Process Control > Solenoids



51 Results  1 2  
Mfg. Part # Description Condition Price Buy
PSP MFG
5945-502-4495 SD-845
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: continuous. Coil: 24VDC 0.58A 41 Ohms. Plunger config: round with 3/8" loop. Mech: rectangular flange. Body dim: 1.5"D x 4". Weight: 1.1 lbs. Connection: MS3102A-125-3P Conn.. New (un-used) $24.00
Unmarked
SOL-20
Solenoid, AC. Operation: pull. Load force: >48 oz. Stroke length: 0.6. Duty cycle: continuous. Coil: 26VAC 0.75A 5.5 Ohms. Plunger config: rectangular w/pin-in-U. Mech: 8 holes on base. Body dim: 1.2"x1.5"x2.5" . Weight: 0.42 lbs. Connection: 3/16" male spades. Used $2.95
GUARDIAN
A420-064181-00
Solenoid, DC. Operation: pull. Load force: >16 oz. Stroke length: 0.5. Duty cycle: continuous. Coil: 24VDC 0.3A 77 Ohms. Plunger config: round w/ slot & hole. Mech: 2 6-32 holes in base. Body dim: 1.4"x0.85"x2.75". Weight: 0.2 lbs. Connection: polarized coil w/int.diode, narrow pin (+). New (un-used) $4.95
GUARDIAN
A420-066464-02
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 1. Duty cycle: continuous. Coil: 24VDC 0.24A 100 Ohms. Plunger config: round w/ slot & hole. Mech: 3/4-24 threaded col.. Body dim: 3" x 1.0"D. Weight: 0.37 lb. Connection: 3" leads w conn.. New (un-used) $7.95
DORMEYER INDUSTRIES
P4-1L
Solenoid, DC. Coil voltage 12VDC, Pull-type, Continuous duty cylindrical solenoid   0.75" diameter x 1.5" behind threaded mounting bushing 0.55", nut included.  24-ohm coil = half an ampere. New (un-used) $7.95
Magnet Schultz Of America
S-0-6635
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 1. Duty cycle: continuous. Coil: 24VDC 0.33A 72 Ohms. Plunger config: round w/slot & hole. Mech: 2 pairs of side holes. Body dim: 0.95"x1.2"x1.95". Weight: 0.28 lbs. Connection: 3/16" male spades. In Mfr Packaging $7.95
MELETRON
137
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: intermittent. Coil: 26VDC 12A 2.7 Ohms. Plunger config: round w/ 1/4-32 hole. (Will extend approximately 3/4" away form unit). Mech: square flange/4 holes. Dimensions: overall 3" x 2-1/2" x 2-1/4" high. Weight: 2.2 lbs. Connection: 8-32 studs for coil connections. Un-used but old $17.48
HYDRO AIRE,
335974-11
Solenoid, DC. Operation: pull. Load force: >16 oz . Stroke length: 0.5. Duty cycle: continuous. Coil: 12VDC 0.3A 41 Ohms. Plunger config: round w/ 8-32 hole. Mech: clamp by dia.. Body dim: 3" L, 1.5"D. Weight: 0.64 lbs. Connection: MS3102A-125-3P Conn.. New (un-used) $11.00
Detroit Coil Co / DECCO
SOL-08
Solenoid, AC. Operation: pull. Load force: >32 oz. Stroke length: 0.6. Duty cycle: continuous. Coil: 115VAC 0.25A 87 Ohms. Plunger config: rectangular w/hole. Mech: 4 holes in base. Body dim: 1.2"x1.5"x2.5" . Weight: 0.43 lbs. Connection: 12" 20 ga leads. New (un-used) $6.78
GUARDIAN
A420-062076
Solenoid, DC. Operation: pull. Load force: >16 oz. Stroke length: 0.3. Duty cycle: continuous. Coil: 115VDC 0.045A 3200 Ohms. Plunger config: round w/slot & hole. Mech: 2 4-40 holes in base. Body dim: 0.75"x0.75"x1.6". Weight: 0.1 lbs. Connection: 6" 24 ga leads. Un-used but old $3.48
Detroit Coil Co / DECCO
9-115 115/60
Solenoid, AC. Operation: pull. Load force: >32 oz. Stroke length: 0.6. Duty cycle: continuous. Coil: 115VAC 2A 61 Ohms. Plunger config: rectangular w/hole. Body dim: 2"x1.2"x2.4". Weight: 0.58 lbs. Connection: 8" 16AWG leads w/hook lugs. Un-used but old $3.95
GUARDIAN
16-C-24VAC A420-062201-00
Solenoid, DC. 24VAC continuous duty with 0.5uf 400VDC capacitor attached. Coil: 120 Ohm. Dimensions:  1-5/8" long x 1-1/2" high w/out plunger , 1-3/16" with flange mount. Plunger measures: 1-15/16". P/N:E-120-53W2780. Un-used but old $9.50
GUARDIAN
A420-060997-00
Solenoid, DC. Operation: pull. Load force: <2 oz. Stroke length: 0.2. Duty cycle: continuous. Coil: 24VDC 0.012A 2300 Ohms. Plunger config: round w/ slot & hole. Mech: brkt w. 2 4-40 holes. Body dim: 1.0"x0.5"D. Weight: 0.04 lb. Connection: 4" 24 ga leads. Un-used but old $4.95
Line Electric
KL-123-1
Solenoid, DC. Operation: pull. Load force: >16 oz . Stroke length: 0.3. Duty cycle: continuous. Coil: 48VDC 0.01A 4800 Ohms. Plunger config: round w/ slot & hole. Mech: 2 10-32 holes in frame. Body dim: 1.94"x1.37"x1.6". Weight: 0.30 lbs. Connection: 3/16" male spades. New (un-used) $3.95
GUARDIAN
A420-065891-00
Solenoid, AC. Operation: pull. Load force: >32 oz. Stroke length: 0.5. Duty cycle: continuous. Coil: 230VAC 0.09A 340 Ohms. Plunger config: rectangular w/u-brkt. Mech: 8 holes on base. Body dim: 2.3"x1.2"x1.5". Weight: 0.41 lbs. Connection: 1/4" spades on coil. New (un-used) $9.25
Line Electric
KL123-5
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.5. Duty cycle: continuous. Coil: 12VDC 0.15A 77 Ohms. Plunger config: tubular w/slot & hole. Mech: 2 10-32 holes. Body dim: 1.83"x1.4"x1.8". Weight: 0.32 lbs. Connection: solder lugs on coil. Un-used but old $9.99
Magnet Schultz Of America
S-0-6675
NEW 24VDC PULL SOLENOIDS box frame solenoid, maximum 5 oz at 0.5 inches stroke, minimum 48 oz at 0.12 inch- 52-0hm coil - Continuous Duty - box frame body: 1.65" x 1.4" x 1.8". In Mfr Packaging $7.95
Magnet Schultz Of America
S-0-7535
Solenoid, AC. Operation: push/pull. Load force: 9.6 oz at 0.2" stroke. Stroke length: 0.2. Duty cycle: continuous. Coil: 120VAC 225 Ohms. Plunger config: round 0.31"D plunger w/ 0.094"D 1.6"L rod. Mech: 2 0.11" holes 1" apart. Body dim: 1.86" x 0.94"W x 1.87"L plus 3" plunger. Weight: 5 oz. Connection: 2 x 0.187" terminals. In Mfr Packaging $19.00
GUARDIAN
TP4X16-I-24D
Solenoid, DC. Operation: push. Load force: >6 oz. Stroke length: 1. Duty cycle: intermittent. Coil: 24VDC 0.35A 68.8 Ohm. Plunger config: round with 0.062" dia push pin. Mech: 3/8-32 thrd col w/brkt. Body dim: 0.5"D x 3.8"L. Weight: 0.1 lbs. Connection: 8" 24ga leads. In Mfr Packaging $12.95
GUARDIAN
A420-062396-00
Solenoid, AC. Operation: push. Load force: >16 oz. Stroke length: 0.3. Duty cycle: intermittant. Coil: 115VAC 0.3A 63 Ohms. Plunger config: round w/.75" knob. Mech: 4 8-32 holes. Body dim: 1.65"x1.45"x2.3". Weight: 0.55 lbs. Connection: 5" 18 ga. leads. Un-used but old $9.00
PSP MFG
SD-118-L
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.8. Duty cycle: intermittant. Coil: 30VDC 12A 2.5 Ohms. Plunger config: round w/10-32 hole. Mech: 2 undrilled brackets. Body dim: 1.5"D x 3.0"L. Weight: 0.9 lbs. Connection: MS3102A-125-3P Conn.. Un-used but old $11.96
Unmarked
E120-87
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: continuous. Coil: 115VDC 0.24A 475 Ohms. Plunger config: rectangular w/u-brkt. Mech: 8 holes on base. Body dim: 1.2"x1.5"x2.5". Connection: solder lugs on coil. Weight: 0.4 lbs. Un-used but old $1.95
GUARDIAN
A420-062879-01
Solenoid, DC. Operation: pull. Load force: >32 oz. Stroke length: 0.5. Duty cycle: continuous. Coil: 12VDC 0.4A 29 Ohms. Plunger config: round w/u-brkt/pin . Mech: 2 6-32 holes. Body dim: 0.95"x1.2"x1.1". Weight: 0.207 lbs. Connection: 3/16" male spades. Un-used but old $4.95
GUARDIAN
A420-059001-00
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.6. Duty cycle: continuous. Coil: 24VDC 0.143A 168 Ohms. Plunger config: rectangular w/u-brkt. Mech: 8 holes on base. Body dim: 1.2"x1.5"x2.5" . Weight: 0.35 lbs. Connection: 5" 22 ga leads. New (un-used) $6.00
GUARDIAN
A420-060761-00
Solenoid, DC. Operation: open/close. Load force: >48 oz. Stroke length: 1. Duty cycle: continuous. Coil: 170VDC 0.109A 1560 Ohms. Plunger config: round w/slot & hole. Mech: 2 pairs of side holes. Body dim: 0.95"x1.2"x1.95". Weight: 0.27 lbs. Connection: 6" 22 ga leads. note: Alt P/N: E120-54. New (un-used) $9.95
GUARDIAN
A420-061055-00
Solenoid, AC. Operation: pull. Load force: >32 oz. Stroke length: 0.5. Duty cycle: continuous. Coil: 115VAC 0.18A 83 Ohms. Plunger config: square with u-brkt and aux. contact. Mech: 8 holes on base. Body dim: 1.2"x1.5"x3.5" . Weight: 0.48 lbs. Connection: solder tabs on coil. Un-used but old $4.95
Detroit Coil Co / DECCO
SOL-02
Solenoid, AC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: continuous. Coil: 115VAC 0.35A 29 Ohms. Plunger config: rectangular w/pivoting chain link. Mech: 4 slots in base. Body dim: 2"x2"x2.75". Weight: 1.0 lbs. Connection: 7" 16 ga leads. Un-used but old $12.95
RBM CONTROLS/ESSEX
70-120226-5
Solenoid, DC. Operation: close. Load force: N/A. Stroke length: N/A. Duty cycle: continuous. Coil: 36VDC 0.35A 107 Ohms. Plunger config: N/A. Mech: 2 5/16" oval holes. Body dim: 3.5"x2.5"x2.5". Weight: 0.76 lbs. Connection: 5/16" studs NI-coil. Removed from equipment $6.39
CONTROLS CO
4-211
Solenoid, AC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: continuous. Coil: 24VAC 3A 2.4 Ohms. Plunger config: rectangular w/u-brkt. Mech: 4 hole / 4 slots. Body dim: 2.5"x1.8"x2" . Weight: 1.0 lbs. Connection: solder lugs on coil. Removed from equipment $6.88
Artisan Controls
KL-123-1
Solenoid. Resistance: 5K Ohm. Dimensions: 1.4" x 1.5" x 1.6" heavy slotted 0.5" D plunger. Un-used but old $6.50
GUARDIAN
A420-064182-00
Solenoid, DC.  Operation: pull in against spring Load force: >16 oz. Stroke length: 0.5. Duty cycle: continuous. Coil: 24VDC 0.3A 77 Ohms. Plunger configuration: round w/ slot & hole. Connection: polarized coil w/internal diode, narrow pin (+). Mounting mechanical: 2 6-32 holes in base. Overall Body dimensions: 1.4"x0.85"x2.75".  Weight: 0.2 lbs. Un-used but old $7.96
GUARDIAN
A420-063204-00
240VAC SOLENOID Un-used but old $0.00
Unmarked
109-1295
1.15"OD x 0.83" 3-wire - more info to come New (un-used) $0.00
Magnet Schultz Of America
S-0-6244
Solenoid, DC. Intermittent duty cycle 24VDC pull, 14 ohm coil, 100 ounce.  Maximum 118.7 oz at .025 in., minimum 92.5 oz at .025 in., primary function pull, intermittent duty cycle. Package: cylindrical 1.5" OD x 2" long. Threaded bushing panel mount. Note: REGDON 24VDC-ID. In Mfr Packaging $9.99
Boeing/McQuay-Norris
3380-079250260
Solenoid 24VDC "Bomb Arming B-47" 15.2AMP 2-ohm coil 3380-079250260 in original Airforce box for Boeing in Wichita Kansas 2.3"D x3.8"H mounts with four studs 2.0" spacing, about 0.4" travel 0.26"D shaft New (un-used) $34.95
GUARDIAN
A420-066410-00
Solenoid, DC. Operation: pull. Load force: >6 oz. Stroke length: 0.15. Duty cycle: intermittant. Coil: 6VDC 0.37A 16 Ohms. Plunger config: round w/slot head . Mech: PCB mount. Body dim: 0.5"x.375"x1. Weight: 0.01 lbs. Connection: PCB termination pins. Un-used but old $1.59
Magnet Schultz Of America
MSA/0022
Solenoid, DC. 12VDC. Tubular/Cylindrical only 0.44" D x 1.662" long including unextended rod 0.157" D. New (un-used) $8.95
DECO
9-115 230/60
Solenoid, AC. Operation: pull. Load force: >32 oz. Stroke length: 0.6. Duty cycle: continuous. Coil: 230VAC 2A 61 Ohms. Plunger config: rectangular w/hole. Body dim: 2"x1.2"x2.4". Weight: 0.58 lbs. Connection: 8" 16 ga leads. New (un-used) $3.95
Lumberg
ZVS 8-30
Multi-port distribution system. Parallel wired 10 pole male receptacle 3 pole female receptacle 300V 7A. Un-used but old $85.00
Festo
MSFG-24
Solenoid, DC. Coil 24VDC 4.5 watt. Removed from equipment $9.00
Line Electric
BR178-1
Solenoid. Ink priming, 240V. Assembly dimensions: 2" wide x 2" deep x 2-1/2" high. Contacts: (2) 3/16" male QC terminals. Removed from equipment $3.00
Magnet Schultz Of America
S-0-6171
Solenoid, Cylindrical, Pull type, 12VDC/72 Ohm coil; Holding force: 4.5-oz; Duty: Continuous; Body  dimensions 0.44"-OD x 1.67"; Long threaded bushing mount;  max pull from end of shaft is 1". Armature size: 1.44" long x 0.157" D. Nut and washer provided. In Mfr Packaging $9.00
Magnet Schultz Of America
S-0-9564
Solenoid, DC. Operation: push. Load force: 55 oz at 0.03". Stroke length: 1.2. Duty cycle: intermittant. Coil: 24VDC 1.6A 15 Ohms. Plunger config: round with 0.1" dia pin. Mech: 3/4-24 collar w/nut. Body dim: 1"D x 4"L. Weight: 0.36 lbs. Connection: 5" 22 ga leads. In Mfr Packaging $17.95
Magnet Schultz Of America
S-0-9562
Solenoids, DC. Push, 24VDC continuous duty cycle 105 ohm, 35 ounce at 0.03 inches. Dimensions: 1.0" OD x 2.4" long excluding 3.95" long rod. In Mfr Packaging $19.95
Magnet Schultz Of America
S-0-6698
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 1. Duty cycle: intermittant. Coil: 110VDC 0.3A 330 Ohms. Plunger config: round w/slot & hole. Mech: 4 8-32 holes on 2 sides. Body dim: 1.4"x1.6"x4" . Weight: 0.8 lbs. Connection: 3/16" male spades. In Mfr Packaging $12.48
Magnet Schultz Of America
S-0-6697
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 1. Duty cycle: continuous. Coil: 110VDC 0.114A 1060 Ohms. Plunger config: round w/slot & hole. Mech: 4 8-32 holes on 2 sides. Body dim: 1.4"x1.6"x4" . Weight: 0.8 lbs. Connection: 3/16" male spades. In Mfr Packaging $17.95
Magnet Schultz Of America
S-0-6625
Solenoid, DC. Voltage: 24VDC. Continuous Duty Cycle 115 ohm, 23 ounce at 0.05 inch. Box Frame 1.2"x1.2"x1". New (un-used) $9.95
Magnet Schultz Of America
S-0-6384 R8X16
Solenoid, DC. Operation: pull. Load force: 4.5 oz. Stroke length: >1. Duty cycle: continuous. Coil: 24VDC 0.12A 192 Ohms. Plunger config: tubular. Mech: 3/8" threaded bushing w/ nut. Body dim: 0.5"H x 2.65"L. Weight: 1.5 oz. Connection: 2" behind panel. Note: Regdon R8X16-6384. In Mfr Packaging $8.98
Magnet Schultz Of America
S-0-6224
Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.5. Duty cycle: continuous. Coil: 24VDC 0.83A 29 Ohms. Plunger config: round w/slot & hole. Mech: 3/4-24 collar w/nut. Body dim: 1"D x 2"L. Weight: 0.22 lbs. Connection: 5" 22 ga leads. In Mfr Packaging $5.95
Magnet Schultz Of America
S-0-6173 R7X9/6173
Solenoid, DC. Operation: pull. Load force: 4.5 oz. Stroke length: 0.5. Duty cycle: continuous. Coil: 24VDC 0.083A 290 Ohms. Plunger config: tubular. Mech: 0.313" threaded bushing. Body dim: 0.45"H x 1.67" w/ plunger. Weight: 0.5 oz. Connection: 6" wire leads. In Mfr Packaging $9.95
51 Results  1 2