|
|
AIRPAX
L82401-P2
|
Motor, stepper. 12VDC 52 ohm. 7.5 deg/step. 6 wires. Mounting: 1-3/8" hole spacing. Body: 42mm D. Shaft: 2.9mm D x 9.6mm L. Weight: 4.8 oz.
|
NS
|
$9.95
|
|
|
|
PORTESCAP
GC26M048A30V
|
Motor, stepper. Ratio: 10:1. 5V . 6 wires. Mounting: 1-3/16" hole spacing. Body: 1.1" x 1.43 x 1". Shaft: 3mm D knurled shaft 7.5mm L. DANAHER / PORTESCAP.
|
NEW
|
$14.95
|
|
|
|
SUPERIOR ELECTRIC CO.
M093-LS-102
|
Motor, Stepper. Supply: 2.64VDC 5.5A. Steps: 200 steps per rev. Direction: Reversable. Wire count: 6-wire leads. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 5.25"L plus 0.38" round shaft 1.1"L. BM101025. Weight: 8 lbs. Note: New, in boxes.
|
NEW
|
$225.00
|
|
|
|
SEIKO EPSON
STP-42NI48LH
|
Motor, stepper. 12V 50 ohm. 6 wires. Body: 42mm D. Shaft: 2.9mm D x 9.0mm L. Weight: 4.2 oz.
|
NS
|
$5.95
|
|
|
|
SEIKO EPSON
EM462
|
Motor, stepper. 4 wires. Mounting: 1.96" hole spacing. Body: 1.65"D x 1"L. Shaft: 8mm D gear. Weight: 4.2 oz. 11" long ribbon cable.
|
FN
|
$2.48
|
|
|
|
AIRPAX
A82454-M3
|
5V STEPPER 0-400RPM 0-320PPS 1.125 deg/step 3.5W Four 15-Ohm coils 6-leads Rotation Reversable 2.12" x 2.75" x 1.4" with gear attached to 1/8" shaft - 2 mounting holes 2.38"apart 7oz
|
NOS
|
$6.95
|
|
|
|
SUPERIOR ELECTRIC CO.
MP70-9A-Z9-9Z-017
|
Motor, stepper. 5VDC 1.5A . 48 step/rev. 8 wires. Mounting: 2.28" hole spacing. Body: 2-3/4" D x 1.7" L. Shaft: 1/4" D x .6" L w/ flat. Weight: 23 oz. High torque.
|
NS
|
$15.95
|
|
|
|
AIRPAX
82227/B82359
|
Motor, stepper. 12VDC 2 phase 37 ohm. 48 step/rev. 1800 steps/sec. 4 wires. Mounting: 1.65" hole spacing. Body: 1.38 D x 3/8" L. Shaft: 15-tooth 1/4" D nylon gear. Weight: 2.6 oz.
|
OLD
|
$2.95
|
|
|
|
SUPERIOR ELECTRIC CO.
MP70-1A-A4-9Z-025
|
Motor, stepper. 15V 4 phase .49A . 48 step/rev. 8 wires. Mounting: 2.2" hole spacing. Body: 70.5mm sq x 46mm L. Shaft: 1/4" D x .63" L. Weight: 22 oz.
|
NS
|
$12.95
|
|
|
|
APPLIED MOTION PRODUCTS INC
4017-838
|
Motor, stepper. 12V 4 phase 0.16A . 3.6 deg/step. 5 wires. Mounting: 2.44" slot spacing. Body: 42mm sq x 33mm deep. Shaft: 3/16" D x .5" L. Weight: 9.7 oz. MPI spec #77619324.
|
NS
|
$8.99
|
|
|
|
SUPERIOR ELECTRIC CO.
KMT091F05E
|
Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversable. Wire count: Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Two-phase, single stack. Weight: 5 lbs. Warner Electric / Superior
|
NEW
|
$195.00
|
|
|
|
SUPERIOR ELECTRIC CO.
M093-FF-206
|
Motor, stepper. Synchronous, bipolar. Supply: 3.85V 4.0A. Steps: 200 steps per rev. Torque: 550 Oz-In Hold. Direction: Reversable. Wire count: 4-wire leads. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.38"D, 3.25"square x 5.2" plus 0.38" keyed shaft with flat. Note: 8 lbs. Used as demo, excellent condition.
|
USED
|
$289.88
|
|
|
|
SUPERIOR ELECTRIC CO.
PDT500-1001
|
SLO-SYN Positioning System. Stepper motor Drive combined with a Micro-series Indexer. New, in box with manual.
|
NEW
|
$495.00
|
|
|
|
COLECO ADAM
55SI-25DAWC
|
Motor, stepper. 36 ohm. 7.5 deg/step. 6 wires. Mounting: 2-5/8" hole spacing. Body: 55mm D body in a 60 x 77 x 23mm heatsink. Shaft: 1/4" D w/ flat. Weight: 11 oz. Stepper-in-a-heatsink for Adam Computer Printer.
|
NOS
|
$5.99
|
|
|
|
AIRPAX
L82101-P2
|
Motor, stepper. 12V 118 ohm. 15 deg/step. 6 wires. Mounting: 1-3/8" hole spacing. Body: 1"D x 1/2"L. Shaft: 1.7mm D x 8.7mm L. Weight: 1 oz.
|
NOS
|
$9.00
|
|
|
|
17PS-C054-01
|
Motor, stepper. Supply: 12VDC. 2-Phase 4-wire. Winding Res: 4-wire 30-ohms/winding. Steps: 14.4degrees / step. Direction: reversible. Wire count: 4 wire. Mech. Mtg: 4 4/40 studs on front. Body Dimensions: 1.66" square x 1.3". Shaft: 0.20"D x 0.55"L. 0.5 lb.
|
NS
|
$19.95
|
|
|
|
LEDEX
5945-636-5462
|
Motor, stepper with switch. Supply: 48VDC. Body Dimensions: 1.90"D x 2.74"H. Weight: 12oz. With wafer switch. Military NL-71277-3-2, B-61986-A
|
FN
|
$13.75
|
|
|
|
KML092F13
|
Motor, Slo-Syn stepper. Supply: 1.74VDC. N/P Current: 6.5A. Steps: 200 steps/revolution. Direction: reversible. Wire count: 4-wire leads. Frame Size: NEMA 34. Mech. Mtg: 4-hole. Body Dimensions: 3.67"square x 3.8"L. Shaft: 0.50" flatted shaft 1"L. 2-stack . 6.5 lbs. unpacked. Weight: 8 lbs.
|
NS
|
$295.00
|
|
|
|
SUPERIOR ELECTRIC CO.
215851-007
|
I/O Cable for Slo-Syn motors. BCD I/O cable, 25 pin D, 5 foot (1.5 meters).
|
FN
|
$34.95
|
|
|
|
SUPERIOR ELECTRIC CO.
215851-008
|
Cords & Plug sets. For Slo-Syn motors. I/O Cable for Slo-Syn motors. BCD I/O cable, 25 pin D, 10 foot (3 meters).
|
FN
|
$29.95
|
|
|
1 2 3 4 5
|