Inductors & Coils

Micrometals - T131-18 Inductor, Core.

The T131-18 from Micrometals is a size 131 Toroid core manufactured from Micrometal's unique blend 18 material. This material has low core loss similar to the -8 Material with higher permeability and a lower cost. Good DC saturation characteristics. Material reference permeability (µo) is typically 55 and can be clearly identified by the core's Green/Red color.

79 Al nH/N(2).

Dimensions: 1.300" (33.0mm) OD x 0.437" (11.1mm) high with 0.780" (19.8mm) ID.

Color: Green/Red.

Powdered iron core.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

COILCRAFT - G6886A - Inductor, coil. Slot Seven Tunable.

These versatile Coilcraft variable inductors operate over a wide range of frequencies. Standard inductance values are available from less than 100 nH to over 250 µH. Custom values can also be provided upon request.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.38uHy (0.38-microhenrey) RF Coil

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternate: 7M3-331

COILCRAFT - G6887A - 0.75uHy Inductor, Choke Coil, Slot seven Tunable.

Coilcraft tunable coils provide the compactness of a 7mm coil and the low drift reliability of an insert molded coil. The windings of these economical coils are precision molded into a single piece of polypropylene for mechanical and electrical stability. Plated brass shield cans with solderable tabs provide integral shielding and additional mounting stability.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.75uHy (0.75-microhenrey) RF Coils

Tunable RF Indusctor coils

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternates: 7M2-683, 7M2-823

COILCRAFT - G6978A - 0.93uHy Inductor, Choke Coil, Slot Seven Tunable.

Coilcraft tunable coils provide the compactness of a 7mm coil and the low drift reliability of an insert molded coil. The windings of these economical coils are precision molded into a single piece of polypropylene for mechanical and electrical stability. Plated brass shield cans with solderable tabs provide integral shielding and additional mounting stability.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.75uHy (0.75-microhenrey) RF Coils

Tunable RF Indusctor coils

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternates: 7M2-104, H7095A

CADDELL BURNS - 6740-14 Inductor, coil.

Inductance: 1.2uH.

Package: PCB 4 Pin. 7.9mm square x 10.7mm above board.

Note: Variable/adjustable inductor. Shielded metal can.

CADDELL BURNS - 6740-17 Inductor, coil.

Inductance: 2.2uH.

Package: PCB 4 Pin. 7.9mm square x 10.7mm above board.

Note: Variable/adjustable inductor. Shielded metal can.

TOKO AMERICA - A993AS-6R8M

6.8uH 20% 0.11-Ohm SMD

Fixed Inductors DB320C Series,

3.8mm footprint

Manuf in China/manuf pkg'd.

Vishay DALE - IHA-502 Inductor, choke.

10uH 8.3Amp 0.015 Ohm.

Tolerance: 10%.

Mount: PCB.

Package: Axial leads.

Dimensions: 0.475" (12.07mm) D x 1.05" (26.67mm) long.

Note: Filter inductors, high current.

Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements.

Inductor, Coil. 12uH.

Ferrit Core, Adjustable.

Mount: PCB.

Base is 12.6mm Square, Overall 24.9mm above board.

Eaton Coiltronics Cooper - VP1-0190-R Inductor, Transformer.

Inductance: 12.2uH., 0.145 Ohm

Current: ISAT 0.43 Amp, IRMS 0.85 Amp.

Tolerance: 20%.

Operating temperaure: -40 to 85 Deg C.

Package: VP SZ 1, SMD low profile.

From: Manufactures T/R.

Note: Cooper Electronic Technologies/Coiltronics.

COILCRAFT - D03316P-153MLD - Inductor, Coil.

15uH 3Amp

Tolerance: 20%

DC Resistance: 0.046 Ohm (46mOhms).

Type: Wirewound

Self resonant Frequency: 27 MHz

Dimensions: 9.4mm x 5.21 x12.95

Package: SMD.

PULSE ENGINEERING - P0841 - Inductors, Toroidal.

Status: Discontinued

Series: Klipmount

Inductance: 22.8 uHY.

Current: 4.9ADC

Max. DC Resistance: 36mOhms

tolerance; 20%

Mount: PCB 2 pin.

Self Resonant Frequency: 260 KHz

Shielding: Shielded

Temperature: -40 C to 130 C

Dimensions: 0.830" x 0.450" (21.09mm x 11.43mm)

CADDELL BURNS - 6740-30  Inductor, coil.

Inductance: 27uH.

Package: PCB 4 Pin. 7.9mm square x 10.7mm above board.

Note: Variable/adjustable inductor.

Shielded metal can.

Inductor, coil. 30uh. Package of 10

TOKO AMERICA - 3728391-1 Inductor, coil. 15-30uH.

Marked 8391-ITW.

Screw adjustable.

Package: shielded.

Mount: PCB 3 pin plus ground.

Note: This coil is 7.4mm square at the base, 10.89mm high and the shield is 7.25mm OD.

SOUTH HAVEN COIL, INC - 6-070 

Inductor, coil. 30uH slug form.

PULSE ENGINEERING - P0848 - Inductors toroid.

KlipMount™ Series

inductance: 52uH

Current: 5 ADC.

Mount: PCB 2 pin.

More info: http://ww2.pulseeng.com/products/datasheets/SPM2007_46.pdf

Alternate: National LM267X-L48