|
|
Von Weise Gear Co
VW10-30
|
Type RB Frame X48Y Motor ref# 48-52431-01 1/4HP 1725RPM 60Cy 230V 2.5A Continuous Duty - 40degC AA F17 Code:M SERV.F.1.35 APPROX 6" diameter x 12" long including 0.75" keyed shaft 1.5"Long - Has Nice mounting bracket 8.5" x 3.75" with Four mounting holes. Nice Motor.
|
Un-used but old
|
$147.88
|
|
|
|
TRW/Globe
CMC144A152 P-21F345
|
Motor, AC. 1PH 38-46VAC 60Hz, 3600RPM. Hysteresis synchronous with capacitor, 12uF included. 3 wire leads, teflon, 14" long. Dimensions: 30mm D x 74mm long, including shaft. With 7.5mm D gear. Mounts on 2 threaded holes 21.7mm centers. New. Note: Western Electric P/N: P-21F345. Made in the USA.
|
New (un-used)
|
$14.38
|
|
|
|
JAPAN SERVO
KS7P8-11 p/n6813649
|
Motor, AC geared. Synchronous 25V 50/60Hz 250/300RPM. Requires 20µF capacitor (included). On a 2.78" square plate with 4 mounting holes 2.2" apart. Shaft: 1/4"shaft x 0.6" long and has a gear 0.49" D. Motor is 1.6" behind plate. Maybe replaced with p/n 6813649.
|
Un-used but old
|
$12.48
|
|
|
|
JAPAN SERVO
127PS1176 U129A-119
|
20 RPM motors 115VAC 0.7A 8µf Capacitor required, included.
Duty =2.5 Sec. ON/60S OFF, Type U129A-119- MFG P/N 060485
5 watts out has thermal cutout which will cutout motor if ran for 1-1-1/2 min.
|
Un-used but old
|
$17.95
|
|
|
|
Oriental Motors
4GN180KA
|
Gear Head for GN-type Pinion Parallel-shaft motor [not included]. Ratio 180:1 Dimensions: 3.15" [80mm ] square, ball-bearing.
|
New (un-used)
|
$99.00
|
|
|
|
Superior Electric Co
SS50-1292U
|
Motors, AC geared. 120V/60/0.5Amp. 6RPM. Requires capacitor for start or run. Heavy duty, 3 wire. Motor is 3.35" D, assembly is 5" tall x 7-1/2" long x 5-1/2" wide with 4 mounting slots. Output is 1.15"[30mm] D on a 3/8" flatted shaft. Note: Reversible slo-syn. Requires a 250 Ohm 25 watt resistor and an 8uF 230VAC capacitor.
|
Used
|
$25.00
|
|
|
|
HURST
3002-030
|
MODEL A 115V 50Hz 20 RPM 2.3 Oz-In REVERSIBLE PM SYNCHRONOUS INSTRUMENT GRADE MOTOR 115VAC 50 Hz. 2.5W Requires 0.25uF capacitor (and SPDT Switch) between Red and Black, 115/50Hz to Red and Blue CW, Black & Blue CCW. Drop-in replacement for pear-shaped gear cup motors. Die cast gear housing.
|
Un-used but old
|
$39.95
|
|
|
|
Barber Coleman
MZOJ14142-2
|
Motors, AC geared. 115VAC 180RPM 2.9-IN-LBS, 20:1 reduction gear box with fan blade - HI Torque 60HZ, 2 lbs. See additional fan blades for this motor P/N 5-393. Note: Must be intermittent duty. Possibly 60% duty cycle. After running for one hour becomes too hot to touch.
|
Un-used but old
|
$6.99
|
|
|
|
Oriental Motors
2GN18KA
|
GEAR HEAD for ORIENTAL MOTORS GN-series 18:1 New, in box with screws
|
New (un-used)
|
$45.00
|
|
|
|
Oriental Motors
3IK15RGN-AUL
|
Motor, AC. 115VAC 60HZ 0.46Amp 4P, 15watt thermally protected. Shaft is approx 1/2" long spiral cut shaft 0.222" OD. Shaft has a 0.58" pulley, not shown in our picture. Capacitor 4uF required, not included. Weight: 2.3 lb. Used/Removed from equipment.
|
Removed from equipment
|
$25.00
|
|
|
|
Emerson
P37NNA156143
|
Motor, AC. Supply: 440VAC 60Hz. N/P Current: 3PH 0.6Amp. Speed: 26 RPM. Torque: 180. Horsepower: 1/12HP. Note: Frame 3275, Class A, MFG NO A, E49286, 105.974-1. Gearmaster. Gearcase-motor. Note: Military NSN 6105-01-067-6701.
|
In Mfr Packaging
|
$399.00
|
|
|
|
Bodine Electric Co
42R5BFCI-E3
|
Motor, AC. Supply: 220/240V 1 Phase HZ:50~ RATIO:30:1.
|
Removed from equipment
|
$100.00
|
|