Inductors & Coils

Carter Craft Communications - 90-012 - CB/HAM Radio Alternator / Generator Filter, 3 to 30 MHz.

Radio Noise Suppressor Filter

Maximum Current: 25 Amps

Filters "Whining" Noise from Generator Brushes

Easily Installed in Minutes

Large Inductor and Tunable Ceramic Capacitor design for maximum efficiency

For 6, 12 or 24 VDC Systems

Installation instruction attached and on Packaging.

New Old Stock - Made in USA

Alternate / Equivalent: Monarch GNF-1

Learn More

Bourns - J.W.MILLER - 50A226EBI Inductor.

1.26uH - 2.75uH adjustable encapsulated.

Q=76@7.9Kc.

Mount: panel.

Dimensions: 0.437" D x 1" long.

Complete with manufactures specification sheet.

Genuine Vintage JW Miller New Old Stock

Learn More

Inductor, choke. 3.8uH 1KHz 0.005 Ohm, 9000mA. Tolerance: 20%. Saturated DC amp: 40A. Dimensions: 16.4mm D x 20.7mm high. Lead spacing: 13.5mm. More info: http://www.wilcocorp.com/catalog/series.cfm?series=DC1 Learn More

Bourns - J.W.MILLER - 50A826EBI Inductor.

4.4 - 10.2uH Adjustable Encapsulated.

Q=68@7.9Mc.

Mount: Panel.

Dimensions: 0.437" D x 1" long.

Genuine Vintage  J.W. Miller - New Old Stock - Rare

Complete with manufactures specification sheet.

Learn More

RENCO - RL1256-3-18 - Power Line Inductor, Choke.

Ratings: 18uH 0.010 Ohm 13.5Amp.

High saturation flux density material is ideal for use in switching regulated power supply applications.

Ideal wherever high current choke values in a small physical size are needed

DC Saturated Amps: 29Amp.

Operating temperature range: -40°C to +130°C

Dimensions: diameter 1.10" x Height 0.85" (27.94mm x 21.59mm)

Typical applications include: power amplifiers, power supplies, SCR and TRIAC controls, speaker crossover networks and filters.

 

Learn More

Bourns - J.W.MILLER - 50A225EB Inductor.

11.7 - 27.4uH adjustable encapsulated.

Q=72@2.5Mc.

Mount: panel.

Dimensions: 0.437" D x 1" long.

Complete with manufactures specification sheet.

Learn More

VISHAY DALE - ITU-1731-4 High Current Toroid Inductor Copper Coil Horizontal Mount 50uH 40A Toroid inductance coils are important electrical components for preventing electromagnetic interference, widely used in supply circuits, miniature TVs, adapters, DC-DC power modules, various electronic products, etc. The advantage of the toroidal shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (Leakage Flux) is low, therefore it is more efficient and thus radiates less Electromagnet Interference (EMI). Large Low Loss, Ferrite Core with stable electrical operating characteristics maximize inductor efficiency by minimizing copper losses High-Reliability Low-Resistance Leaded Inductor. Toroid Cores are Self Shielded requiring no need for an enclosure. Inductance: 50uH Current: 40Amp. Inductance @ 1Vrms, 10Khz, 40Amps DC: 50uH min. Inductance @ 1Khz w/out DC: 60uH DC-Resistance: 0.01 Ohms. Wire Diameter: 1.83mm (0.071") 11 AWG Core Material: Ferrite Dimensions: 2.2" Diameter x 1.1" High. Connections: Quick Connect or PCB Solder Mounting. Note: Leads are approximately 1" Long and some have 1/4" Quick Connects attached. Operating Temperature: -55°C to 125°C Extremely Conservative Design Current Rating. We counted about 64 turns of 13AWG Enameled Magnet Wire on this High Current Toroid Choke designed to rid audio equipment noise from the lights and props used on a commercial stage. Applications: Applications: EMI Filters, Buck and Boost Switches, Ballasts, Medical, Telecommunications, Musical Instruments, Industrial Controls, Chokes, Power Supplies, Inverters, Amplifiers and Control Circuits. Made in USA – Factory New Large Quantity Available, Discounted Special order Toroid where some units have quick disconnect and other's don't directly from Vishay Dale Factory. Learn More

J.W.MILLER - 50A475EBI Inductor.

26.5 - 58.7uH adjustable encapsulated.

Q=52@2.5Mc.

Mount: panel.

Dimensions: 0.437" D x 1" long.

Complete with manufactures specification sheet.

Learn More

Bourns - J.W.MILLER - 6100-650 Inductor, RF.

Inductance: 65uH.

Tolerance: 10%.

Unshielded.

Mount: PCB.

Package: 8 Pin gull-wing leads.

Learn More

Inductor, chip. 100uH 93mA. Package: SMD. Without tab termination. Operating temperature: -55 to 125 Deg C. More info: http://ve1.com/images/product_pdfs/26k_ser.pdf Learn More

Bourns - J.W.MILLER - 50A154EBI Inductor.

92 - 187uH adjustable encapsulated.

Q=52@790Kc.

Mount: panel.

Dimensions: 0.625" D x 1" long.

Complete with manufactures specification sheet.

Learn More

Inductor, coil. Inductance: 208uH. Conservative rating: 60mA. Frequency: 3-13 Mc. Ceramic coil form. Application: Designed to cover the major Amatuer and Industrial communication frequencies. Dimensions: 0.500" D x 3.503" long. Contacts: solder terminals. Note: Radio frequency choke. Frequency selective RF chokes. Made in the USA. Learn More

Bourns - J.W.MILLER - 50A224EBI Inductor.

130 - 275uH adjustable encapsulated.

Q=53@790Kc.

Mount: panel.

Dimensions: 0.625" D x 1" long.

Complete with manufactures specification sheet.

Genuine Vintage JW Miller  New Old Stock

Learn More

VISHAY DALE - IHB5-560 - Filter Inductor, High Current, Radial Leaded, Coil

Toroid inductance coils are important electrical components for preventing electromagnetic interference, widely used in supply circuits, miniature TVs, adapters, DC-DC power modules, various electronic products, etc. The advantage of the toroidal shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (Leakage Flux) is low, therefore it is more efficient and thus radiates less Electromagnet Interference (EMI).

560uH  5 Amp, 0.105 Ohm.

DCR Max. (Ohms): 0.105

Rated DC Current (Amps): 5

Lead E Spacing: 1.07 (28.18)

Max. Lead "F" Diameter: 0.045 (1/15)  

Tolerance: 10%.

Mount: PCB, Open Frame.

Core Material: Ferrite

Dimensions: 1.60" (Diameter) x 1.45" Coil Height) x 0.175" (core Diameter).

Additional Information: https://www.vishay.com/docs/34015/ihb.pdf

 

Learn More

Bourns - J.W.MILLER - 50A684EBI Inductor.

400 - 850uH adjustable encapsulated. Q=52@790Kc.

Mount: panel.

Dimensions: 0.625" D x 1" long.

Complete with manufactures specification sheet.

Learn More

Inductor, coil. Toroid 1mH 0.4 Ohm resistance. Dimensions: 1.202" (30.5mm) D x 0.539" (13.6mm) thick with and ID of 0.470" (11.9mm), two 6" wire leads. Learn More

Inductor, chip. 1000uH 47mA. Package: SMD. Without tab termination. Operating temperature: -55 to 125 Deg C. Learn More

Bourns - J.W.MILLER - 50A153EBI Inductor.

0.950 - 1.87mH adjustable encapsulated.

Q=51@250Kc.

Mount: panel.

Dimensions: 0.625" D x 1" long.

Complete with manufactures specification sheet.

Learn More

Bourns - J.W.MILLER - 50A683EBI Inductor.

5.2 - 8.56mH adjustable encapsulated.

Q=46@250Kc.

Mount: panel.

Dimensions: 0.625" D x 1" long.

Complete with manufactures specification sheet.

Learn More

NORTHLAKE ENGINEERING INC. - B24-115 - Inductor, Choke.

Northlake Engineering has been designing, developing, and delivering custom magnetics solutions for over 60 years. A Standex Electronics Company.

A superb quality DC choke for any valve project.

Swinging Choke 100MH

Dual Fuse Holders Mount on Frame

100 mADC 50MH 2Amp.

Proudly Made in USA

Learn More

Inductor. Core and choke assortment.

Miscellaneous small chokes used in "RCA TAC-TEK" radios.

Minimum of 150 to over 200 inductors in each bag.

 

Learn More

RENCO - RL1256-3-27 - Power Line Inductor, Choke.

Ratings: 18uH 0.010 Ohm 13.5Amp.

High saturation flux density material is ideal for use in switching regulated power supply applications.

Ideal wherever high current choke values in a small physical size are needed

DC Saturated Amps: 29Amp.

Operating temperature range: -40°C to +130°C

Dimensions: Diameter 1.10" x Height 0.85" (27.94mm x 21.59mm)

Typical applications include: power amplifiers, power supplies, SCR and TRIAC controls, speaker crossover networks and filters.

Learn More

PHILMORE - L-72 - MIDGET BROADCAST BAND UNIVERSAL OSCILLATOR

ADJUSTABLE COIL

RADIAL 5-LEADS RADIAL COIL/INDUCTOR

NEW

Learn More

Many turns of tiny magnet wire Inductor New with 2 radial leadsOverall 15.2mm dia x 6.8mm thick. Learn More