Hardware

DAKA-WARE - Davis Molding - 197267A1 - Hardware Fluted Finger Grip Knob.

Heavy Duty Knob for 1/4" (6.35mm) - 28 Shaft.

Twelve Flute Knob

Material: Compression Molded Phenolic (Bakelite)

Stronger & More Durable than Plastic

Color: Black 

Approximate Dimensions: 1.750" OD x 1.015" Depth With 0.075 Pilot Diameter

Molded-In Brass Insert threaded 1/4" - 28 over 0.50" Deep

Genuine Vintage DAKA-WARE - New Old Stock

Made in Chicago USA

 

Learn More

Mueller Electric Co - BU-60 series Hardware, Alligator Clips.

Jaw Opening: 0.310" (7.87mm)             

Current Rating (Amps): 10A       

Material: Steel     

Plating: Nickel   

Insulation: Non-Insulated  

Color: Natural

Length: 1.970" (50.04mm)           

Termination: Crimp or Solder

Note: May have a bit of "RUST" from moisture during storage.

Compatible with all shrouded, unshrouded, or retractable 0.16" (4mm) banana plugs, solder or crimp connection, jaw opens 0.31" (7.9 mm) max.

Material: Nickel-plated steel (BU-60).

Length: 1.97" (50mm).

Package of 25.

Learn More

MAGNAVOX Hardware, Knurled Knob.

For 1/4" Flat Flattened shaft.

Knurled edge for fingertip.

Material: Spun aluminum over plastic base.

Dimensions: 1-1/8" D x 0.882" high.

Has a 3/16" indicating line on top.

Color: Satin Silver. Nice Stereo/Amplifier Volume or tuning knobs.

Note: May in fact be only 6mm flattened shaft. Will fit our 1/4" shaft extender, but tight.

Similar to TE Connectivity KLN1250A1/4

See our large collection of knobs here:

https://www.electronicsurplus.com/hardware/knob

Learn More

DAKA-WARE - Davis Molding - DAK-P1105-27 - 1914-AS - Hardware, Instrument Knob.

For 1/8" (6.35 mm) shaft, with set screw.

Eight Knurled/Raised/ Ribbed Edges for ease of gripping.

Material: Compression Molded Phenolic Knobs

Black with Silver/Brushed Aluminum Tone Face and pointer.

Dimensions: 0.745"OD x 0.487" high. (21-30 mm)

New Old Stock

Made in Chicago USA

Lot of 2

Learn More

Project Box Enclosure.

ideal solution for virtually any plastic project box application. Designed for indoor use, ABS cases are molded from high-quality, flame-retardant ABS plastic.

Black ABS Plastic Box with Mostly Transparent Cover.

Dimensions: 3.3"square 1.4"D overall OD, 3.0" square x 1.1"Deep ID.

One slot in the side for an RJ jack 0.56 x 0.68" and an oval hTransparent Coverole about 1.5" high in the back for mounting. 2.5 oz.

Learn More

Cable Clamps. 1" Vinyl Coated Steel Clamp. 

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Diameter: 1".

Material: Vinyl Over Steel.

Package of 10.

Learn More

Hardware, Slider Knobs.

For Slide Potentiometers.

For Shaft: 0.159" x 0.060" thick.

Material: Plastic, Black with Silver Top.

With Tiny Pointer on one side.

Dimensions: 0.635" long x 0.390" deep x 0.521" high.

Package of 10.

Learn More

UMPCO - MS21333-77 Hardware, cable clamps.

Aerospace Cushioned loop clamp, 1" ID. Tongue hole type, oil resistant.

Distance from loop center to tongue end: 1.125".

Center to center distance between loop and mounting hole: 0.906".

Overall width: 0.625".

Material: Steel, carbon with synthetic rubber mil grade Mil-R-3065.

Material Thickness: 0.032".

Military NSN 5340-00-922-6300.

More info: http://www.umpco.com/products_pdf/NASM21333.pdf

Package of 2.

Learn More

Aavid Thermalloy - 2228B - NSN 5999-00-873-3812 - TO-39 / TO-5 Heatsink.

Low cost, easily installed, push-on heat sink. This device may be installed after assembly and takes up little additional board space.

Passive heat sink with 3 cooling fins for increased thermal performance

For TO-39 or TO-5 components.

Thermal Resistance: 40 C/W  - 3.0 Watt

Material: Black Anodized Aluminum.

Nominal Dimensions: 0.75" D x 0.4" high. (22.23mm x 13.49mm)

RoHS Compliant

NSN 5999-00-873-3812

Material Document and Classification: QQ-A-225/6 fed spec single material response

Surface Treatment Document and Classification MIL-A-8625, type 2, class 2 mil spec single treatment response.

Alternates: 078907-0001, 1205-0213, 1205-0213, 166267-1, 352-9619-110, 3522 500 23261, 505413, 802099-003, G03920

Replacement for NTE401

Similar to 322805B0000 

New Old Stock

Learn More

SPC Technology Multicomp - SPC15319 - MBP159 - Connector, Binding Post.

Commercial Quality - Compression Style

Contact Ampacity: 15 Amp.

Insulation Material: Non-insulated.

Accepts 14 AWG Wire 

Contact Plating: Bright Nickel Plated Brass Head and Body.

Mount: Panel Mount

Outside Dimensions: 10mm Diameter,.

Length:  14.30 Closed, 18.80mm Height Extended.

Note: Knurled Knob Screw Actuation. 2.8 x 4.7mm slot for wires.

Mounts from bottom with 6/32 screw (Not Included/ Purchased Separately).

RoHS Compliant

Alternate: Newark 79K4913, 159 HH SMITH

Applications: Instrumentation, Speakers, Laboratory Breadboarding.

Made in Taiwan.

 

Learn More

Dek Inc - Deklip - 022-0375 Hardware, Cable Clamp.

1" long x 1" deep x 0.56" high when closed, 0.38 x 0.5" ID when locked.

Exclusive Quick Lock / Release feature.

Material: PVC extruded, flame resistant PVC copolymer.

Listed: UL 94V-0 PVC.

Color: black.

Mount: Easy-to-Install Adhesive.

Package of 10.

 

Learn More

Cable Clamps. 1/4" Vinyl Coated Steel Clamp. 

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Diameter: 1/4".

Material: Vinyl Over Steel.

Package of 10.

With 0.40" slot mounting.

Package of 20.

Learn More

Hardware, Acrylic Spacers.

Material: Acrylic Plexiglass.

Clear Colorless.

Dimensions: 3/4" D x 2.0" high.

One end is drilled 1/4" x 0.8" deep.

Package of 8.

Learn More

Control & Instrument Switch Pointer Knob.

For 1/4" mount with 2 set screws.

Molded-in metal insert tapped for for added strength.

Bakelite Construction with Decorative Cap and Directional Pointer. 

Knurled Grip.

Approximate Overall Dimensions: 0.736" High X 0.731 Wide" X 1.206 Long (Pointer) (18.8 X 18.6 X 30.6 mm) 

Applications: Instrumentation, Test Equipment, Amplifiers, Stereos, Radios, and Switches

Vintage - Never Used - New Old Stock - Military Quality.

Proudly Made in USA

Learn More

345-0500 Hardware, Equipment Instrumetation Control Knobs.

Silver on Black, 20mm ("0.80") Diameter, 13.45mm Tall (0.53").

Silver Cap and White Indicating Pointer.

Ribbed Skirted Edges for Solid Gripping.

Ready for 1/4" (6.4 mm) Potentimeter or Switch Control having a Flattened Shaft ("D-Shaped"). 

Push-On, no set screw but has a metal insert for added strength

Potentiometer Knob.

Material:  Phenolic / Bakelite

Black w/White Line.

Vintage  - New Old Stock.

Learn More

Thermalloy/Aavid - 5-600 -  Hardware, Heatsink.

Designed for applicatons with airflow traveling in a single direction such as chassis, power supplies, chargers, and rectifiers.

Square Bar.

Extruded Aluminum Channel

Black Anodized.

Dimensions: 5.3" x 0.75" x 0.77".

Learn More

SOUTHCO - 6-302 - Hardware, Magnetic Door Latch.

Gain a lot of flexibility in applications where you can use these magnetic fastening latches instead of mechanically actuated latches. They are spring loaded for added versativity, are great for light or heavy sheet metal doors and enclosures, tolerate misalignment, and can even be used with non-metallic enclosures by adding a steel strike plate.

A heavy duty magnet 1.23" long x 0.36" thick including steel sides, with a heavy duty spring loaded push button 0.3"square that will push your door open when you push on it.

Will require a mating 1/4" or larger steel tab on door cabinet, when pushed the magnet pulls back.

Dimensions: 3" long x 1" x 0.5" thick.

Materal: Tough Polypropylene 

Mounts with two slots approximately 2.7" apart.

Note: Spring loaded to push open.

New Old Stock

Learn More

Picker International - Marconi - 189564 Hardware, Plexiglass / Acrylic Sheet.

Shatter-resistent or lightweight alternative for glass.

Plexiglas sheet is an excellent electrical insulator with a high dielectric constant.

More Heat thermal shock resisant than glass but also has thermal movement 8 times higher than glass.

Dimensions: 4.5" Square x 0.5" thick.

Clear.

Former Application Manufacturer of advanced medical diagnostic imaging systems.

Learn More

Hardware, knob. For switch banks with a square 1/8" shaft. material: plastic. Dimensions: 0.29" D x 0.272" high. Color: white. Package of 5. Note: Perfect fit for a switch bank like our SKU 1772, not included. Learn More

EF Johnson - 313-6608-012 - Hardware, Spacer.

Hex,

10/32 Thread, Female to Female.

Material: Aluminum.

Dimensions: 3/8" D x 3/8" long. (9.53 mm Diameter)

Package of 25. 

Learn More

Hardware, Acrylic Spacers.

Material: Plexiglass.

Clear Colorless.

Dimensions: 3/4" D x 2.6" high.

One end is drilled 1/4" x 0.8" deep.

Package of 8.

 

Learn More

PT-566 - Hardware, Spacers.

Stand-Offs/ Spacers.

Material: Nylon, Clear.

External 1/4-20 (9.5mm long) to Internal 6/32 Molded-In Brass Threaded Insert.

Overall 20.3mm Tall.

Body: 12.7mm D x 10.8mm tall.

Package of 10.

Learn More

Hardware, spacers. Or thick washers. Material: nylon. Color: natural. Dimensions: 0.377"OD x 0.175" ID x 0.186" thick. Package of 100. Learn More

Hardware, spacers. Fiber board. Dimensions: 14.2mm long x 6.4mm D, 1.6mm thick with 3.4mm ID. Unthreaded. Package of 100. Learn More