Hardware
Electronic Hardware Components & Parts
Electronic Surplus carries a broad variety of surplus hardware components and parts. We have electronic knobs, gears, bearings, enclosures, spacers, and much more. Our electronic hardware for sale comes from top-grade manufactures like 3AM and ABB Control.
Some of our electronic hardware for sale comes in the manufacturer’s original packaging, while others are slightly used. We’re proud to say that when you order a used electronic hardware component from Electronic Surplus, you don’t have to worry about quality. Our team of experts checks each and every used item before we put it up for sale.
Shop our surplus hardware components below. Is the part you need out of stock? Request it here.
- Thermalloy/Aavid - 507222B00000 - Hardware, Heatsink. Dual TO-220.IN STOCK - MORE THAN 500 READY TO SHIP!
Thermalloy/Aavid - 507222B00000 - Hardware, heatsink.
For two TO-220 Components.
Dewscription: 12 Fin.
Material: Black Anodized Aluminum.
Dimensions: 1.47 x 1.75" x 0.38" tall (37.4mmL x 44.5mmW x 9.7mm).
Vertical or horizontal Mount.
Thermal Resistance: 9.6 C / W.
Power dissipation 8W @ 70 Degree C.
Rohs Compliant.
More info: www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=507222b00000g
Rohs Compliant
Cross Reference: 6072B, Digi-Key HS114-ND
- Unidentified MFG - 8-162 - Knobs for 5.9mm Splined Shaft.
Hardware, Knob. Knurled with Splined ID for 0.236" Shaft.
Dimensions: 4/40 Set Screw Included.
Overall at base 0.843" OD wide and 0.694 OD at top x 0.689 tall.
Base: ID is 0.662".
For a ribbed/slotted shaft: 0.234" (5.9mm).
Material: Plastic.
Color: Silver Chrome Plated.
Learn More - Unidentified MFG - 5-324 - Hardware, Slip-On Mounting Feet. Package of 10.
Hardware, Slip -On Mounting Feet.
PROTECT HARD SURFACES - QUITE AND ANTI-SLIP
Rubber Tear Drop Feet for 3/16" Shaft.
Color: Black.
Dimensions: 3/8" wide x 1/2" high.
Package of 10.
Learn More - Unidentified MFG - TF-020215 - Enclosure. Project box, without lid.$1.49 As low as $0.98
TF-020215 Enclosure. Project box, without lid.
Dimensions: 1.85" long x 1.83" wide x 1.46" high.
Mounting ears each side.
Color: Black. No lids.
Learn More - Unidentified MFG - 8-870 - Cable clamps. 1-7/8".
Cable Clamps. 1 7/8" Vinyl Coated Steel Clamp.
Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.
Diameter: 1 7/8".
Material: Vinyl Over Steel.
Mount: one hole slot.
Learn More - Unidentified MFG - 46156-01 - Hardware, Knob. Package of 4.READY TO SHIP - ONLY 99 LEFT IN STOCK!
Hardware, Dial Knob.
Shaft Diameter 1/4".
Shaft not Flush with Knob.
Dimensions: 7/8" wide x 1/2" high.
Color: Black.
Package of 4 pot knobs.
Learn More - Unidentified MFG - 6-334 - Heavy Steel Tethers 0.120" O.D.Special Price $1.50 Regular Price $2.00
Heavy Steel Tethers 0.120" O.D. 8ft 10" long.
Learn More - UMPCO - MS2191WDG11 - Hardware, Cable Clamp. Cushioned 11/16" D.$1.29 As low as $0.79
UMPCO - MS2191WDG11 Hardware, Cable Clamp.
Cushioned 11/16" D.
Mounting Hole: 0.204".
Material: Aluminum/Neoprene.
Material thickness: 0.050".
Metal width: 1/2".
Learn More - Southco - 84-29-101-10 - Coupler, Lock Nut Fractional Turn Fastener, 3-pc 0.25'' x 0.20''
Southco - 84-29-101-10 - Coupler.
1/4 Turn
Knurled Type Head
Lock Nut Fractional Turn Fastener
1-set contins 3-pieces
2-Plastic 1-Rubber
0.3'' long x 0.4" D x Expandable 0.20" ID.
Alternate: SOU84-29-101-10
RoHS Compliant
Learn More - JENSEN - 8-069 - Hardware, enclosure. Project box 4-1/4" x 4" x 1".$1.35Hardware, enclosure. Project box with foldable fake 900MHz antenna. Dimensions: 4-1/4" x 4" x 1". Screws on bottom to open. Learn More
- Challenger - 2830 - 80654-0 - Electrical Outlet Blank Wall Cover Plates, Brown Single Gang. Package of 3.
Challenger - 2830 - 80654-0 - Electrical Outlet Blank Wall Cover Plates.
Blank covers are used to provide a cover for bases when no light fixture is to be installed.
Heavy Duty Polycarbonate Thermoplastic Single Gang Cover.
Color: Brown Smooth Surface.
Alternates: Hubbell NPJ13, Pass & Seymour TP13CC15, Eaton PJ13B-F-LW, PJ13B-SP-L, Leviton 85014, ACE Brown 31208.
UL Listed
Package of 3.
Learn More - Unidentified MFG - 8-805 - Hardware, knob. For 1/4", half flat shaft w/pointer.READY TO SHIP - ONLY 17 LEFT IN STOCK!
Hardware, knob.
For 1/4", Half Flattened Shaft w/Pointer.
Material: Plastic.
Color: Brown.
Dimensions: 0.940" D x 0.478" High.
Vintage - New Old Stock
Learn More - Thermalloy/Aavid - 501200B00000 - 501200B00000G - Hardware, Heatsink. For 14 or 16 Pin DIP$1.25 As low as $0.69READY TO SHIP - ONLY 90 LEFT IN STOCK!
Thermalloy/Aavid - 501200B00000 - 501200B00000G - Hardware, Heatsink. For 14 or 16 Pin DIP
Epoxy Glue on Attachment
Black Anodized Extruded Heat Sink w/ Straight Fins for use with DIP 14 or 16
Thermal Resistance: 68.00 (Thermal resistance value is based on a 75°C rise in natural convection)
Dimensions: 0.730 L X 0.250 W X 0.190 high (187.57 X 6.35 X 4.83mm)
Alternate/Cross: 6012B
VIS#001128
New Old Stock
Learn More - Thermalloy/Aavid - 529802B02500 - Heatsink. For one TO-220 component.Special Price $1.49 Regular Price $2.00Out of stock
Thermalloy/Aavid - 529802B02500 Heatsink.
Extruded 5290 is a series of dual radial board level heat sinks designed to cool TO‐218, TO‐220, and TO‐247 devices.
Status: Discontinued
For one TO-220 type component.
Material: Aluminum, Black Anodized.
Mount: bolt on or PCB vertical with pins.
Dimensions: 41.91mm x 25.40mm x 38.1mm (1.5") high.
Power Dissipation @ Temperature Rise10W @ 50C.
Thermal Resistance @ Forced Air Flow 3.0C/W @ 200 LFM.
Thermal Resistance @ Natural 3.7C/W.
Learn More - ITT Cannon - 18220-8 - Connector, circular. Bushing, 2-1/2".Special Price $1.49 Regular Price $2.00
ITT Cannon - 18220-8 - Connector, Circular.
Rubber bushing specifically designed for MS3057A type cable clamp. Can also be used as a reducing bushing.
For use with MS3057 Connectors.
Bushing only, 2.46" (62.4mm) long, with an 0.426" (10.8mm) ID and 1.6mm thick.
Material: Rubber.
Color: Green.
Alternate: MS3420
Learn More - !@ - 9-062 - SNAP HOOKSSpecial Price $1.49 Regular Price $3.00READY TO SHIP - ONLY 25 LEFT IN STOCK!
3/4" SNAP HOOKS (made in west germany)
Learn More - TE CONNECTIVITY RAYCHEM - SAS-300-1-1030-0 - Thermofit Adhesive Sleeve, Meltable For Heat Shrink Tubing, Heat Shrinkable.
TE CONNECTIVITY RAYCHEM - SAS-300-1-1030-0 - Thermofit Adhesive Sleeve, Meltable For Heat Shrink Tubing.
Raychem heat shrink tubing is available in different varieties of materials, colors and sizes. Each is designed to provide long term protection in the most demanding environments where moisture, corrosion, mechanical damage and extreme temperature are found.
Seal, Protect, and Strain-Relieve with Heat-Shrinkable Molded Parts in a Range of Shapes and Materials to Help Withstand Harsh Environments.
Molding temperature is 140°C (285°F).
Slit Adhesive Sleeve
Primary Product Color : Black
Primary Product Material : Polyolefin
Extruded ID: 0.300" +/-0.005" (7.60mm)
Cut Length: 1.000" +/- 0.050"
Extruded Wall 0.060 +/- 0.003"
Alternates: CB5727-000, RPN 6984850001, 6984850001-SI
- Unidentified MFG - 8-377 - Control / Instrument Knob. For 1/4" Half Flattened Shaft.
Unidentified MFG - 8-377 - Control /Instrument Knob.
For 1/4" half flattened shaft.
Tappered and knurled Grip.
Material: ABS, black with Silver top and Directional Indicator.
Dimensions: 0.556" D at top, 0.753" D at base x 0.685" high.
Learn More - Unidentified MFG - 8-233 - Hardware, enclosure. No lid, 4.9" x 2.98".$1.50Hardware, enclosure. No lid. Dimensions: 4.97" long x 2.975" wide x 1.80" high. ID: 4.750" long x 2.742" wide x 1-11/16" deep. Material: plastic. Color: green. Learn More
- Unidentified MFG - 5-504 - Storage Case Enclosure, Flexible White PVC hinged case, 4 x 7-1/4" X 3/4". Package of 2.IN STOCK - MORE THAN 100 READY TO SHIP!
Storage Case Enclosure or Box.
Material: Flexible White PVC (Polyvinyl Choride)
Hinged Case Snaps Closed.
Sturdy, Well Made Case.
Dimensions: 4" wide x 7 1/4" long x 3/4" thick.
Package of 2.
Learn More - Unidentified MFG - 5-303 - Hardware, springs. Size: 0.35 OD x 9-1/4" long.$1.50Hardware, springs. Size: 0.35 OD x 9-1/4" long. Steel wire: 0.061" OD. Learn More
- Aavid -THERMALLOY - 4870 - Hardware Mounting Kit. DO-5.Out of stock
Aavid -THERMALLOY - 4870 DO-5 Hardware Mounting Kit.
Pre-packaged in heat-sealed plastic bags for use on assembly line.
Standard kit contains Thermalfilm insulator.
Other insulator materials available include: hard anodized aluminum and aluminum oxide.
Kit Includes:
Qty 2, Mica Insulator
Qty 1, PTFE Bushing
Qty 1, Flat Washer #1/4
Qty 1, No. 1/4-32 UNF-2B, Hex Nut
Qty 1, Terminal, Locking.
Rohs compliant.
NSN: 5340-01-247-5897
- MIDWEST SERVICE - 9-085 - Enclosure. Project box.$1.49 As low as $0.79
MIDWEST SERVICE - 9-085 Enclosure.
Project box.
Material: plastic, black and reads, "The Force".
Dimensions: 2-13/16" long x 2-1/4" wide x 1' High. Plus 2 mount feet with 3-1/3" centers.
Has four small holes on top/in front.
The top fits directly on the base, and is snug.
Learn More - International Components Inc - PGME-13RB - Hardware, Strain Relief.Special Price $1.49 Regular Price $1.95Out of stock
International Components Inc - PGME-13RB - Hardware, Straight Strain Relief Fitting.
Time Saving Installation: Simply push the cable through the strain relief fitting - tighten dome - done!
Dome Fitting, Black
Thread Type: PG13.5 European Straight
Liquid Tight, New.
Made in USA
RoHS Compliant
Alternate: Sealcon 59-3011
Applications: Appliances