Hardware > Enclosures



85 Results  1 2  
Mfg. Part # Description Condition Price Buy
Bird
4144-060
Enclosure. For Bird Electronics products. Material: metal.Dimensions: 3.25" x 1.25" square. New (un-used) $15.00
Unmarked
8-043
Enclosures, project box. Material: plastic. One semicircular hole about 11/16" x 3/8" for wires. Bottom plate lifts off with five pins holding it securely in place. Inside dimensions 2-3/4" square x 1-1/4" deep. Two mounting flanges on opposite sides of bottom, mounts on 3-1/4" centers. Color: black. Package of 2. New (un-used) $3.00
Plast-A-Matic
Project Box
Enclosure. Instrument enclosure, 2 piece top & bottom. Snaps together, requires 4 screws (not included). Front panel would be  approximately 5.25"wide  x 2.5" tall (not included). Material: plastic. Actual dimensions: 138 x 71 x 130mm deep. Color: gray. Un-used but old $2.88
Unmarked
MS-278
Enclosure. Black plastic box with mostly transparent cover. Dimensions: 3.3"square 1.4"D overall OD, 3.0" square x 1.1"Deep ID. One slot in the side for an RJ jack 0.56 x 0.68" and an oval hole about 1.5" high in the back for mounting. 2.5 oz. New (un-used) $3.95
Pactec
PC-11444-B
Enclosures, instrument case. Black ABS plastic. It's slanted on the side, measuring 7.25" x 5" X 1.5" consists of 4-pieces, top and bottom, each of which have eight small spacers about 3/16" high for mounting printed circuit boards, and two blank end panels for drilling or machining. New (un-used) $7.85
Unmarked
MS-308
Enclosure. Flange mount with lids. Material: plastic, black. Dimensions: 7.5" x 4.5" x 2.25" OD less 0.7" wide flanges with four mounting holes. Metal inserts for mounting front panel. Box has irregular 1" x 1.16" hole for Molex connector or mouse exit and three 0.157" holes in bottom. Un-used but old $4.95
CUSTOM PLASTIC INJECTION
MS-231
Hardware, enclosure. Material: plastic. Dimensions: 2.4" wide x 1" deep x 4.6" high. Has one slot 1.9" x 0.1" in one end, and one  mounting tab with 0.2" hole. Color: black. Complete with lid. Package of 2. New (un-used) $3.00
Polycase Products
EP-8
Enclosure. Project boxes complete with lids. Material: plastic. Dimensions: 4-1/2" x 6" x 2-1/4". Color: black. Note: These boxes are slightly scratched from bulk packaging. New (un-used) $4.95
Hazel
BoxORC1
Enclosure. Tool case with snap lid. Material: vinyl, slightly padded and reinforced. Dimensions: 7 x 4 x 1" deep. Application: For your keepsakes, small tools, replacement parts, etc. Color: black. Un-used but old $1.75
Unmarked
0270062-05
Metal Enclosures 3.107" wide x 2.5" tall x 2" deep ( 2-parts), no side panels. ( ID: 3" x 2.3" x 1.8" ) New (un-used) $18.56
SQUARE D
EK300-1
Electrical interlock kit for 30A switch. 1NO 1NC 1A. Weight: 1 lb. New (un-used) $38.94
Bud Industries
60-2380-WH
19" White RAK Shelf 19" across x 19.25" deep and 0.75" high. New (un-used) $7.50
Unmarked
MS-232
Enclosure. Ribbed box with battery compartment. Material: plastic. Dimensions: 4.9" long x 4.6" wide x 1.3" high with 3 mount feet. Overall 6" wide with feet. Color: black. New (un-used) $1.85
Hoffman
6960B
Enclosure. Heavy duty. Material: steel. NO front panel. Mount: 4-hole wall mounting flange 0.75" wide on each end (4) - 7/8" conduit holes, two on one long side, one at either end. Steel thickness: 0.085". Dimensions: 8" wide x 10.0" high x 4.00" deep. (ID: 7-3/4" x 8-3/4" x 3-7/8" high). Color: gray.  New (un-used) $8.75
Vector
CCA28-84-00
cPCI Subrack and card frame. 6U x 19"W x 10"D. RoHS:Yes. 5 lbs. New (un-used) $169.75
Caravan Protective Cases
CL-412045-2
new SHIPPING CONTAINER with nice black foam inside. OD: 23"w x 20"d x 14"h New (un-used) $89.00
Unmarked
9-756
CD Jewel case, hold 6 cd's. New (un-used) $1.50
Pactec
93708-501-000
Enclosure. For handheld instruments. Material: plastic. Un-used but old $7.50
Comcab
501724
Enclosures. Telephone or computer box. Flush mount 5-1/4" L x 3-1/4" wW x 2-5/16" Tall. Outlet Box. Color: beige. New (un-used) $4.99
Unmarked
9-155
Hardware, enclosure. Standard audio cassette case. Material: plastic. Package of 10. New (un-used) $3.00
Custom
0594
Enclosure. Steel cabinet, 15" long x 12" wide x 4" deep, 0.065". Non-removable hinged steel cover closed with two screws. Heavy cover has one punched slot 1" x 0.47" and has four 1/4" holes in the rear for mounting. Has 2 fuseholder knockouts, 2 D25 holes and 1 MS-conn hole and a general purpose rectangle 1.24"x1.58" area. Weight: 10 lbs.  Un-used but old $19.95
Unmarked
TF-020215
Enclosure. Project box, without lid. Dimensions: 1.85" long x 1.83" wide x 1.46" high. Mounting ears each side. Color: Black. No lids. Un-used but old $1.50
Unmarked
KS300
Transparent plastic cover for 1 phase and 3 phase relays. 06WX8224. More info: http://www.crydom.com/en/Products/Catalog/covers.pdf New (un-used) $1.50
BYRD
MS-288
3" Round enclosure 1.68" thick, great for hiding cameras - SURTEMP Un-used but old $3.98
DAKA-WARE
MS-281
Enclosure. Material: plastic, black. Dimensions: 4" x 4-3/4" x 1-3/4". Note: No lid, no holes. New (un-used) $2.75
Unmarked
MS-244
Enclosure. Two part. Material: plastic. Dimensions: 5.5" x 4.5" x 1.75". Two long mounting holes, small 1.6" wide access slot in rear 0.3" high. Color: black. In Mfr Packaging $2.25
Polycase Products
MS-227
Enclosure. Project boxes, with mount feet. Material: plastic, black. Dimensions: 3" x 4-1/2" x 2-1/4". Un-used but old $4.50
Unmarked
8-817
Enclosures, plastic. Telephone access box with a 50 pin male centronics to (8) 6 pin phone jacks. Un-used but old $3.25
JENSEN
8-069
Hardware, enclosure. Project box with foldable fake 900MHz antenna. Dimensions: 4-1/4" x 4" x 1". Screws on bottom to open. Un-used but old $1.35
HIRSH CO.
TST1 TST2 TRST3 TST4
Switch and outlet box. 12Amp 125VAC 60Hz 3/4HP. Complete with attached 3 Conductor 18" power cord. Dimensions: 5"wide with mounting brackets 2.5" tall and 1.8" deep. Note: CAT No. 6N679. LR48823. Listed CSA. Un-used but old $4.95
Edwards Signaling Products
349
Hardware, enclosure. Weatherproof mounting box only. Back Box. For Edwards Signaling 340 6" or 10" Adaptahorns. Color: gray. More info: http://www.edwards-signals.com/index.cfm?pid=185 In Mfr Packaging $10.00
Cutler-Hammer
ECE09C1AHA
Enclosure. Control box with one CE15CNS3 contactor and one No. 86-5359 A600 switch. Series A1. Contactor and overload assembly are good. Internal pushbutton assembly is broken. Used $50.00
Unmarked
0270062-03
Extruded Aluminum U-channel with cover. 5.2" long x 2" wide x 2.5" deep. The aluminum is 0.068" in thickness. There are no holes or cut-outs except for 2-56 tapped holes in end corners. The covers are natural aluminum, brushed and anodized. The U-channel portions are black anodized. Un-used but old $6.95
Appleton Electric Co
GRC100
GR Type Conduit Outlet Box, Explosionproof, Dust-Ignitionproof, Malleable Iron, Unilet, GRC Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38" Opening, 18 Cubic Inches and (2) 1" Threaded Hubs. For use with Threaded Metal Conduit. Un-used but old $50.00
Hammond Manuf
1414SCA
Enclosure. NEMA 12. Material: steel, gray. Dimensions: 4 x 4 x 3. Junction box. Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. Provides a degree of protection from falling dirt, dust, oil and water. In Mfr Packaging $15.99
Unmarked
MS-283
Hardware, enclosure. Small parts box with lid. Material: plastic, pink. Dimensions: 2-1/8" x 3/4" tall with lids. Please note: These boxes are extremely hard to open after closed without breaking. Package of 10. Un-used but old $5.00
Unmarked
MS-030
Enclosure. With lids. Material: plastic, black. Dimensions: 3.5" long x 2.25" wide x 3.5" high. ID: approximately 2.47" long x 1.92" wide x 3.30" high. Has 4 mounting tabs on bottom. New (un-used) $1.00
Unmarked
9-086
Enclosure, parts cylinder. One cardboard with metal lid 2-1/4" D x 5" high. One all aluminum 1-3/4" D x 4-7/8" high. Note: Containers. New (un-used) $3.00
Unmarked
6-363
Audio. Cassette tape holders. Material: plastic. Package of 10. New (un-used) $2.99
DATA-WARE
7-054-2
Enclosure. Bakelite box. Dimensions: 3-3/4" x 2-5/8" x 1-7/8" ID high. Complete with heatsink lids 3-3/4" x 2-5/8" x 1/2" high.Color: black. Un-used but old $4.95
Bud Industries
AC405
Enclosure, chassis. Dimensions: 7" long x 7" wide x 2" high.  Material: aluminum. Finish: natural. (Note: Without any front panel).  New (un-used) $9.00
Bud Industries
CU463
Enclosure, utility cabinet. Dimensions: 6.25 long x 3.75" wide x 4.25" high (overall height is 4-7/16"). Material: steel. Color: gray. Note: Each side is removable. New (un-used) $17.00
Bud Industries
AC430
Enclosure, chassis. Dimensions: 6" long x 4" wide x 3" high.  Material: aluminum. Finish: natural. (Note: Without any front panel).  New (un-used) $9.00
Bogen
RPK35
Rak panel kit. Used with Models: C10, C20A, CAM, CSM, CFC-1. Material: Metal, gray. Panel dimensions: 19" (48.3cm) x 3-1/2" (22.2cm). Cotout: 11-7/16" (29cm) x 2-29/64" (6.2cm). Side panel depth: 6-13/32" (16.3cm). New (un-used) $45.00
Bud Industries
CU-3012-A
Hardware, enclosure. Combination snap or screw type minibox. Material: Aluminum. Dimensions: 17" long x 5" wide x 4" high. Color: natural. New (un-used) $20.00
Bud Industries
CU-2112-B
Hardware, enclosure. Combination snap or screw type minibox. Material: Aluminum. Dimensions: 17" long x 5" wide x 4" high. Color: light gray. New (un-used) $20.00
Hoffman
A-202006LP
Enclosure. NEMA Type 12 wall mount. Continuous hinge with clamps. Material: mild steel. Body gauge: 16. Dimensions: 20.00" x 20.00" x 6.00" deep (508 x 508 x 152mm). More info: http://www.hoffmanonline.com/stream_document.aspx?rRID=105613&pRID=4379 In Mfr Packaging $325.00
TELEMECANIQUE
XAC-A02
Connector. Pendant control station. Pushbutton enclosure. IEC/EN 60 947-5-1. 500V IP65. ALT P/N: 064504. Telemecanique/Schneider Electric. New (un-used) $124.99
Unmarked
9-021
Enclosure. Front panel has three T1-3/4 LEDS (hidden), red, green and yellow. Also one 2.5mm DC barrel connector and three 6 conductor phone jacks. More parts inside - please refer to photo. Material: plastic. Dimensions: 5" wide x 5-1/4" deep x 1-7/8" high. Has 4 mount feet and has 4 bottom screws for open/close. Color: black. Note: manufacture for Alcohol Monitoring system Inc. New (un-used) $7.50
Pactec
LH64-130
Enclosure. Four (4) piece set. Has a top, bottom, rear and front panel. Separate panel part numbers: Top 71572-01. Bottom 71573-01. Rear and Front 71884-02-028. Military ICN #: 92853-501000. Material: plastic, black. Internal standoffs in bottom and top for PCB-mount. Vertical slots in top about 3/8-inch behind front and back panel slots for vertical PCB's. Top and bottom are held together by two 4 x 1/2" sheet metal screws with bottom access. (screws not included). Dimensions: 6" long x 4-1/4" wide x 1-9/16" high. Very nice. In Mfr Packaging $5.00
85 Results  1 2