|
|
Pepperl & Fuchs
US-335211
|
Pressure Relief Vent. Purge control for use in hazardous locations. NFPA 496-1993 4S11. Maximum enclosure volume 75 Cu.Ft. "Relief vent has a spark arrestor screen for ..."
|
New (un-used)
|
$74.95
|
|
|
|
REXROTH Pneumatic
561 010 508 0
|
5460289652 RG535B V3.01 4699 And 5460289672 PMRG21 V8.05 4699 Max .P(1)=7.5bar Aluminum block about 4.7 x 6.5 x 6.7"H with status LEDs and 2-character readouts.
|
New (un-used)
|
$2,885.00
|
|
|
|
VICKERS
EHST-3-FIF-11
|
Proportional Hydraulic Pressure Control Valve 210-bar. New, in box with mating MS connector VICKERS EHST-3-FIF-11
|
Un-used but old
|
$1,275.88
|
|
|
|
G W LISK CO
L-5144
|
Flame arrestor/ Breather/ Vent Plug. Used in a variety of applications, flame arrestors are designed to extinguish any flame which would try to pass through it. Also known as Breathers or Vent Plugs. The GW Lisk Flame Arrestor incorporates a corrugated metal element which provides a matrix of small triangular openings. The materials used, the opening size, and the element length is determined by the application. Metal tapes used in the element are very thin and therefore create a minimum amount of pressure drop. Dimensions: 2" D x 1-1/8" high.
|
In Mfr Packaging
|
$15.00
|
|
|
|
MAROTTA SCIENTIFIC CONTROLS
PLV130BA 4810-00-829-6163
|
Solenoid Valve - Hydraulic Oil. 2-Position, Normally Closed. 3,000-PSI. 24VDC 1A. Stainless. AMC: 10179996 MAROTTA: 280164-E New. 4.25" x 3.6" x 2"wide.
|
In Mfr Packaging
|
$23.98
|
|
|
|
VICKERS
KFDG4V3 2C20NZMU1H720
|
Servo valve proportional controller.
|
New (un-used)
|
$895.88
|
|
|
|
SMC Pneumatic Inc
MHL2-25D
|
Pressure: 0.1 ~ 0.6 MPa MHL2, Air Gripper, Parallel Style, Wide Opening - Air Gripper, Parallel Style, Double Piston, Wide Opening, Two Fingers, 25mm Bore, Double Action, Operating Pressure: 0.1 ~ 0.6 MPa Effective Holding Force: 131N @ 0.5MPa - Bore Size: 25mm - Max Operating Freq: 60 C.P.M. - Opening / Closing Stroke: 50mm - Opening Width: 150mm - Closing Width: 100mm
Weight: 1690 grams -
|
Used
|
$245.88
|
|
|
|
Bimba
FS-090.125-1
|
1.5" SQUARE ROTARY AIR MOTOR 1-5/8" Tall 1/8" stroke pressure actuation - threaded ID
|
Good
|
$14.50
|
|
|
|
Bimba
SF D-7939-A-3
|
Cylinder, SS. Stainless steel. 3" Stroke, vacuum actuation. Dimensions: 1.5" D x 9" long, 3/4" threaded bushing.
|
New (un-used)
|
$20.00
|
|
|
|
Bimba
FT-17-2
|
FLAT II Stainless Steel Body Cylinders
|
Un-used but old
|
$34.50
|
|
|
|
American Bosch
ACB-10A-1314
|
Hydro-Pneumatic Accumulator. Gas volume: 229 cubic inches. Precharge pressure: 1500-psi. Max working pressure: 5,000-psi at 250F. Burst: 20,000-psi. Inert gas Only. Approximately 5.75"D x 20"L. Old, dirty, little rust and very heavy.
|
Used
|
$175.00
|
|
|
|
NORGREN
RCO21-20-50
|
RCO 21-20-50 BORE: 20mm ~ STROKE: 50mm ~ 1-10 BAR 80degC 0.867"D x 6.86mmL rod unextended, 0.312"D threaded rad with nut
|
New (un-used)
|
$65.00
|
|
|
|
Answer Engineering
TA-350-90-PN-8E-8T-400-A00-R82
|
TA-350-90-PN-8E-8T-400-A00-R82 made in USA looks in excellent condition but 3/4" shaft got rusty in storage. Two cables AC/DC Reed Switch. Two 0.436"ID ports. 350-In-Lbs @ 100-psi, 210-In-Lbs @ 60-psi270-deg rotation 4.5-IN-3
weighs 4.7 pounds. 3" square x 7" long plus 1.75" 0.75" rusty keyed shaft.
Guaranteed not DOA.
|
Good
|
$295.88
|
|
|
|
PARKER - Hydraulic Div
D3W1DNYC56-14
|
PARKER HYDRAULIC D3W1DNYC56 NEW tiny bit of shelf wear 120/60 0.72A
9.3-pounds about 70W x 240L x 110mmH
|
New (un-used)
|
$345.88
|
|
|
|
FLO-TORK
A1000-94-00-ET-MS1-RKH-N
|
Pneumatic rotary actuator. NIB. 94 Degree rotation, 125 PSI mac, 3/8" NPT, 1" Bore. More info: http://www.flotork.com/literature/Space_Defense/Flo-Tork/Flo-Tork_Catalog.pdf
|
New (un-used)
|
$275.00
|
|
|
|
PHD INC
MA21RF1090X2-PK-DR-D1-D2
|
PHD MA21RF 1 090X 2-PK-DR-D1-D2 Pnuematic Rotary-Linear ActuatorNew, out of box. 13" x 10" overall 1/2" shaft. 9 lbs unpacked.SHAFT
|
New (un-used)
|
$498.95
|
|
|
|
SMC Pneumatic Inc
CDQ2F40-130DC
|
MAX PRESSURE 145 PSI 1.00MPa, 0.60"D shaft with internal thread 2.0 x 2.5"W x 9"L overall CYL COMPACT LONG STK AUTO-SW actuator
|
New (un-used)
|
$74.95
|
|
|
|
PARKER HANNIFIN CORP
DSH102N
|
Valve, threaded cartridge. This appears to be just the important insert for the whole valve ~ DSH102 is a 2-position, 2-way, N.O. or N.C., spool-type solenoid operated directional control valve. DSH102N 26 LPM (7 GPM).
|
New (un-used)
|
$75.00
|
|
|
|
Automatic Valve
P1407JACR-AA & A5984-AA
|
Automatic Valve USA P1407JACR-AA UL CSA 1-1/4" with a famous PETER PAUL ELECTRONICS A5984-AA 120/60 8.7w 150 3/64X1/16 RL Actuator
|
New (un-used)
|
$125.00
|
|
|
|
HERION
80-227-70
|
Manual valve 25-150PSI. 80-227-70 NO is in RED, 80-207-70 NC is SILVER on the label. HERION is in RED.
|
New (un-used)
|
$185.00
|
|
|
|
MAC
6241C-211-PM-591DA
|
Pneumatic valve. Vacuum to 150-PSI. With (2)PME-591DABE 24VDC 2.5W 25~150-PSI (threaded for 5/8" pipe).
|
New (un-used)
|
$75.00
|
|
|
|
Festo
SPC10-POT-TLF
|
Cylinder end-position controller - SW:26 10 00 HW:01 12 99 - NEW, WITH CABLE
|
In Mfr Packaging
|
$359.00
|
|
|
|
Honeywell International Inc
RP908A1005-4
|
The RP908A is force balance pneumatic amplifiers, with adjustable proportional band in Percent, Direct or Reverse - for use as Controllers in HVAC systems - No Cover - Single Input
|
Un-used but old
|
$185.00
|
|
|
|
SMC Pneumatic Inc
MHL2-20D2-Y59BL
|
Parallel Style Wide Opening Air Gripper 20mm-bore, Double Piston, Wide Opening, Two Fingers, 20mm Bore, Double Action, Operating Pressure: 0.1 ~ 0.6 MPa Effective Holding Force: 74N @ 0.5MPa - Bore Size: 20mm - Max Operating Freq: 40 C.P.M. - Opening / Closing Stroke: 100mm - Opening Width: 150mm - Closing Width: 100mm - Weight: 1690 grams -
|
Good
|
$295.00
|
|
|
|
DESTACO
82M-7R63C80-NA
|
Rotary Actuator 15-120 Degree in 15 degree increments. Shaft: 0.867"[22mm] square. 82M-7R63 Series General Info: Drive:Right - Ports:1/4 NPT - Pounds:10 [ kg:4.6 ] - Clamping Force:3680 In-Lbs [420nM] - Inductive sensing module with LED display - DE-STA-CO Model Nr 8PW-082-1. Also available: 50M7D63C80-NA.
|
New (un-used)
|
$395.00
|
|
|
|
Bosch
081WV06P1V7001GDO
|
Valve, pneumatic directional, manually operated. Pmax 315 bar. Size: 47mm x 50mm x 147mm long.
|
Used
|
$100.88
|
|
|
|
Bimba
171-DNR
|
Stainless Steel CYLINDER BLOCK FRONT MNT 1-1/2 BORE - 1INCH STROKE
|
New (un-used)
|
$14.50
|
|
|
|
Festo
5322 281 20156
|
EXOTIC VALVE ASS'Y - NEW 3...8bar 43.5...116psi
1 Large, 7 Small input/outputs
|
In Mfr Packaging
|
$74.00
|
|
|
|
215-169A-2-90
|
Regulator, air pressure. Manifold. 1.43" x 1.50" x 4.3"L. With hardware.
|
New (un-used)
|
$44.95
|
|
|
|
Ashcroft
3HA16532-082
|
SS Lower Duralife Gauge. Type 1009 0-60PSI. Size: 3.5" 1/4-NPT. Connector: 1/4 NPT Lower. Material: 316 Tube & Socket. Range 60#. Not for Oxygen service.
|
New (un-used)
|
$39.95
|
|
|
|
SMC Pneumatic Inc
CDQ2A32-100DCM-XC18
|
Cylinder, air. 4 inch 100mm stroke. 145PSI-max 1.77 x 2.0 x 6.4"L including threaded shaft & nut.
|
New (un-used)
|
$47.88
|
|
|
|
HARRIS CALORIFIC CO.
47-50CR
|
Compressed gas regulator UL-650L max inlet 150psi and 0-60psi / 0-400kPa USG gage. 2.5 lbs.
|
New (un-used)
|
$44.95
|
|
|
|
PARKER
H1EWXBG3B9000GB
|
Valve, pneumatic: 145-PSI-max. Solenoid coil: 24VDC 2.3W P2E-HS32C. CSA approved. 1 lb
|
Un-used but old
|
$54.88
|
|
|
|
Watts Fluid Air Inc
R119-20J
|
Pneumatic regulator. Pilot operated regulator, 2.5" port, 300psi, 125F. More info:http://www.wattsfluidair.com/catalogs/0305_Sect%20B.pdf
|
New (un-used)
|
$429.75
|
|
|
|
KROM-SCHRODER
VG20TN03NQ92
|
IP54 C42.03 GAS SOLENOID VALVE 120 VAC 5 PSIG-GAS 3/4 NPT
GAS - MAGNETVENTIL CE
|
New (un-used)
|
$189.00
|
|
|
|
JATEK
920J-3005
|
Valve, pnuematic shut-off. 3/4"NPT. Label on the box implies the pneumatic control is heated. Overall Size: 4.25"D x 8.5"L. Weight 11.4 lbs unpacked. TKT1485
|
New (un-used)
|
$95.00
|
|
|
|
SMC Pneumatic Inc
NVFS3610-5DZ-03T
|
14-140F 22-150 PSI PNEUMATIC SOLENOID VALVE - [2] 21-26VDC 50/60Hz [really] Coils. 5-ports VALVE DBL NON PLUG-IN BASE MT - VFS3000 SOL VALVE 4/5 PORT
Assembled in USA of Japanese SMC parts.
|
New (un-used)
|
$0.00
|
|
|
|
DRUCK
PMP4070 1500psi
|
1500-psi signal: 25mm Dia x 155mm Long. Operating Supply: 15~32VDC HIRSCHMANN B12GDM connector
|
New (un-used)
|
$95.00
|
|
|
|
SUN HYDRAULICS
XICA-XXV
|
All ports blocked cavity plug ~ Cartridges : Corrosion Resistant : Cavity Plugs : 2 Port, All Ports Blocked. 5000-psI Series-3
|
New (un-used)
|
$27.95
|
|
|
|
Festo
LR-D-MIDI
|
p1 max: 16bar 230psi/1.6MPa p2 max: 12bar 175psi/1.2MPa
|
New (un-used)
|
$0.00
|
|
|
|
Bosch Rexroth
VT11131-12
|
Amplifier Module for Controlling Proportional Solenoids. Command Input 0-10V ~ Current Output Adj: 10-100% ~~ Ramp Time: 50mS~5S ~~~ Clock pulsr freq of Output: 300Hz +/-15% ~~~~ Supply: 21-35VDC 1.3A ~~~~~ Solenoid Current: 1.6Amax; R(20)= 5.4 Ohms ~~~~~~ 25x79x85.5mm ~ sealed pkg from Germany ~ VT 11131-12 Serie 12a IP20 DIN40050
|
New (un-used)
|
$229.00
|
|
|
|
ROSS CONTROL
8076B3361
|
24VDC VALVE BAR 2-10 NE2-1 4-PIN MALE CONNECTOR ON TOP - about 130 x 45 x 110mm tall. New
|
New (un-used)
|
$125.00
|
|
|
|
ABB
YN700087J2
|
Bell body assembly, W/B STG 1 - Spec: 2N1403 - 157mm Dia at base x 120mm dia cylinder x about 300mm Tall - New -Standard feed tube - spex all in Japanese ~~~ has a large sealed vial: TR2-W-KI-BH BW 328TZ
|
New (un-used)
|
$0.00
|
|
|
|
VICKERS
KFDG4V 3 2C20N Z M U1 H7 20
|
Servo valve proportional controller. Tagged "Repair & return." Dimensions: approximately 1.8"square x 11.7" Long. Used.
|
Used
|
$295.00
|
|
|
|
Bimba
FO-171
|
FLAT-1 Cylinder 2.6" dia x 2"Long
|
New (un-used)
|
$125.00
|
|
|
|
SUN HYDRAULICS
EBA 0CH7-AC
|
Manifold. Dimensions: 1.75 x 1.7 x 4.9" long.
|
New (un-used)
|
$125.00
|
|
|
|
Bimba
FS-311-M
|
FLAT-1 Cylinder 2.5"square x 3"Long - New
|
New (un-used)
|
$95.00
|
|
|
|
LINCOLN
877A
|
877 Series A 5AMP Metering Dispenser - In QUARTS 0-16-Inner dial, 0-4 Outer dial Hand Held, supply in handle threaded 0.70"ID with 15"long Hose Assembly.
|
Un-used but old
|
$169.00
|
|
|
|
Festo
SPC11-POT-TLF
|
SOFT STOP Cylinder End-Position Controller with Display, new with manual - "used with permitted drives and measuring systems, as well as with a proportional directional control valve type MPYE-5 . . . permits fast movement into two end positions set with fixed stops as well as into one or two mid-positions."
|
Un-used but old
|
$0.00
|
|
|
|
FEC
AFC1500
|
for RM3 motors, 200W We bought as new, but after reading the included factory NUTRUNNER TEST CALIBRATION DATA SHEET, we see it was calibrated in Michigan 1/24/2008 - SAN Inrush Current:38A SAN Idle Power:18W SAN In Cycle Power:88W/hr (M) designation on SAN part number signifies for use with Main Unit - Isolated Gate Bipolar Technology (IGBT) - Fully Digital System (eliminates analog potentiometers) - 32 different work parameters (part programs) that can be stored into Flash ROM. No battery backup required - External communication is available through (2) RS-485 ports. http://www.fec-usa.com/support/download/manuals/1500/eng/1500e4.pdf
|
New (un-used)
|
$0.00
|
|