|
|
Lonero Engineering Co
61ZE1227-525-D5
|
Rollers, 14mmD. Work rollers, material: CPM REX 76. Tips 4.4mm thick with 3.0mm flat top. Lonero Engineering - Deep Rolling Tool Specialists.
|
Un-used but old
|
$4.95
|
|
|
|
NIKKEN
CAT50-C1-1/4H-105U
|
Chuck, milling. Ultra-Lock. CNC. Capacity: 0.187-1.250". Shank: CAT 50. Collett: KM 1-1/4. 10.25"L overall. With (1) 1 3/4" end mill. Weighs 12 lbs unpacked.
|
Used
|
$274.88
|
|
|
|
VALENITE
VPBPC6-PC3R3
|
Milling Tool Holder 18mm bore, 36mm SHANK, 18mm Bore. 5-1/4" Overall Length. Arbor.
|
New (un-used)
|
$169.88
|
|
|
|
FETTE
E10A01X106
|
Massive 9.45 pound Fixture on 1" steel shaft 2.3" long.3.94" diameter x 4.2" high excluding shaft. Marked: FETTE Nr E 10-177 (Adjustable 0 - 8 units, about 1.5") attached by three 0.63"dia rods to the best part: E 10A01 X106 M8-M10 3/8 Feingewinde 8-14mm 5/16 - 9/16. Made in Germany - Impressive! with various small tools, allen wrenches, etc.
|
Good
|
$335.00
|
|
|
|
Winter
5UZ71P-100-39 PD-1119-18NC
|
Reverse-Plated 25-mesh Rotary Diamond Dresser - 4" Precision Full-Bullnose Diamond Grinding Wheel, Roller Dresser 2.02"-ID 1.7"wide - with spec sheet, profile-print-out from the factory in W Germany. In it's own tongue and groove wooden Treasure Chest - WINTER USA - Was listed as NEW but DR says slightly used -=- uses FLOOD COOLANT -=- NON-DASH SEGMENTED
|
Good
|
$498.89
|
|
|
|
Stelron Components
DS5-3-C
|
Slide, linear. Anti-friction, double bar. 3" travel. Ball-bearings, hardened & ground steel dual shafts. 3 x 3.25 x 1". Thick black anodized housing and end plates. Size: 180mmL x 77mmW x 25.5mmH overall. Weighs 33-oz before packing.
|
Used
|
$88.95
|
|
|
|
LANE PUNCH CORP
BRHT-13
|
Ball-Lock Retainer Heavy-Duty (BRHD) Tru-Lock TM Conforms to NAAMS-ISO. Triangular nitride treated. Simple typical mounting: 1. Drill and tap for two (2) screws. 2. Drill and ream (or bore) for dowels. 3. Insert dowels into die plate, slip retainer onto dowels and tighten screws. 50x48mm x 41mm-high provide their user improved performance. Feature positive lock to retainer. Reduce maintenance and downtime. Prevent stripper from falling into die during use. Fit both Ball-Lock and Shoulder punches.
|
New (un-used)
|
$55.88
|
|
|
|
Unmarked
H100
|
Motor brush. Dimensions: 0.623" (15.8mm) long x 0.383" (9.7mm) deep x 0.750" (19.0mm) high.
|
New (un-used)
|
$13.00
|
|
|
|
NIKKEN
CAT50-MMC8-105U
|
Coolant Mini-Mini Chuck, VMK08. Cat 50 shank type, 9-3/4" overall length. Used.
|
Used
|
$50.00
|
|
|
|
MARPOSS
M1 Electron
|
M1 ELECTRON Standard Plug Body 15-36mm. Electronic manual bore gauge with full-bridge (LVDT) transducer for checking inside diameter of blind and thru bores. Range: 15-36mm. The measurement value can be displayed on the TESTAR E18, E4, E4N and, through the Gage Box™ data acquisition system, on the E9066s™ Industrial PC. Repeatability: <1 µm. Measuring force: 50 gr ±35%.Connector type: Lumberg S3 (DIN 41524) or SV50/6 (DIN 45322) with 1.8m cable.
|
New (un-used)
|
$397.88
|
|
|
|
Yokota
YD-400SC
|
Pneumatic Air
Driver - adjustable torque. 1700-RPM
0.5MPa. Appears new, in box with
chuck key and air fitting. 5mm Hex drive 1/8" NPT. With Japanese instruction manual.
|
Good
|
$175.00
|
|
|
|
VALENTITE
M1015284
|
END MILL ADAPTER HSK100,25mm - BEAUTIFUL, SEE PHOTOS
|
New (un-used)
|
$0.00
|
|
|
|
Lonero Engineering Co
61ZE1227-525-D6
|
20 x 11.9 x 8.9mm Beautiful gold color Ampco material, tooled just two years ago . . .
|
New (un-used)
|
$9.95
|
|
|
|
Cooper Tools
511395
|
Wire Wrap
tool/insert - just over 3" long.
|
In Mfr Packaging
|
$25.00
|
|
|
|
Cooper Tools
508824
|
Tools, Cam.
Wire-wrap.
|
New (un-used)
|
$34.85
|
|
|
|
Cooper Tools
507502
|
30 AGW, MOD, 25
MIN, Wire Wrap Bit
|
New (un-used)
|
$25.00
|
|