Hardware

DAKA-WARE - Davis Molding - 197267A1 - Hardware Fluted Finger Grip Knob.

Heavy Duty Knob for 1/4" (6.35mm) - 28 Shaft.

Twelve Flute Knob

Material: Compression Molded Phenolic (Bakelite)

Stronger & More Durable than Plastic

Color: Black 

Approximate Dimensions: 1.750" OD x 1.015" Depth With 0.075 Pilot Diameter

Molded-In Brass Insert threaded 1/4" - 28 over 0.50" Deep

Genuine Vintage DAKA-WARE - New Old Stock

Made in Chicago USA

 

Learn More

Mueller Electric Co - BU-60 series Hardware, Alligator Clips.

Jaw Opening: 0.310" (7.87mm)             

Current Rating (Amps): 10A       

Material: Steel     

Plating: Nickel   

Insulation: Non-Insulated  

Color: Natural

Length: 1.970" (50.04mm)           

Termination: Crimp or Solder

Note: May have a bit of "RUST" from moisture during storage.

Compatible with all shrouded, unshrouded, or retractable 0.16" (4mm) banana plugs, solder or crimp connection, jaw opens 0.31" (7.9 mm) max.

Material: Nickel-plated steel (BU-60).

Length: 1.97" (50mm).

Package of 25.

Learn More

MAGNAVOX Hardware, Knurled Knob.

For 1/4" Flat Flattened shaft.

Knurled edge for fingertip.

Material: Spun aluminum over plastic base.

Dimensions: 1-1/8" D x 0.882" high.

Has a 3/16" indicating line on top.

Color: Satin Silver. Nice Stereo/Amplifier Volume or tuning knobs.

Note: May in fact be only 6mm flattened shaft. Will fit our 1/4" shaft extender, but tight.

Similar to TE Connectivity KLN1250A1/4

See our large collection of knobs here:

https://www.electronicsurplus.com/hardware/knob

Learn More

Project Box Enclosure.

ideal solution for virtually any plastic project box application. Designed for indoor use, ABS cases are molded from high-quality, flame-retardant ABS plastic.

Black ABS Plastic Box with Mostly Transparent Cover.

Dimensions: 3.3"square 1.4"D overall OD, 3.0" square x 1.1"Deep ID.

One slot in the side for an RJ jack 0.56 x 0.68" and an oval hTransparent Coverole about 1.5" high in the back for mounting. 2.5 oz.

Learn More

Hardware, Slider Knobs.

For Slide Potentiometers.

For Shaft: 0.159" x 0.060" thick.

Material: Plastic, Black with Silver Top.

With Tiny Pointer on one side.

Dimensions: 0.635" long x 0.390" deep x 0.521" high.

Package of 10.

Learn More

Dek Inc - Deklip - 022-0375 Hardware, Cable Clamp.

1" long x 1" deep x 0.56" high when closed, 0.38 x 0.5" ID when locked.

Exclusive Quick Lock / Release feature.

Material: PVC extruded, flame resistant PVC copolymer.

Listed: UL 94V-0 PVC.

Color: black.

Mount: Easy-to-Install Adhesive.

Package of 10.

 

Learn More

Thermalloy/Aavid - 5-600 -  Hardware, Heatsink.

Designed for applicatons with airflow traveling in a single direction such as chassis, power supplies, chargers, and rectifiers.

Square Bar.

Extruded Aluminum Channel

Black Anodized.

Dimensions: 5.3" x 0.75" x 0.77".

Learn More

SOUTHCO - 6-302 - Hardware, Magnetic Door Latch.

Gain a lot of flexibility in applications where you can use these magnetic fastening latches instead of mechanically actuated latches. They are spring loaded for added versativity, are great for light or heavy sheet metal doors and enclosures, tolerate misalignment, and can even be used with non-metallic enclosures by adding a steel strike plate.

A heavy duty magnet 1.23" long x 0.36" thick including steel sides, with a heavy duty spring loaded push button 0.3"square that will push your door open when you push on it.

Will require a mating 1/4" or larger steel tab on door cabinet, when pushed the magnet pulls back.

Dimensions: 3" long x 1" x 0.5" thick.

Materal: Tough Polypropylene 

Mounts with two slots approximately 2.7" apart.

Note: Spring loaded to push open.

New Old Stock

Learn More

Hardware, knob. For switch banks with a square 1/8" shaft. material: plastic. Dimensions: 0.29" D x 0.272" high. Color: white. Package of 5. Note: Perfect fit for a switch bank like our SKU 1772, not included. Learn More

Hardware, Acrylic Spacers.

Material: Plexiglass.

Clear Colorless.

Dimensions: 3/4" D x 2.6" high.

One end is drilled 1/4" x 0.8" deep.

Package of 8.

 

Learn More

Hardware, spacers. Or thick washers. Material: nylon. Color: natural. Dimensions: 0.377"OD x 0.175" ID x 0.186" thick. Package of 100. Learn More

Hardware, spacers. Fiber board. Dimensions: 14.2mm long x 6.4mm D, 1.6mm thick with 3.4mm ID. Unthreaded. Package of 100. Learn More

Hardware, hinges. For cabinets or enclosures. Dimensions: 1-3/4" x 2". Package of 10. Learn More

Hammond Equipment Chassis Handles.

Status: Discontinued

Offset Round Handle

Black Anodized Aluminum.

Approx 4-3/4" long (offset), stands 1.25" off panel with 4-9/16" ctrs.

10/32 Threaded Hole Pull Handle

Package of 2.

Learn More

Hardware, Extension Spring with Hook Ends.

As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Rate is the amount of force required for every inch or mm of extension.

Dimensions: 1" OD x 12" (1 Foot) long.

Steel wire: 0.943"OD.

New Old Stock

Alternate: 9640K144

Learn More

Hardware, heatsink. For TO-3 components. Black. 8 Fin. Dimensions: 4-1/16" long x 3" wide x 1" high, rectangular. Learn More

ITW - 4041-00-5075 U-41 - Rubber Bumpers/Feet, Self-adhesive. 1 Sheet

High quality molded rubber Bumper stops are used on thousands of different applications and are made in various shapes and sizes to suit the needs of our customers. These crack-resistant, non-skid bumper pads do not contain plasticizers, oils or fillers. Additionally, they will not mar, scratch, or stain any surface. These bumpers feature an acrylic-based adhesive for long-term adhesion that has excellent solvent and ultraviolet resistance and have high shear strength.

• Abrasion resistant
• Excellent resistance to skidding and coefficient of friction
• Vibration and shock dampening
• Crack-resistant and resilient
• UL-recognized

Each Sheet contains a total of 105 Bumpers = 30 and 75 Self-adhesive Black PVC Round Bumpers

Dimensions: 30 Pieces 0.30" Diameter Tapered, 0.200" High and 75 Pieces Round, Dome Shaped 0.25" Diameter 0.085" High.

Not prepunched, must be cut out of sheet (Approximately 6" x 3").

One sheet of 105 Pieces.

Suggested Applications: Project boxes, under computers desktop calculators keyboards telephones and speakers to prevent vibration skidding or marring surfaces, under cutting boards to prevent skidding, crafts projects and many other uses. 

Proudly Made in USA

Learn More

Hardware, knob. Three triangular control surfaces. For 1/4" half flattened shaft. Material: plastic. Dimensions: 0.76"OD x 0.7" tall. Color: black. Package of 10. Learn More

Dritz - Anchor Hardware. "D" Ring for Straps.

Metal D Rings can be used to make tie downs straps, rigging, carry-on toool or travel bags.

Break Strength - Several Hhundred Pounds.

Material: Steel.

Has a Naval Anchor Stamped on it.

Dimensions: 1.158" wide, 0.87" ID x 0.6"ID.

Also has a Mounting Clip with 0.2" hole.

Color: Chrome Plated.

NOT FOR OVERHEAD LIFTING.

Package of 8.

Learn More

Keystone Hardware, Ceramic Spacers. Stackable Stand-offs.

Excellent mechanical strength, chemical erosion resistance, high wear/abrasion resistance and electrical isolation characteristics make these standoff insulators economical and practical for many applications.

Material: Unglazed Ceramic.

Protect Components from electrical charges.

Exceptional Strength in compression and tension.

Electrically Insulated Unthreaded Spacersand

Withstands High Temperatures (50 to 1700 F).

Screw size: #4.

Color: White/Beige - Not Catalog - Special Order

Dimensions: 0.261" (6.6mm) D x 0.261" (6.6mm) tall. 4 stacked together measure Approx. 0.925"

Cone Shaped Concave/Convext where one inserts within another approximately 0.040"

Inside screw diameter is 0.120" (3mm).

Package of 20.

Learn More

Hardware, enclosure. Small parts box with lid. Material: plastic, pink. Dimensions: 2-1/8" x 3/4" tall with lids. Please note: These boxes are extremely hard to open after closed without breaking. Package of 10. Learn More

Hardware. Shock mount 2-1/2" square.

Learn More

General Electric - CR215DBX02 - Threaded Barrel Proximity Switch Accessory

18mm Mounting Bracket

Made in USA

Learn More

Bivar Inc - 126-040 Hardware, Spacers.

Perm-O-Pads series, TO-5 to TO-18, T1-3/4 LED, Universal, 4 lead, with Open Center.

Material: Nylon 6/6 94V-2

Description: 0.040 wide x 0.040 long x 0.04 thick. (Ref. Attached Diaagram)

Color: White.

Package of 50.

 

Learn More