|
|
HONEYWELL/MICROSWITCH
2L82
|
Display module with removable legend: END OF PAPER for 2L-series of the original illuminated push button Microswitches seen in all the old movies . . . 2.4W max for up to four T1-3/4 midget flange lamps. Legend plate is 0.865 x 0.59" Switch Lens For Use With:Pushbutton Switch Lens Shape:Rectangular
Lens Height:16mm Lens Width:22mm Lens Depth:0.78mm
RoHS Yes
|
NOS
|
$7.95
|
|
|
|
EAO SWITCH
14-131.025/010
|
ILLUMINATED Momentary Push Button Red lens Switzerland Beautiful parts.
|
FN
|
$19.95
|
|
|
|
DIALCO/DIALIGHT
513-0308-604
|
Illuminated Push Button Switch BASE for T1-3/4 lamp 1 N.O. & 1 N.C.
New 1 per bag, 3 washers, one locating ring and one dress nut - No Pushbutton Lens Cap - Accepts cap size 1/4" ID.
|
NS
|
$4.95
|
|
|
|
HONEYWELL/MICROSWITCH
MML21KA3AAK
|
Unsealed OI-PB Switch NO SWITCH TOP OR BULB
|
FN
|
$6.25
|
|
|
|
STACOSWITCH
IM1562
|
Switch, bank. Contacts: 3 position each DPDT. Actuator: PO, PO Illuminated. Mech: 2.43"W x 0.75"H x 3.14" Deep. Note: 2-Momentary and 1-Latching. All 3 DPDT Switches have sockets for up to (4) T1-3/4 Lamps (Seven #367 28V lamps included ) and are front panel removable. Legends are pre-printed for a gov't radio installation.
|
NS
|
$19.95
|
|
|
|
ALLEN BRADLEY - AB
800MS-Q24
|
1.2" Square Face Green Pilot Light is 3/4"wide x 1/2"high 24VAC/DC Lamp#28MB telephone wedge lamp included - square polit lite with "IN POS" OR "FAULT" or "HOME" Name Plates above Green indicator lens. Mounts in 7/8" dia hole.
|
NS
|
$23.50
|
|
|
|
NKK
UB15KKW015F-FF
|
Switch, illuminated pushbutton. SPDT momentary. Silver contact rating 5A at 125VAC. Illumination: LED, green. Illumination voltage (nominal) 2.25VDC. Panel mount, snap-in 0.638"square for panel thickness .039" to .126".
|
NEW
|
$7.95
|
|
|
|
SWITCHCRAFT
25312L
|
3-Position Maintained - with 6Volt 200ma screw base lamp - accepts colored gels for 3 positions (Not included). There are (6) contacts, not all of which move at the same time. SPDT UP, Center Contact and SPDT DOWN. 2.25" behind panel, 0.61" wide, 1.2" tall bracket. Contacts are Probably old Palladium.
|
NOS
|
$17.95
|
|
|
|
CUTLER-HAMMER AEROSPACE
A03A5M
|
MILITARY SWITCH BASE ILLUMINATED 3-Position Center-Off One-Side-Momentary - NO ACTUATOR SPDT-ROCKER TYPE
|
NS
|
$3.94
|
|
|
|
EAO SWITCH
61-1200.0
|
For a 60V Illuminted P/B Switch, Bezel/socket only, no lamp, no switch top.
Awaiting lamp & Top & Contacts. Everything else is there but the electricity.Switch Function Type:Maintained, Voltage, Contact AC Max:250V ,
Contact DC Max:250V, Max Contact Current AC:5A, Terminal Type:Solder,
Approval Bodies:VDE, UL, CSA, SEV, Behind Panel Depth:48mm,
RoHS Yes
|
NS
|
$6.99
|
|
|
|
ROWAN ILL
2101-CPAOPAR
|
ILLUMINATED 1-AMP CIRCUIT BREAKER and PUSH ON / PUSH OFF SWITCH 120V 1HP 120V LAMP 0.75"OD Panel Mount - Trip 1.25Amps - two decorative nuts Included - NEW old stock in original boxes - included GEB2A bayonet Neon Lamp and hardware
|
NS
|
$3.98
|
|
|
|
MOLEX
1820M
|
Switch, Illuminated. SPDT-N.Open 2A 125VAC momentary push button snap action. 115V Lamp isolated from switch. Amber lamps, under a white lens, shows amber. Has two 0.19" male QC terminals for lamp and two for switch. Snap-in mount in 1.0" x 0.5" slot.
|
NS
|
$2.00
|
|
|
|
MICRO SWITCH
3-057
|
MIXED DPDT+ SPDT ILLUMINATED LATCHING P-BUTTON MICRO
|
OLD
|
$2.48
|
|
|
|
CUTLER-HAMMER
SC2GXNI
|
ILLUMINATED ROCKER SW MOM DPDT MIN 5AMP 125V ON(ON) RED LENS LAMP INCLUDED - T1 3/4 BI-PIN 5 OR 6V LAMP EASY MT SNAP IN STYLE
|
NS
|
$3.00
|
|
|
|
UNMARKED
3-009
|
ILLUMINATED MOM SW SPDT PUSH BUTTON WHITE/FROSTED LENS
LAMP NOT INCLUDED
|
NS
|
$6.48
|
|
|
|
EATON/C-H
770K22810
|
Switch, pushbutton latching. Contacts: DPDT 10.5 AMP. Actuator: illuminated. Body: rectangle 28mm x 22mm with the attached holder. Note: Takes Two T1-3/4 midget flanged lamps up to 28V.
|
NOS
|
$44.75
|
|
|
|
CUTLER-HAMMER
770K12810
|
Illuminated Compulite Push Button with Two T1-3/4 28V lamps. Momentary DPDT contacts. 30mm x 24.3mm x 74mm long - yellow Push Button, Mounts in a rectangle 28mm x 22mm with the attached holder. Takes Two T1-3/4 midget flanged lamps up to 28V. DPDT - 10.5Amps
|
NOS
|
$34.95
|
|
|
|
CHALLENGER
1261-CL
|
CLEAR ILLUMINATED TOGGLE SWITCH SINGLE POLE 15 AMPS - 120/277 VAC PILOT LIGHT BACK AND SIDE WIRED / SPRING-LOADED SCREW TERMINALS / HEXHEAD GROUNDING SCREW(FOR MOUNTING IN A 2X4 HANDY BOX)
|
NS
|
$5.00
|
|
|
|
UNMARKED
3-245
|
ILLUMINATED SWITCH TOP ONLY / SNAP IN
3/4" SQUARE x 7/16" TALL
|
NS
|
$3.00
|
|
|
|
UND LABS
MXSP10400
|
Illuminated Push Switch with Red 0.674 X0.627 Lens.
115VAC lamp with DPDT 10.1A@125/250VAC contacts Unit will fit in a
0.850 X 0.80 hole. (Snap in switch)
|
NS
|
$2.25
|
|
|
1 2 3 4 5 ...
|