.375" high. Learn More
- Essentra Richco Plastics Co. - PS-8-01 - Hardware, spacer. Push. Board mount.
Essentra Richco Plastics Co - PS-8-01 Hardware, Spacer.
Push. Size: 1/2".
Material: Nylon.
Board Mount, resting.
For hole: 0.187" (3/16") (4.75mm).
Color: Natural.
Learn More - RAF Components - 1159-10-N - 159-10-N-0 - Hardware, Spacer / Standoffs. Round 5/16", Nylon. Package of 10.READY TO SHIP - ONLY 19 LEFT IN STOCK!
RAF Components - 1159-10-N - Hardware, Spacer.
Shape: Round
Gender: Female
Dimensions: 5/16" x 1/2" x 0.192" ID.
Material: Nylon 5/1.
Alternates: 310810RSN, 13SP118, 1159-10-N-0, SP118, NY-6342-10-0.500-00, 2990N194
Package of 10.
- Manufacturer UnIdentified - 8054 - Hardware, Spacer. Threaded 6-32, Nylon 0.25" D. Package of 50.
8054 Hardware, Nylon Spacer.
Nylon round spacers are nonmagnetic and nonconductive, making them ideal for use in electronics applications. Lightweight and corrosion resistant, they are often used instead of metal fasteners in light-duty furniture applications.
Gender Female
6-32 Threaded.
Material: Nylon 6/6.
Color: Natural
Dimensions: 0.250" D x 0.700" long. Just over 11/16" Length
Package of 50.
Alternates: 145-15TSP009-ND, STR-8, 4032, 3ZMD3 (0.750=Length)
Learn More - Unidentified MFG - SPNY-128-9 - P00825 - Hardware, Round Spacer / Bushing/ Standoff. 0.688" Long, 0.30 OD, 0.142"ID, Package of 20.
SPNY-128-9 - P00825 - Hardware, Round Unthreaded Spacer/ Bushing / Standoff.
Designed for use with bolts and screws, this nylon spacer is both lightweight and non-magnetic. Used for adjusting the space between two objects while providing vibration and corrosion resistance.
Material: Nylon, Natural.
Non-threaded.
Operating Temperature: -40 C to 1850 C.
Dimensions: 0.688" long x 0.30" OD, with an ID of 0.142".
Inside Diameter fits #6 Screw
Manufactured to ANSI Standards ans Specifications.
Applications: Nylon Spacers are used to insulate against moisture and electricity, and are often used as glides, bushings, bearings and rollers. They have good insulation and cushioning properties, and are an economical and attractive finishing touch to many applications and assemblies.
Alternates / Similar: Bivar 906-690, Mouser 749-906-690
Package of 20.
Learn More - Unidentified MFG - SPACE3 - Hardware, spacer. 0.25" x 0.44". Package of 25.$3.00Hardware, spacer. Quarter inch OD round. With fit a #4 screw. Material: aluminum. Dimensions: 0.25" OD x 0.440" long. Non-threaded ID. Package of 25. Learn More
- Unidentified MFG - SPACE4 - Hardware, spacer. Hex F-to-F.$4.95Hardware, spacer. Hex F-to-F. Thread size: 10/32. Material: steel. Dimension: 16mm D x 76.3 (3") long. Learn More
- Unidentified MFG - CTI 43635 - 4/40 SS Threaded Hex Spacers/Stand-OffsSpecial Price $0.49 Regular Price $0.65
- Unidentified MFG - BP26-07 - Connector, spacer. Package of 10.Special Price $1.99 Regular Price $3.00Connector, spacer. 8/32" external thread, 6/32" internal thread. Brown plastic body. Overall 0.5" (12.7mm) high w/o external threads. Package of 10. Learn More
- Unidentified MFG - BP07-01 - Hardware, spacer. Nylon. Package of 100.$3.00Hardware, spacer. For components, leds and more. Material: Nylon. Dimensions:6.1mm OD x 4.8mm ID x 6.2mm high, with 0.5mm wall. Package of 100. Learn More
- Unidentified MFG - 068-408 - 1/4" Hex M-F 0.75"L Aluminum + 3/16"stud$0.39Hardware, spacers. 1/4" OD x 0.75" long hexagonal male-female aluminum + 3/16" 4/40 stud. Learn More
- SPC TECHNOLOGY - BP28-07 - Hardware, spacers. 1/4"H nylon. Package of 25.$1.00Hardware, spacers. For PC boards, 1/4" high. Material: plastic/nylon. Package of 25. Learn More
- Keystone Electronics - 887 -Hardware, Spacer. #6 Non-Threaded Nylon 0.25" D. Package of 50.
Keystone Electronics - 887 Hardware, Spacer.
Gender Female
#6 Non-Threaded.
Material: Nylon 6/6.
Color: Natural
Dimensions: 0.250" D x 0.628" long. ID is 0.140" wall thickness is 0.055".
Package of 50.
Learn More - Keystone Electronics - 1903D - Spacer. Hex 1/4" x 3/4"L. Package of 10.Special Price $4.98 Regular Price $7.00READY TO SHIP - ONLY 86 LEFT IN STOCK!
Keystone Electronics - 1903D Hardware, spacer.
Hexagonal 1/4" x 3/4" long, 6/32 thread.
Material: Nylon 6/6 UL94V-2.
Color: Natural/light beige.
Package of 10.
Learn More - Keystone Electronics - 1451E - 1/4" Hex x 3/4"L 6/32 Brass$0.451/4" Hex x 3/4"L 6/32 Brass with grey Zinc plate Learn More
- HH SMITH/ABBATRON - 8672 - Hardware, Phenolic /Standoff, Threaded 4/40. Package of 100.
HH SMITH/ABBATRON - 8672 - Hardware, Phenolic Spacer/Standoff.
Phenolic resins are found in myriad industrial products. Paper phenolics are used in manufacturing electrical components such as electrical insulators, spacer, standoffs, etc..
Phenolic spacers are made from paper-base, resin-impregnated, heat-cured materials.
High torque should not be applied to these spacers.
Insulating spacer of choice when higher temperatures are encountered than can be withstood by nylon, or where greater strength without cold-flow is required.
Threaded 4/40.
Resin Impregnated, Heat Cured Materials with 130C Max. Temperature Rating.
Dimensions: 1/4" OD x 1/2" Long.
Alternates: 8158, 8159
Package of 100.
Learn More - Herman Smith Inc - 4179 - Spacer. Hex 0.187" D x 0.5" long. Package of 25.$3.00Hardware, spacer. Hex 0.187" D x 0.5" long. Thru hole for self tap#4 screw. Material: plastic, gray. Package of 25. Learn More
- Globe Electronics - N-2014-440 - 3/16" Nylon 4/40 Hex Spacer x 1"Long$0.15
Globe Electronics - N-2014-440 - 3/16" Nylon Threaded
Quality Electronic Hardware Since 1976
4/40 Hex Spacer x 1" Long
Made in USA
Learn More - Globe Electronics - N-2002-440 - 1/4" Hex Nylon Spacer 4/40 x 1/4"Long$0.101/4" Hex Nylon Spacer 4/40 x 1/4"Long Learn More