Inductors & Coils

Inductor. 330uH 0.06Amp 5.6MHz. Case: SMD J bend connections. New. Package of 10. Learn More

Inductor, ferrite. 1.5uH 545mA 420mOhm. Tolerance: 10%. Shielded. Case: tiny SMD. Note: Made in the USA. Package of 10. Learn More

Micrometals - T131-18 Inductor, Core.

The T131-18 from Micrometals is a size 131 Toroid core manufactured from Micrometal's unique blend 18 material. This material has low core loss similar to the -8 Material with higher permeability and a lower cost. Good DC saturation characteristics. Material reference permeability (µo) is typically 55 and can be clearly identified by the core's Green/Red color.

79 Al nH/N(2).

Dimensions: 1.300" (33.0mm) OD x 0.437" (11.1mm) high with 0.780" (19.8mm) ID.

Color: Green/Red.

Powdered iron core.

Genuine MicroMetals product

Recommended uses: Line filters, Power conversion

Additional Information: http://c1170156.r56.cf3.rackcdn.com/UK_MIS_PC_Series_Issue_L_DS.pdf

Learn More

COILCRAFT - G6886A - Inductor, coil. Slot Seven Tunable.

These versatile Coilcraft variable inductors operate over a wide range of frequencies. Standard inductance values are available from less than 100 nH to over 250 µH. Custom values can also be provided upon request.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.38uHy (0.38-microhenrey) RF Coil

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternate: 7M3-331

Learn More

COILCRAFT - G6887A - 0.75uHy Inductor, Choke Coil, Slot seven Tunable.

Coilcraft tunable coils provide the compactness of a 7mm coil and the low drift reliability of an insert molded coil. The windings of these economical coils are precision molded into a single piece of polypropylene for mechanical and electrical stability. Plated brass shield cans with solderable tabs provide integral shielding and additional mounting stability.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.75uHy (0.75-microhenrey) RF Coils

Tunable RF Indusctor coils

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternates: 7M2-683, 7M2-823

 

Learn More

COILCRAFT - G6978A - 0.93uHy Inductor, Choke Coil, Slot Seven Tunable.

Coilcraft tunable coils provide the compactness of a 7mm coil and the low drift reliability of an insert molded coil. The windings of these economical coils are precision molded into a single piece of polypropylene for mechanical and electrical stability. Plated brass shield cans with solderable tabs provide integral shielding and additional mounting stability.

Coilcraft “Slot Seven” RF coils come in an international 7 mm package. Their precision-molded slotted bobbins ensure tight tolerances and high stability.

A variety of shielding options are offered. “Slot Seven” coils are tuned by means of slotted ferrite tuning cores for easy, positive adjustment. Use the Coilcraft Slot Tuner for a precise fit to the tuning slug.

0.75uHy (0.75-microhenrey) RF Coils

Tunable RF Indusctor coils

Adjustable Ferrite Core.

Package: Shielded Metal Can 7mm

Dimensions: 7.62 mm X 7.62mm.

Height above PCB: 11.68mm

New Old Stock

Genuine Coil Craft 

Made in Taiwan

Alternates: 7M2-104, H7095A

 

Learn More

Inductor, coil. 4uH. Mount: PCB. Package of 20. Learn More

Inductor, ferrite. Inductance: 6.8uH. Tolerance: 20%. DC Resistance: 1.5 Ohm. Current: 0.24Amp. Package: 1212 SMD. T/R. Note: Operating temperature: 85 Deg C. Package of 4. Learn More

Inductor, ckoke. Inductance: 10uH. Current: 140mA. Tolerance: 5%. DCR: 2.1 Ohm. Material: ferrite. Package: 1210 SMD. Package of 25. Learn More

Vishay DALE - IHA-502 Inductor, choke.

10uH 8.3Amp 0.015 Ohm.

Tolerance: 10%.

Mount: PCB.

Package: Axial leads.

Dimensions: 0.475" (12.07mm) D x 1.05" (26.67mm) long.

Note: Filter inductors, high current.

Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements.

Learn More

Inductor, Coil. 12uH.

Ferrit Core, Adjustable.

Mount: PCB.

Base is 12.6mm Square, Overall 24.9mm above board.

 

Learn More

Eaton Coiltronics Cooper - VP1-0190-R Inductor, Transformer.

Inductance: 12.2uH., 0.145 Ohm

Current: ISAT 0.43 Amp, IRMS 0.85 Amp.

Tolerance: 20%.

Operating temperaure: -40 to 85 Deg C.

Package: VP SZ 1, SMD low profile.

From: Manufactures T/R.

Note: Cooper Electronic Technologies/Coiltronics.

Learn More

PULSE ENGINEERING - P0841 - Inductors, Toroidal.

Status: Discontinued

Series: Klipmount

Inductance: 22.8 uHY.

Current: 4.9ADC

Max. DC Resistance: 36mOhms

tolerance; 20%

Mount: PCB 2 pin.

Self Resonant Frequency: 260 KHz

Shielding: Shielded

Temperature: -40 C to 130 C

Dimensions: 0.830" x 0.450" (21.09mm x 11.43mm)

 

Learn More

Inductor, coil. 30uh. Package of 10

Learn More

PULSE ENGINEERING - P0848 - Inductors toroid.

KlipMount™ Series

inductance: 52uH

Current: 5 ADC.

Mount: PCB 2 pin.

More info: http://ww2.pulseeng.com/products/datasheets/SPM2007_46.pdf

Alternate: National LM267X-L48

Learn More

TDK/CAL-CHIP 56-uH SMD new inductors taped off reelhttp://www.tdk.co.jp/tefe02/e511_nl4532.pdf Learn More

Inductor, coil. Inductance: 56uH. Current: 190mA. Tolerance: 10%. Ferrite. Technology: wirewound. Case: axial leads. New. Learn More

Inductors. Toroidal, 100uh 2.6A. Dimensions: 0.750" dia. x 0.32" thick pcb mount, vertical. Learn More

Inductor, choke. Inductance: 100uH 330mA. Tolerance: 5%. Package: axial leads. Dimensions: 7.8mm D x 22.7mm long. Learn More

Inductor, choke. 100uH 2Amp 0.216 Ohm. Tolerance: 20%. High inductance, high current hash filter choke. Ferrite core. Package: axial leads. Dimensions: 0.38" (9.65mm). RoHS compliant. More info: http://www.bourns.com/data/global/pdfs/5200_series.pdf Learn More

Inductor, RF. Inductance: 100uH. Maximum Current: 370ma. Tolerance: 5%. Package: axial leads. High frequency. Package of 10. Learn More

VISHAY DALE - IHD1-100UH Inductor, coil.

Inductance: 100uH.

Power: 1.1Amp.

Tolerance: 15%.

Package: Axial Leads.

Dimensions: 0.270" D x 0.70" long.

More info: http://www.vishay.com/docs/34016/ihd.pdf

Learn More

PULSE ENGINEERING - PE-54037S - Inductor.

Inductance: 114uH 150KHz.

Current: 2.22Amp.

Tolerance: 20%.

DCR: 100mOhm.

Package: SMD,

Dimensions: 0.940" long x 0.940" wide x 0.400" high (23.87mm x 23.87mm x 10.16mm).

National LM259X-L37

Learn More

RAM - RAM1811 - Inductor, Coil.

Type Toroid, Low Radiation

Inductance: 150uH.

Current Rating: 3.6 Amp

Forty Five Turns of 20AWG magnet wire.

Mount: PCB.

Operating Temperature: -55 to 105 °C

Dimensions: 0.833" D x 0.423" deep x 0.849" high.

Lead spacing: 0.261" - 0.275".

Note: Batch 93-27.

Alternates: Uxcell a13071500ux0195, Bourns 2114-RC

Learn More