Spacers

SPC Tech, Amerlok - MPCS-4 - Snap-in Circuit Board Spacers 1/4" Stand-offs.

Circuit Board Support Stand-Off / Locking Circuit Board Supports.

Snap-in Locking.

Material: Nylon 6/6.

Color: Natural.

Dimensions: 1/4" (6.4mm) Board Spacing/Panel Separation with top 0.156" and bottom 0.187".

RoHS Compliant

Alternates: LCBS-4-01, TRLCBS-4-01, DTRLCBS-4-1

 

Learn More

Wearnes Cambion - 350-1300-10-07-00 - Hardware, Spacer / Stand-off. Body: 0.25" (6.35mm) Round X 0.188” (4.78mm) Height Shank: 0.138” (3,51mm) Round OD X 0.94” (2.39mm) Long For Board Thickness: 0.062” (1.59mm) Swage Anvil: A Uses Anvil Swage Tooling 435-6410-01-00-00 Through Hole. Material: Brass .02 Nickel. Finish: Cadmium Plus Chromate Coated. 4/40 UNC-2B Threaded. Package of 100. Made in England Learn More

CBO - Hardware, Insulator/Stand-Offs. Heavy Duty.

Material: Brass and Ceramic.

Base mount: Oval with 2-1/4" centers (1-5/8" x 2-7/8").

Dimensions: 4" Tall.

Porcelain Insulator: 1.25" Diameter

Brass Support: 1.625" Diameter

Weight: 1.1 lb.

Applications: High Power Transmitters 

Alternate/Similar: Lapp 14760 & 24114

Proudly Made in USA

Learn More

HH SMITH/ABBATRON - 8672 - Hardware, Phenolic Spacer/Standoff.

Phenolic resins are found in myriad industrial products. Paper phenolics are used in manufacturing electrical components such as electrical insulators, spacer, standoffs, etc..

Phenolic spacers are made from paper-base, resin-impregnated, heat-cured materials.

High torque should not be applied to these spacers.

Insulating spacer of choice when higher temperatures are encountered than can be withstood by nylon, or where greater strength without cold-flow is required.

Threaded 4/40.

Resin Impregnated, Heat Cured Materials with 130C Max. Temperature Rating.

Dimensions: 1/4" OD x 1/2" Long.

Alternates: 8158, 8159

Package of 100.

Learn More

Lot of 20 - 069-3322 – 34WWSP - Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Hardware, Extra Thick Fender Washers 430 Stainless Steel. For 5/16" Bolts. A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Extra Thick Fend Washer 0.120” Thick Dimensions: 2" OD x 0.343” (11/32) ID Material: 430 Stainless Steel Package of 20 • Fender washers offer a bolt or screw a wider bearing surface that will disperse the load weight to a greater surface area and ensure that the nut or bolt is pressed up against a smooth surface reducing the chances the fastener loosening over time because of contact with an uneven surface as well as keeping a fastener from pulling through a hole that is larger than the diameter of the head. • A fender washer though similar in shape to a standard washer the outside diameter is much larger in proportion to the center hole. • Made of stainless steel offers a high level of chemical and corrosion resistance and strength that will outperform and outlast zinc plated fasteners for years without the need to perform costly and time consuming maintenance. • The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties. • These Fender Washers are made of Grade 430 Stainless Steel which is Magnetic (Does not contain Nickel) and will outlast washers made of steel or zinc for years to come. Made in USA Learn More