Motors > Servomotors



25 Results  1  
Mfg. Part # Description Condition Price Buy
SANYO DENKI
P60B13200LCX2C
BL Super SERVO MOTOR 3.1KW 3,000-RPM 0.40" [10mm] dia mounting holes on 4.55" [115mm] centers. 135mm square face about 193mm long including 8.9mm dia shaft for encoder - Available With or WithOut encoder. 19.5mm dia knurled shaft 45mm long. Weighs 25-pounds without encoder or packaging. Removed from equipment $899.00
EDA
BLM6210-4
Motor, Servo. Supply: 460V. Speed: 3000RPM. Torque: Stall Cont: 13.6 Reg Amp 210-Lb-In.  Stall Peak: 23 Reg Amp 390-Lb-In.  K-B: 114V/KRPM.. Note: Brushless 150Hz. Class:55C  Ser 96L624E-97  Large Black motor  with Pulley - Excellent condition. Used $1,444.00
Gould
M33Y-SNRY-Y004-1B
24V 10HP 195 Lb-In PERM-MAGNET SERVO MOTOR Slightly Used but appears in good condition - Brushless Resolver type Feedback - this motor was probably rated to 3,000 RPM using a 250V 20A drive - Motor Dia is 7-inches x 12" long - Shaft is 1.25"keyed and 2-11/32"long - BACK EMF Ke 70.4V/KRPM - TORQUE CONSTANT Kt 10.3 Lb-In/Amp - 16.2Amp STALL CURRENT - Connection Diagram 497-302-0077 - Outline Dwg 497-206-0097 Good $497.50
Advanced Digital
SS604A
Servo Motor Amplifier, including TB506 25-pin controller, TB504 15-pin encoder feedback, TB505 9-pin programming port, TB502 15-pin controller I/O, TB501 5-pin power I/O connectors. This has the wiring connections for TB501 and TB506. Instrument marked 4 Amps continuous. Advanced Digital. New (un-used) $375.88
MPM892BSG6JY1N Motor, Servo. Supply: 230V 3-Phase. Current: 2.6A-rms/Phase Rating: Intermittant 3Ph, S9, Class F. Speed: 3,000 RPM max. HP: 1.05. Wire count: 2 MS connectors. Body Dimensions: 3.35"square x 10"L . Shaft: 0.50"D keyed shaft 1.1"L.  10 lbs. Note: EN60034-1; IEC 664-1(1992)  MTS AUTOMATION Made in Germany by Antriebstechnik GmbH. Un-used but old $375.00
KG - Japan
TS3327NE11
2.28"d x 6.5"L 0.388"/9.8mm spline shaft 0.45"L New with long cable to 10-pin Male circular connector and mating panel mount SRON2A21-10S socket. 3.67-pounds Mounts with two threaded holes 0.192"ID 2.35"spacing. New (un-used) $175.00
KG - Japan
TS3325NE14
60W 1.14kg 1.66"OD x 4.5"L plus 8mm 0.315" splined Shaft 0.5"Long Has two 33" long cables to a 10-pin connector With mating receptacle, new. weighs 1.7pounds Un-used but old $125.88
KG - Japan
TS3326NE14
135W AC Servo Torque 3.3kg-cm 2.27"D x 4.9"L plus 0.40"D splined shaft 0.6"L Mounts with two threaded holes 2.325" 60mm spacing. Has two 33" cables terminating in a 10-pin Male plug, with mating 10-pin panel mount receptacle, new - probably spares for a machine. weighs 2.8 pounds Un-used but old $195.00
SANYO DENKI
45BM007HBC90
Motor, Servo. Speed: 3000 RPM. HP: 0.2kW. Wire count: Two cables to motor, 2-cond and 4-conductor. Mech. Mtg.: 4-hole mount 2.5"spacing. Shaft Dimensions: 0.46" / 11.6mm keyed shaft 1"L, with key. Weight: 9 lbs. Note: Servo Motor with holding brake and Encoder. Long flexible rubber cable with 16-pin Honda M connector from MRE-256SP052FSS Encoder.. New (un-used) $374.95
Cleveland Motion Controls
MT3515-307CG60
86mm dia x 188mm long including 9.6mm flattened shaft. Mounted on aluminum block 89mm x 114mm. 4-pin connector on short cable. No other info availablke from us. Used $159.79
GLENTEK INC
GM3320
Motor, servo. PM DC. 120 In-Oz Torque, 4Amps, 2.1 Ohm, 4mH Inductance. BEMF 22V/1000RPM. Max speed 3,000-RPM.  Tach 7V/1000RPM, JA-LB-SecxSec: 0.0020. Dimensions: 83mm D, 92mm with brush holders x 190mm plus 38mm long, 13mm keyed shaft. Has a 14-pin male connector with tarnished pins. Un-used but old $488.69
ASSL / AEG
MS43E-11C0-000
PM AC Servo Motor S1-1.9Kwatt 330V 9.1Amp 6000-RPM 4.5" square x 1.75"L Sensor - Resolver Brake 12 Nm 24V 0.75Amp S/N 97/12225 Manuf in Ireland 0.75" keyed shaft 1.5" long 8-pin and 12-pin Male connectors. heavy duty. Used $195.00
Compumotor Corp
71-013329-01
Motor, servo. 3PH brushless. With 10 Tach, 10 wire ([5-used]  6-teflon wire). Dimensions: 58mm square x 120mm long, 6.4mm shaft 17mm long. Mount: 4-holes 47mm centers. Weight: 2.4 lbs. Used $125.00
SANYO DENKI
45BM003HBC90
Motor, servo. Speed: 3000 RPM. HP: 0.08kW. Wire count: Two cables to motor, 2-cond and 4-conductor. Mech. Mtg.: 4-hole mount 1.66"spacing, motor is 2.14"D x 10"L plus shaft.  Shaft Dimensions: 0.27" / 6.9mm keyed shaft 0.8"L.  Weight: 7 lbs. Note: Servo Motor with holding brake and Encoder. Long flexible rubber cable with 16-pin Honda M connector from Sanyo/NSO MRE-256SP052FSS Encoder.  TMMK06788. Used $274.95
Superior Electric Co
131852-003
Slo-Syn Inertial Flywheel. Dimensions: 3.99" D x 1.78" deep. For 0.35" shaft. Weight: 3.918 lbs. New (un-used) $95.00
KG - Japan
TS3324N E14
Motor, servo. AC. 40 Watt. Torque:1-kg/cm, 8-mm spline shaft. Dimensions: 43mm D x 106mm long, including shaft. Mounts with two threaded holes 47mm apart with 32" cables and plug to mate with JAE SRCN2A21-10S, included. New. New (un-used) $95.88
Allen Bradley - AB
155286
Motor, servo AC. Output: 1 KV at 40 Deg C. Stall torque: 2.72/24 Nm / LB IN 40 Deg C. RMS Amperes: 2.44 at 40 Deg C. 5000 RPM at 40 Deg C. Resistance: 15.570 Ohm at 25 Deg C.  Cat No: 1326AB-B410G-21. Removed from equipment $900.00
Compumotor Corp
A/AX83-93
Servo Motor. Nema size 34, static torque 260 oz-in (N-m 1.85). Dual shaft. Removed from equipment $60.00
Lenze/SimpleServo
520-20-210
Motor, servo with encoder. 900 Watt, 7.5 in -lb @ 5 Amps. 6000 RPM @ 240 VAC in. Encloder: 1000 PPR quad. Manufacture code 000345-0112. Complete with cables. Manufacture: Simple Servo. More info: www.simpleservo.com Used/excellent condition. Used $0.00
CONTROL TECHNIQUES WORLDWIDE
75DSD040300
Motor, servo. 380-460 V  3000RPM 1.6A   STALL TORQUE 4.0Nm  STALL CURRENT 2.50A. Used $300.00
HAROWE SERVO CONTROLS
11BRCT-300-P-58D
Motor, servo. Harosyn 5 speed, 2500Hz. Rotor: 1 phase (output) 4.68V. Stator: 2 phase (input) 12V 1.4mA. 6-wire leads. Size: 1.0"D x 1.65"L plus shaft with flat 0.12"D x 0.3"L. Reliable in harsh environments, brushless construction. Ideal mate for brushless servo motors, excellent angular accuracy & repeatability. New (un-used) $444.99
CONTROL TECHNIQUE INC
DXM4120WB
Motor, servo. Supply: 240V 16A 3-Phase Brushless. Speed: 3000 RPM. HP: 4.25.  Wire count: internal connections. 960129-11A4  Class: F. UL-E171950. Used. Used $2,900.00
Emerson
DXE340C
Motor, Servo. Supply: 240V 3-Phase Brushless. Current: 4.0A. Speed: 4.000 RPM 0.57kW. 0.76 HP. Wire count: Two MS connectors. Mech. Mtg.: 4-hole 0.22"ID 2.74"spacing. Body Dimensions: 3.324" square x 7.36"L plus keyed shaft. 8 lbs New (un-used) $3,900.00
Elwood Getty High Performance
121-087-201
Motor, servo. 4HP PM AC. 3PH 230V18.6A 3.06kW, 2500-RPM, 4000-max. Stall: 164.6-Lb-In. Brake Stall: 175-Lb-In. IP66  TENV. Elwood Getty High Performance Motors. Dimensions: 6"sq x 19" long. Has a one-inch round shaft 2" long. Insul:H E147863  L:L Res 0.23-Ohm 40C. Un-used but old $995.88
Compumotor Corp
CPLX67-120
Motors, servo. Dual shaft. Mounted on a plate, has a bit of white "stuff" on it . Dimensions: 6.75" long, motor is 2.25" D. Sold as is. Condition unknown $75.00
25 Results  1