High Voltage

VICTOR ELECTRIC WIRE - UL 3239 - 3239-22-20KV - High Temperature High Voltage Cable

3239-22-20KV wire is a 22 awg wire having a high temperature, high voltage insulation made for easy stripping. These wires have high dielectric strength and are flame retardant. 

Cable, hook up.

22-1C. (22 AWG 1 Conductor).

High Voltage, 20KV, Anode.

Cable Diameter: 0.131".

Operating Temperature: 80 DegC.

Note: Prod 15519 117P7128, FR-1 UL AWM E20316.

Applications: TV receivers, stoves, heaters, furnaces, dryers, signs, lighting fixtures, and high-temperature electronic devices.

Package of 100 feet.

Learn More

Alimentation HV Power Supply. Tri-mode high voltage power supply. Used/RFE/Removed from equipment. Dimensions: 22 x 11 x 4cm. Learn More

CBO - Hardware, Insulator/Stand-Offs. Heavy Duty.

Material: Brass and Ceramic.

Base mount: Oval with 2-1/4" centers (1-5/8" x 2-7/8").

Dimensions: 4" Tall.

Porcelain Insulator: 1.25" Diameter

Brass Support: 1.625" Diameter

Weight: 1.1 lb.

Applications: High Power Transmitters 

Alternate/Similar: Lapp 14760 & 24114

Proudly Made in USA

Learn More

THOMSON TUBES ELECTRONIQUES - TH7122A - Power Supply.

High Voltage Alimentation Power Supply

Approximate Dimensions: 9" x 4 1/2" X 2"

Manufactured for Picker International / Marconi Medical Systems.

Made in France

New Old Stock

Learn More

Power Supply. Output: 0 to 1.1V(kV), 12mA 15 watt. Mount: PCB or Panel. Enclosed. Package/ case: C6. Dimensions: 4.75" long x 4" wide x 1.353" high, with four mount feet at 5-13/16" centers. Note: High Voltage. Learn More

Mallory - RW47V164 Resistor, Ceramic.

Resistance: 160K Ohm. (160,000 Ohms)

Tollerance: 5%

Power: 210 Watt.

Technology: Wirewound.

Package: 10.5"L x 1.28"D.

NSN: 5905-865-4618.

New Old Stock

Learn More

CLAROSTAT - RW47V164 Clarostat Power Resistor, Ceramic Wirewound.

Resistance: 160,000 Ohm. (160K) 

Power: 210 watt.

Package: Radial Lugs.

Dimension: 1.2" OD x 10.5" long.

Note: No hardware included.

NSN:5905-00-865-4618, DSA 900-67-M-XF08

Learn More

Hi Volt 20pf 5KVdc 10% Small door knob Hi Volt 13/16" dia x 11/16" high plus spacers. Has 2 threaded spacers for contacts. Learn More

UTC - TYPE 57 10KV - 57-100-10 - Capacitor, Ceramic.

• Small size
• Low dissipation factor
• Epoxy resin encapsulated
• Low DC, AC - voltage coefficient
• Excellent voltage characteristics
• Linear temperature characteristic
• Excellent behaviour on pulse and fast discharge

Ratings: 100pF 10KV.

Tolerance: 20%.

Low Profile Design

Doorknob, High Frequency.

Dimensions: 3.179" Diameter x 0.78".

Overall with Mount 2" Wide.

Note: High Voltage.

Made in UK

New Old Stock

Applications:Transmitters, Shortwave Transmissions, Induction Heating, Welding Equipment, Antenna coupling and decoupling, x-Ray Machines, Heating Devices, Gas laser, DC HV power supplies, Lightning arresters
Voltage distribution systems, Electron Microscopes, Synchroscopes
Electrostatic Coating Machines.

Learn More

High Energy HVCO - 160PF-7.5KVDC - Capacitor, High Voltage Ceramic, 160pF 7.5KVDC 7500VDC 10% "Axial DoorKnob", 1.15" Diameter x 1.68" Length, Lead Type: 10-32 Thread, Screw, Due to the use of paraelectric ceramics, these capacitors realize stable voltage characteristics, thereby achieving high reliability. Applications: Medical and Industrial X-ray imaging devices and RF Transmitters, Screws Purchased Separately. Made in USA, New Old Stock, Silver Plated Terminal Starting to Tarnish does not affect operation. Learn More

TDK 0054 Capacitor, High Voltage Ceramic Transmitting Doorknob Capacitor

TDK's ultra high voltage ceramic capacitors have over 40 years of development and sales history. They are used in various devices such as switches in distribution networks, circuit breakers in substations, and medical and industrial x-ray imaging devices. Due to the use of paraelectric ceramics, they realize stable voltage characteristics, thereby achieving high reliability.

Dual Ultra High Voltage Class 1 Ceramic Capacitors

2 X 500pF 15KV (15,000) VDC.

On metal bracket with two Capacitors as pictured.

Dimensions: 2-1/4" long x 2-1/4" high x 1" wide.

New Old Stock - Proudly Made in USA - Rare

• Antenna Traps
• High-voltage surge, gas circuit breaker in electric power transmitter, receiver devices, lightening arresters
• Improve the voltage distribution of high-voltage bushings and more
• Also for voltage distribution elements for the high-voltage measuring devices
• For impedance adjustment of a transformers and high-voltage AC circuits

Learn More

Sprague - CM55E202G - High Voltage Capacitor, Mica Dielectric

Capacitance: 0.002uF

Tollerance: -2/+2%

Voltage: 2.5KWVDC 5K WVDC TESTED

Temperture: -55 C to 85 C

CAPACITORS TYPE A2 or TYPE 9 or TYPE 101-9/16

Center to Center Terminal: 1.250"

MOUNT CTRS

Specification: 81349-MIL-C-5/9A

Dimensions: 1.750" X 1.312" (OVERALL 1-3/4" X 1-5/16" X 7/16")

Genuine Sprague - New Old Stock - Rare

NSN: 5910-00-184-0130

Alternate: MILC5-9

 

Learn More

SANGAMO - CD48365D2 Capacitors, Mica.

0.003uF 3KV, 1000KC, 8Amps.

Type 655-6H military.

Package: Heavy Molded Body, 2-5/8" mt ctrs.

Body 2-1/4" long x 1-1/4" deep x 1-3/4" high plus 2-screw terminals.

Learn More

Cornell Dubilier CDE - 1205-6K High Voltage Mica Transmitter Capacitor

Cast in rectangular cases, these capacitors are electrically equivalent to MIL-C-5 Styles CM65 through CM73 in capacitance and current ratings, but are far superior in environmental capability, temperature range, physical size, mounting configuration and reliability.

High Voltage Transmitting Rectangular Mica

Capacitance: 0.009uf (9000pF)

Voltage/Current Ratings: 1500V 7Amps

Frequency: 1000KC

Molded Body 2.228" Wide x 1.229" Deep x 1.789" Tall.

2.6" Mounting Centers.

Military FSN N 5910-184-6101

New Old Stock - Rare Difficult Component to Find New. 

Vintage Transmitting Capacitor, 2-Top Screw Terminals.

Applications: High-Current and High-Voltage Radio Transmitter Circuits.

Learn More

0.01uf 2200VAC Panel mount, HUGE 3.665" long x 2.014" Dia Round.Each end has one threaded screw terminal ctr'd. Learn More

WEST CAP - 16K10473-3 - High Voltage Capacitor.

Axial-lead tubular hermetically sealed solid tantalum capacitors have proven reliability and performance, combined with low leakage current, high capacitance and low dissipation factor with very high stability over time. They can withstand high frequency vibrations from 55 to 2000 Hz at 20g with no internal damage. Plastic film insulating sleeve hermetically sealed withstand life test of 2000 hours at 85 degrees C at rated WDCV. These capacitors have been proven in commercial, harsh environments of industrial and military applications. Solid tantalum capacitors are suitable for decoupling, blocking, by-passing, filtering and r-c timing circuits.

Capacitance: 0.047uF

Voltage: 1000VDC.

Package: Axial Leads.

Dimensions: 0.574" D x 1.136" Long.

High Voltage Solid - Rare

Note: Appears to be Tantalum but may be Hermetically Sealed Paper Capacitor Or PIO capacitors "Paper In Oil Tone Capacitor" designed for Audio and Guitars. Unable to locate Datasheet.

Alternate: CP12A1KG473K3

New Old Stock.

Learn More

Aerovox - P09D690 -Capacitor, Oil-Filled. 1uF 1000VDC. Dimensions: 1-13/16" wide x 1-1/16" deep x 2-1/16" Tall, Rectangular. Overall with Terminals 2-7/8" High. Rare, Removed from Equipment. Learn More

Mallory - CGS252T250V5L 2500UF 250VDC

Electrolytic Computer Grade Aluminum Capacitors

85 Deg C Max

Surge 300V

Dimensions: 5-5/8" tall x 2" dia.

Made in the USA

Learn More

GE INDUSTRIAL SYSTEMS - 23M322F450FH1H1 - Capacitor, Electrolytic.

Capacitance/Voltage: 3200uF 450VDC.

Material: Aluminum, Computer Grade.

Dimensions: 3" Diameter x 5.125" high.

Operating Temperature: 85 Deg C.

Note: High Voltage.

Capacitor Terminals :Screw

Lifetime @ Temperature:2000 hours @ 85°C

Polarity:Polar

Product Range:23M Series

RoHS Compliant: Yes

Note: GE now GE Gentech

ALternate: Cornell Dubilier 550322T450DF2B

Learn More

Capacitor, electrolytic. 4700uF 400V. Tolerance: +/-20%. Surge: 450V. Dimensions: 3" D x 6" high. Operating temperature: 85 Deg C max. High Voltage. Computer grade. Note: no screws 1/4 x28 - 5/8"long. Learn More

RCA - SK3868/DIV1 - High Voltage Divider.

HVDC TV CRT Focus Divider.

Can be Used to measuring High Voltage DC - A good voltage divider that can be used for the purpose of high-voltage measurements is the RCA SK3868/DIV-1, a high-voltage DC divider; it’s used in TV’s to reduce the final anode voltage going to the CRT to the level required for the focus voltage. It consists of resistors R1 (200 megohms) and R2 (40 megohms) in series, as shown in Fig. 4. There are three leads, one for the free ends of each resistor, and the other at their juncture. If you put both a 10-megohm meter (shown as Z_M in Fig. 4) and a 2.7-megohm resistor (R3) in parallel with the 40-megohm resistor (R2), you can achieve almost exactly 100:1 range multiplication, for a full-scale deflection of 20 kilovolts DC.

Genuine Vintage RCA - New Old Stock

Learn More

NTE Electronics Inc. - NTE536A Voltage Mulitiplier.

Input Peak to Peak (No Load): 8kV

Maximum Continuous Output (at 2mA, No Load): 30kV

High Voltage. 8-Step Silicon Quadruple with Focus Tap.

Dimensions: 3.580" X 2.75" X 1.620"

Mounting Holes: 0.190" Diameter

New Old Stock

Learn More