Ferrite & Toroid Core

EMI Suppression Filters. Chip ferrite bead. Impedance: 1000 Ohm 200mA. DC Resistance: 0.4 Ohm. Package: SMD 0805. Package of 25. Note: For high speed signal. Learn More

Inductor, ferrite bead. EMI Suppression Filters. Impedance: 1 Ohm. Package: SMD 0805. Package of 25. Note: For power lines. Learn More

Inductor, ferrite bead. EMI suppression filter. 600 Ohm 200mA 25%. DC Resistance: 1.1 Ohm. Case: 0805 SMD. Paper tape on manufactures 7" reel. New parts. Note: Package of 50. Learn More

Inductor, ferrite. 1.5uH 545mA 420mOhm. Tolerance: 10%. Shielded. Case: tiny SMD. Note: Made in the USA. Package of 10. Learn More

MICROMETALS - T157-8/90 Toroids.

The T157-8/90 Toroidal core from Micrometals is a size Toroidal core manufactured from Micrometal's unique blend 8/90 material. and can be clearly identified by the cores' Yellow/Red color.

Powdered Iron Core

AL= 42 (nH/N2) +/- 10%

Initial Permeability = 35u

Package: 40.2mm OD x 24mm ID x 14.7mm thick.

Color: yellow with red.

From: 240pc / box.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

Inductor, ferrite. Inductance: 6.8uH. Tolerance: 20%. DC Resistance: 1.5 Ohm. Current: 0.24Amp. Package: 1212 SMD. T/R. Note: Operating temperature: 85 Deg C. Package of 4. Learn More

Inductor, ferrite. 15uH @ 2.5MHZ, 0.18Amp. Tolerance: 2%. Package: 0805 SMD. Rohs compliant. Package of 10. Learn More

Inductor, coil. Inductance: 56uH. Current: 190mA. Tolerance: 10%. Ferrite. Technology: wirewound. Case: axial leads. New. Learn More

Inductor, ferrite. 100uH 2mA. Tolerance: 10%. Shielded. Q @ Freq 25 @ 1MHz. Frequency - Self Resonant: 12MHz. DCR: 3.1 Ohm. Package: SMD 0805 (2012 Metric). Lead free. Rohs compliant. Package of 20. Learn More

FAIR-RITE - 0443163951 - Filter, Ferrite.

Split Ferrite Core.

part Number Case: 0199163951

Grade: 43.

Impedance: 290 Ohm.

Frequency: 100MHz.

Dimensions: 2.67" wide x 0.32" deep x 1.272" long.

Cable Width: 2.03".

For Ribbon Cable.

Additional Info: http://www.fair-rite.com

Learn More

Inductor, ferrite. Core. Dimensions: Round 0.504" (12.8mm) D x 0.185" (4.7mm) wide (0.093" / 2.3mm thick), with an ID of 0.315" (8.0mm). Package of 10. Learn More

EMI Suppression Filters. Chip ferrite bead. Impedance: 220 Ohm 2Amp. Package: SMD 0805. Note: Manufactures 7" reel is double marked BLM21P221SGPTM00-03. Package of 25. Learn More

MICROMETALS - T130-0 Inductors, RF toroids.

Iron Powder Cores.

AL= 1.5 (nH/N2) +/- 10%

Material: Phenolic

OD = 1.30 / 33.0 mm +/- 0.02 in

ID = 0.780 in / 19.8 mm +/- 0.02 in Ht = 0.437 in / 11.1 mm +/- 0.025 in AL= 1.5 +/-5%

50 MHz - 350 MHz 

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

MICROMETALS - T106-0 Inductors, RF toroids.

AL=1.9 +/- 5 %

RF Phenolic Toroid

Dimensions: 1.06" OD x 0.437" high, with 0.57" ID and 0.260" thick walls.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

Inductor, ferrite. "E". Dimensions: 0.986" (25mm) wide x 0.649" (16.5mm) deep x 1.916" (48.6mm) high. Top of ferrite and lower sections are only 0.306" (7.7mm) high. Each with an inside curve toward the center. Center scection of ferrite is round 0.653" (16.5mm) D. Note: Sold one @ $4.00 USD. Learn More

ISKRA FERITI - FP15G100 51-00 - Ferrite Rod. Perfect for Amateur and Crystal Radio.

The Iskra Feriti (Iskra Ferrites) company has more than 40 years’ experience in the production of ferrite materials and products.

Ferrite Rods, Bars, Plates and Tubes. Ferrite rods, bars, slugs, plates and tubes are primarily used as magnetic cores in radio antennas, chokes, inductors and filters. In radio antennas, ferrite rods are useful from VLF spectrum to VHF spectrum. The advantages are small size, high Q and compactness. They are used for their properties of high magnetic permeability coupled with low electrical conductivity (which helps prevent eddy currents).

Ferrite Rod Core is a cylindrical ferrite core, can be easily assembly with a spring coil or wind wire directly. It's widely used for radio antenna, LF/HF RFID antenna, choke coil, inductor, DC power filter, DC signal filter and transformer. Due to the open magnetic structure, the core can accept large DC bias before saturate. The rods are design to use for MW and shortwave antenna coils; in high frequency applications they have low loss characteristics.

Large ferrite rod made for radio "Loopsticks"

Authentic Vintage Iskra Ferite - New Old Stock

Dimensions: 10mm D x 50.8mm long. (0.394" X 1.969")

Additional Information: http://www.holmmagnetics.dk/html/kurver.html

Learn More

Inductor, coil. Toroid. Value: 30uH. DCR Ohm: 0.019. Mount: PCB, vertical. Case: radial leads. Dimensions; 0.810" D x 0.349" wide. New. More info: http://www.hurricaneelectronics.com/filterInductor.php Learn More

Inductor, core. Toroid 0.378" (9.6mm) OD, 4.7mm ID x 3.6mm thick. With two tiny windings of 5 turns each. Over one inch long leads. ACME of Japan. Package of 10. Learn More

TOROID #12 WIRE WOUND ON A 1.5" SQUARE x 1"THICK COIL FORM. Learn More

Inductor, coil. 1000uH 0.28Amp 20% 4.32Ohm 113uSec. Case: SMD, shielded. Note: From manufacture new T/R. More info: http://www.moxieinductors.com/Shielded_Inductors_files/MOXIE_SPI_0703_SERIES_REV_A.pdf. Package of10

Learn More