Inductors > Ferrite & Toroid Cores



67 Results  1 2  
Mfg. Part # Description Condition Price Buy
VENKEL
FBM0805-102E
Inductor, ferrite beads. Impedence: 1K Ohm. Current: 200mA. DC Resistance: 0.5 Ohm. Package: 0805 SMD. T/R. Package of 100. New (un-used) $5.99
ISKRA FERITI
FP15G100 51-00
Ferrite. Rods. Dimensions: 10mm D x 50.8mm long. New (un-used) $2.25
STACO
829-0080
Universal toroid core, transformer. 50VA, open frame. Primary is 550 turns of #29 enameled copper wire wound around a 2.8" OD 1.5" high, tape wound, iron core. 120VAC Pri windings. PriRes=23-Ohms.  Spec sheet #155 available. Similar to GenRad's old Variac or Superior's Powerstat.  New (un-used) $19.99
VITEC
14Z3261A
Inductor, choke. Package: 8 Dip. Package of 2. New (un-used) $1.00
MICROMETALS
T157-8/90
Toroids. Powdered iron core A-L: 42nH/N2. Package: 40.2mm OD x 24mm ID x 14.7mm thick. Color: yellow with red. From: 240pc / box.   New (un-used) $2.95
RENCO
602920-9A
Inductor, coil. 26uH. Double wound onto a ferrite core, 30 turns #14 magnet wire. Heat-shrunk insulation, two terminals. Dimensions: 0.25" D x 1.25" long. NO-measurable-OHMS. Made for Reliance Electric. Un-used but old $0.50
TDK
H1A P18/11 Z 52H
Ferrite, core. RFI pot core. Dimensions: round 0.708" D (18mm) x 0.207" high. Center hole. Package of 2/set. Cross: 1E82X535. Matching shield available, please call. In Mfr Packaging $1.00
FERROXCUBE
3019PL00-3C8
Ferrite, pot core. Dimensions: 9.4mm D round x 30mm long with center hole. Color: gray. Cross: 1102-00665-028. Package of 2. Un-used but old $3.00
MICROMETALS
T200-26B
Inductors, RF toroids. 92.0 nH/N2. Dimensions: 2.000"/50.8mm OD, 1.250/31.8 ID, 0.550/14.0 height. Magnetic dimensions: 13.0cm, 1.27cm2, 16.4cm3. Color: Yellow/White. More info: http://www.micrometals.com/pcparts/torcore6.html?zoom_highlight=t200-26 New (un-used) $3.50
COILCRAFT
161007-14
Slug-Tuned coil forms. Stands 7/8" Off PC board 1/4" diameter with 3/16" diameter adjustable powdered iron core. Package of 25. In Mfr Packaging $5.99
Unmarked
2D10-55115-A2-2
Toroid Core 3/8" x 1/4" No other info avail. New (un-used) $3.18
Bourns
PM127SH-6R1N-RC
Inductors, ferrite. Inductance: 6.1uH. Maximum Current: 6.6Amp. Tolerance: +40, -20%. Series: PM127SH. DC resistance: 0.018-ohm. Package: SMD. Dimensions: 0.48"square x 0.3"H. JW Miller Magnetics. New (un-used) $1.00
MAGNETICS / SPANG
0F-45528-EC
High quality large ferrite "E" Inductance: AL value 8220nH (+/-25%) @10kHz Eff.:353Ae Sq mm - Ve 44,000 mm-cubed - Core Loss Pi max: 205mW/cm3 (9W/set)@25kHz 299mT 100C - EC, ER, ETD and EER shapes are a cross between E cores and pot cores. 54.8mm wide x 20.8mm deep x 28.2mm tall. http://specs.mag-inc.com/Ferrite/0F-45528-EC.pdf In Mfr Packaging $6.95
Steward Ferrites
39G3449
Inductor, core. OD: 22.1mm, ID: 13.5mm x 6.3mm thick. Color: grey. Un-used but old $0.99
FAIR-RITE
0443164051
Filters, ferrite. Ribbon cable line filters. Split bead and housing assemblies. Dimensions: 2.5" wide x 1.11" x 0.65" when closed. Heavy duty. More info: http://www.fair-rite.com New (un-used) $5.00
Unmarked
MS-011
Inductor, ferrite. Core. Dimensions: Round 0.504" (12.8mm) D x 0.185" (4.7mm) wide (0.093" / 2.3mm thick), with an ID of 0.315" (8.0mm). Package of 10. New (un-used) $3.00
9-319 TOROID #12 WIRE WOUND ON A 1.5" SQUARE x 1"THICK COIL FORM. Removed from equipment $2.48
PREM
855A03
Inductor, coil. Tuneable, with dial. Mount: 3 Pin PCB. Dimensions: Overall 7/8" x 7/8"  x 1-3/16" high. Un-used but old $1.00
FERROXCUBE
K3000 62 3B3
FERRITE 1" OD POT CORE - Set of Two - New Each 0.315"high Un-used but old $1.50
TDK
H7C1PQ2020Z
TDK PQ2020 Ferrite Pot Cores for switching mode power supplies driven at high freq's. 20mm long x 14mm wide x 10mm high Min Purchase 2-sets, 4/$1.00 Un-used but old $0.50
Unmarked
4-202
Universal toroid core, transformer. Multi-tap turn toroid core. Overall 60.3mm (2.376") D round x 22.6mm (0.892") thick with 3-1/2" 3 varnished leads each about 0.033 and 0.040 = 6 leads. New (un-used) $4.95
PULSE ENGINEERING
PE-53119
Inductor, coils. 680uH 1.3Amp. Tolerance: 20%. Package: KM-5.0  - Inductor code: H470. Dimensions: 1.3" long x 0.70" wide x 1.40" high. Mount: PCB. More info: http://ww2.pulseeng.com/products/datasheets/P596.pdf In Mfr Packaging $8.99
FAIR-RITE
2643801502
Inductors, coils. Cable EMI suppression cores, ferrite, broadband frequencies 25-300 MHz. Dimensions: Round 25.4mm OD x 6.35mm thick with an ID of 12.7mm. More info: www.fair-rite.com New (un-used) $2.00
Panasonic
EXC-ML20A390U
BEAD CORE 4A 100Mhz 0805 SMD PKG NEW TAPED OFF REELS FERRITE FILTERS MIN PURCHASE 3/$1.00 In Mfr Packaging $0.34
Unmarked
P42625
FERRITE RFI POT CORE 1.082 X 0.745 X 0.49" H New (un-used) $0.95
Unmarked
5-277
Ferrite Toroid Core 5/8" x 1/4" Un-used but old $1.00
Unmarked
2208-3299 ELMACOH
Toroid, core. 33mHy. Dimensions: 1" OD, 0.45" ID x 0.21" thick with (2) 1.6" long leads. Un-used but old $1.95
Gowanda
050AT5002HLF
Inductor, coil. 50uH 3.93Amp. Resistance DCR: 0.035 Ohm. Mount: PCB. Dimensions: 15.6mm D x 7.5mm high. Lead spacing: 15.0mm. Note: Toroidal power inductor chokes. New (un-used) $5.99
J.W.MILLER
5256-RC
Inductor, choke. 500uH 2Amp. RF Hash. Ferrite. Tolerance: 20%. Package: axial leads. Dimensions: 12.7mm D x 31.8mm long. Lead free. Rohs compliant. New (un-used) $1.00
J.W.MILLER
5254-RC
Inductor, choke. 250uH 2Amp. RF Hash. Ferrite. Tolerance: 20%. Package: axial leads. Dimensions: 10.3mm D x 31.8mm long. Lead free. Rohs compliant. New (un-used) $1.00
Lodestone Pacific
VTM100-4
Inductor, holder. Mount/cradle. Mount: PCB 4 Pin, vertical. Dimensions: 3/4" x 13/32" x 13/32". Color: white. New (un-used) $0.50
MAGNETICS / SPANG
0R44949-EC
Inductor, ferrite. "E". Dimensions: 0.986" (25mm) wide x 0.649" (16.5mm) deep x 1.916" (48.6mm) high. Top of ferrite and lower sections are only 0.306" (7.7mm) high. Each with an inside curve toward the center. Center scection of ferrite is round 0.653" (16.5mm) D. Note: Sold one @ $4.00 USD. In Mfr Packaging $4.00
POLARA
90-123-203
Inductor. Package: 4 pin SMD. In Mfr Packaging $0.89
COILCRAFT
0805LS-153XGLC
Inductor, ferrite. 15uH @ 2.5MHZ, 0.18Amp. Tolerance: 2%. Package: 0805 SMD. Rohs compliant. Package of 10. In Mfr Packaging $4.00
COILCRAFT
DO1605T-103MLC
Inductor, ferrite. 10uH 0.9Amp. DCR:0.27 Ohm. Package: SMD, low profile, 1.8mm high. Rohs compliant. Package of 10. In Mfr Packaging $4.99
TDK
MLF2012C101K
Inductor, ferrite. 100uH 2mA. Tolerance: 10%. Shielded. Q @ Freq 25 @ 1MHz. Frequency - Self Resonant: 12MHz. DCR: 3.1 Ohm. Package: SMD 0805 (2012 Metric). Lead free. Rohs compliant. Package of 20. In Mfr Packaging $3.00
COILCRAFT
LPO6013-103KLC
Inductor, ferrite. Inductance: 10uH. Current: 1Amp. Tolerance: 20%. DCR: 0.30 Ohm. Package: SMD. Dimensions: only 1.3 mm high. Rohs compliant. In Mfr Packaging $0.59
COILCRAFT
LPS4018-153MLC
Inductor, ferrite. Inductance: 15uH. Tolerance: 20%. DCR: 0.26 Ohm. Shielded. Package: SMD, 4.0 × 4.0 mm footprint; less than 1.8 mm tall. More info: http://www.coilcraft.com/pdf_viewer/showpdf.cfm?f=pdf_store:lps4018.pdf In Mfr Packaging $0.59
COOPER
UP4B-330
Inductor, ferrite core. Inductance: 33uH. Current: 3.7 Amp. Tolerance: 20%. Package: SMD. From: Manufactures T/R. Rohs compliant. In Mfr Packaging $2.00
COOPER
UP4B-150
Inductor, ferrite core. Inductance: 15uH. Current: 3.7 Amp. Tolerance: 20%. Package: SMD. From: Manufactures T/R. Rohs compliant. In Mfr Packaging $2.00
FAIR-RITE
2643540002
Inductor, ferrite. Cylindrical. Impedance: 255 Ohm. Ferrite grade: 43. Frequency range: 25MHz to 300MHz. Ferrite mounting: tubular. Mounting type: SMD. External diameter: 14.3mm. Internal diameter: 0.25".  Outer diameter: 14.3mm. RoHS Compliant. In Mfr Packaging $1.00
Murata Erie
PLA10AN3021R3R2B
Inductors, coils. EMI Filter (3.0mH) 3000uH 1.3A, unshielded. Maximum DC Current: 10.3 Amp. Operating Temperature Range: - 25 C to + 120 C. Termination Style: SMT. Rohs compliant. More info: http://search.murata.co.jp/Ceramy/image/img/PDF/ENG/L0135S0205PLA10_N.pdf In Mfr Packaging $1.00
PULSE ENGINEERING
PE-54036S
Inductors. 168uH 1.81Amp 20%. Power wirewound toroid. Dimensions: 21.21mm long x  11.56mm deep x 24.13mm high. More info: http://ww2.pulseeng.com/products/datasheets/SPM2006_44.pdf In Mfr Packaging $4.99
Murata Products
BLM21P221SGPT
EMI Suppression Filters. Chip ferrite bead. Impedance: 220 Ohm at 100MHz. Package: SMD 0805. Note: Manufactures 7" reel is double marked BLM21P221SGPTM00-03. Package of 25. In Mfr Packaging $3.00
MICROMETALS
T106-0
Inductors, RF toroids. Iron powder cores. Dimensions: 1.075" OD x 0.455" high, with 0.558" ID and 0.260" thick walls. In Mfr Packaging $4.99
MICROMETALS
T130-0
Inductors, RF toroids. Iron powder cores.  In Mfr Packaging $4.99
FAIR-RITE
2643804502/B1
Inductors, ferrite. Round cable EMI suppression core. Grade: 43. Frequency: 100MHZ. Impedance: 100 Ohm. Outer diameter: 31.1mm. Inner diameter: 0.75". Package: tubular. Mount: SMD. Rohs compliant. More info: http://www.fair-rite.com Reseach 2643804502. Un-used but old $1.00
Philips
4330 032 2205
Inductor. Designer's sample Box. Full of hundreds of types (and shapes) of chokes and coils. EMI Suppression. Wired and SMD Ferrite. Looks new and full. Sample box 5. New (un-used) $40.00
MICROMETALS
T520-28D
Inductor, ferrite. Toroidal core, AL nH/N2 :90.0 Dimensions: 5.2" OD, 3.080" ID x 1.6" high. Color: Gray/Green.   In Mfr Packaging $24.89
DM Steward
STE28S0670-000
Ferrite. Dimensions: 0.67" wide x 0.59" deep x 0.117" tall. Has two rounded edges on opposite side which are 0.095" wide x 0.59" deep x 0.13" tall. In Mfr Packaging $0.25
67 Results  1 2