Hardware
Electronic Hardware Components & Parts
Electronic Surplus carries a broad variety of surplus hardware components and parts. We have electronic knobs, gears, bearings, enclosures, spacers, and much more. Our electronic hardware for sale comes from top-grade manufactures like 3AM and ABB Control.
Some of our electronic hardware for sale comes in the manufacturer’s original packaging, while others are slightly used. We’re proud to say that when you order a used electronic hardware component from Electronic Surplus, you don’t have to worry about quality. Our team of experts checks each and every used item before we put it up for sale.
Shop our surplus hardware components below. Is the part you need out of stock? Request it here.
- Unidentified MFG - 202-297 - Hardware, Heatsink, For TO-220. Package of 10.IN STOCK - MORE THAN 500 READY TO SHIP!
202-297 - Hardware, Heatsink For TO-220 Components, Package of 10.
10 Fin.
Material: Aluminum, Black Anodized.
Vertical Mount.
Fin Style: Radial
Thermal Resistance: 7.5°C/W
Fin Style, Extruded Radial
Dimensions: 1.18" x 1"wide x 0.5" high.
Pre-drilled for devise with one 0.15" / 3.8mm hole, bottom is flat, no tabs or nubs.
Package of 10.
Alternate: HSS-B20-NPS-01, Aavid Thermalloy 507302B00000G, 01M6666
Learn More - GOULD - 00457313 - Hardware, knob. Package of 10.IN STOCK - MORE THAN 500 READY TO SHIP!
GOULD - 00457313 - Hardware, Knob/Cap.
For pushbutton switches.
Rectangular cap/knob.
Material: PVC, gray.
Dimensions: 7.0 x 2.5mm in front, 8.6x4.0mm flange at back.
ID is approximately 5.1 x 1.5mm.
Package of 10
Learn More - Custom - 8-482 - Hardware, knobs. White. Package of 10.$3.00Hardware, knobs. Slide pot knobs. Color: white. Dimensions: 9.8mm wide (0.387") x 5.5mm (0.219") deep x 11.1mm (0.438") high. Red and Black are available also. Note: I actually thick these knobs are better suited for P/B switch banks. They will fit a shaft 3.6mm x 2.4mm, but will sit parallel to slide pot. Package of 10. Learn More
- CUSTOM PLASTIC INJECTION - MS-231 - Enclosure. 4.6 x 2.4 x 1". Package of 2.Hardware, enclosure. Material: plastic. Dimensions: 2.4" wide x 1" deep x 4.6" high. Has one slot 1.9" x 0.1" in one end, and one mounting tab with 0.2" hole. Color: black. Complete with lid. Package of 2. Learn More
- Unidentified MFG - N00104-89-M-HB69 - 22mmOD 16mm-ID Steel BearingSpecial Price $2.96 Regular Price $3.95
N00104-89-M-HB69 Roller Bearing
Bushings 0.876" , 22.2mm OD x 0.63", 16mm ID x 0.62", 15.7mm
LongInd pkg'd and Greased.
Learn More - Unidentified MFG - PT-590 - Wire Nuts and Fastener Mounting Kit.IN STOCK - MORE THAN 1,000 READY TO SHIP!
Hardware. Wire Nut Set and Fastener Mounting Kit.
Each kit includes - Minimum 3 wire nuts plus 8 #6 Sheet Metal Screws 5/8" long and 8 Tinnerman Speed/Spring Nuts.
Applications: Mounting Speakers, or similar replaceable items.
Proudly Made in USA
Learn More - Unidentified MFG - 8-103 - Hardware, Snap In Stand Offs / Spacers / Pillars. For PC Boards. Package of 25.Special Price $2.98 Regular Price $4.00IN STOCK - MORE THAN 100 READY TO SHIP!
Hardware, Snap In Stand Offs / Spacers / Pillars.
For Printed Circuit Boards.
Snap-in. Extra Durable
Material: Nylon Plastic, Brown.
Size: Approximately 3/4" tall x 1-3/8" overall.
Package of 25.
Learn More - Unidentified MFG - 8-873 - Cable clamps. 1" adjustable. Package of 10.$2.99Hardware, cable clamps. Adjustable 1". Material: rubber over steel. Mount: 1/4" slot. Package of 10. Learn More
- Unidentified MFG - 8-858 - Cable clamps. 1/4". Package of 20.$2.99Out of stock
Cable Clamps. 1/4" Vinyl Coated Steel Clamp.
Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.
Diameter: 1/4".
Material: Vinyl Over Steel.
Package of 10.
With 0.40" slot mounting.
Package of 20.
Learn More - Unidentified MFG - 8-436 - Steel Lanyard Tethers, Vinyl Coated. 36" Length.
Steel Lanyard Tethers, Vinyl Coated.
Tethers, also called lanyards, are simple metal or composite cables with loops at each end. They can be attached to any object for added security and are frequently used in the commercial and agricultural industry to provide attachment between a pin and its mating part to minimize lost hardware.
Overall 35-3/8" Length Hole-to-Hole
Mounting Loop and Swivel Hangar
Tough.
With Clear Jacket 0.063" / 1.5mm OD. (1/16")
Applications: GoPro Camera Lanyard. Secure cables and adapters in boardrooms, workstations and other areas to help prevent against costly theft or accidental loss.
Learn More - Unidentified MFG - 4-060 - Hardware. Timing belt pulley. COG pulley.$3.00
Hardware. Timing belt pulley. COG pulley. Dimensions: 23.8mm D x 14.5mm with an additional shaft of 6.3mm. Overall 20.66mm high, shaft ID 6.2mm. (401-0097-01). Requires 8/32 set screw.
Learn More - Unidentified MFG - 5-356 - Hardware, springs. 0.34" x 2-3/8". Package of 4.$3.00IN STOCK - MORE THAN 500 READY TO SHIP!
Hardware, springs. Dimensions: 0.34" OD x 2-3/8" long. Package of 4.
Learn More - Unidentified MFG - 267082 - Hardware, knobs. Package of 10.$3.00Hardware, knobs. For potentiometers/trimpots, flat style. Color: white. Package of 10. Note: Perfect fit for our P/N: MS-022, SKU 5942 pot, not included. Learn More
- Tektronix - 401-0097-2 - Timing belt pulleys.$2.95Timing belt pulleys. Dimensions: Outer ID 23.8mm D x 14.2mm high. Inner belt area is 17.3mm D x 10.9mm high max. will fit a 7.68mm (0.302") shaft. New. Note: Unit is missing one needed set screw. Learn More
- RICHCO PLASTICS CO - N-7 .173 - Hardware, cable clamps. 7/16". Package of 50.$3.00Hardware, cable clamps. Dimensions: 7/16", 10.1mm ID, 13mm OD. overall 25.9mm high. Material: nylon. Color: natural. Package of 50. From manufactures 1000/bag. Learn More
- PacTec - K-CNL-0006BK - CNL-0006 Black Kit - Connector, Hood. D-SUB DB25 Hood Only, Enclosure, Project Box.
PacTec - K-CNL-0006BK - CNL-0006 Black Kit - Connector, Hood, Project Box.
The CNL-0006 is a large connector housing with a blank end and a DB-25 right angle end. Top and bottom covers snap together to house an assortment of applications.
CN Series
D-SUB DB25 Hood Enclosure.
Material: ThermoPlastic
Top and Bottom Covers Snap Together
Dimensions: 3.6" Long x 0.81/0.94" High x 1.7/2.3" Wide
Accept a PCB Approximately 1.5 inch x 2.5 inch.
Color: Black
Alternate: Newark 91F5275
RoHS Compliant
Made in USA
- EECO - 4-063 - Hardware, Adjustable Leveler Leg / Mount. 6/32 x 5/8". Package of 10.
EECO - 4-063 Hardware, Screw. Adjustable Leveler Leg / Mount / Dress Screw.
May be used as a Leveling Foot.
Material: Decroative Aluminum.
Dimensions: 3/4" Diameter
Recessed Head, 6/32 Thread X Stem Length 5/8" Long (Plate Fastener).
Applications: Instrumentation,
Package of 10.
Learn More - LFC - LFCPIN-1IN-1/4IN - 1/4 X 1 Inch Clevis Pin, Steel Heat Treated Pin with Zinc -Yellow Chromate Plated Finish. Package of 10.
LFC - LFCPIN-1IN-1/4IN - 1/4 X 1 Inch Clevis Pin, Steel Heat TreatedPin with Zinc -Yellow Chromate Plated Finish.
1/4" (0.250) Diameter, 13/16" Usable Length, 1.00" Overall Length
Max Cotter Pin 1/16”
Package of 10.
Learn More - T & B - P-48-175-9-L - Hardware, Cable Ties. 48" Long, Heavy Duty.READY TO SHIP - ONLY 61 LEFT IN STOCK!
T & B - P-48-175-9-L - Hardware, Cable Ties. 48" Long, Heavy Duty.
Material: Natural Polyamide (Nylon 6.6)
Tensile Strength Rating: 175 lb. (778 Newtons)
Color: Natural.
Learn More - Unidentified MFG - PT-256 - Hardware. Hose clamp 0.3" ID. Package of 50.$3.00Hardware. Hose clamp 0.3" ID. Package of 50. Learn More
- Unidentified MFG - PT-241 - HARDWARE PACKET$3.00HARDWARE PACKET with 8 pcs 1 1/2 inch. long #8 philip head screws & 8pcs. #8a speed nut. Learn More
- Keystone - PT-237 - Hardware, Spacer. Ceramic Standoff 1.25” X 0.50”.Special Price $3.49 Regular Price $3.95IN STOCK - MORE THAN 100 READY TO SHIP!Keystone - PT-237 - Hardware, Threaded Ceramic Spacer. Excellent mechanical strength, chemical erosion resistance, high wear/abrasion resistance and electrical isolation characteristics make these standoff insulators economical and practical for many applications. Material: Ceramic. Exceptional strength in compression and tension. Electrically Insulated and withstands High Temperatures (50 to 1700 F). Threaded for 8/32 screw on one end .50" deep. Radii on all edges. Overall Dimensions: 0.5" OD x 1.25" Long. (12.7 X 31.8 mm). Project Applications: Electronics, Mounting, Isolating. Similar to Cat No. 7670 but threaded only on one side. Learn More
- Unidentified MFG - PT-141 - Hardware, Rubber Grommet. 0.92" OD. Package of 10.
Hardware, Rubber Grommet.
Material: Rubber.
Dimensions: 0.925" OD x 0.50" Thick with an ID of 0.36".
Groove Diameter: 0.625"
Made for an 0.13" Thick Panel.
Package of 10.
Learn More