|
|
Cherry Corp
D41LR1RA
|
Switch, Roller. Contacts: SPDT. Contact Ratings: 0.1A-logic level 125VAC. Actuator: momentary. very light force required. Connection: 3/16"QC or solder terminals. Body: 38mm long x 28mm x 9.6mm.
|
New (un-used)
|
$1.47
|
|
|
|
Cherry Corp
E62-46K
|
Switch, micro, roller. Contacts: SPDT. Contact Ratings: 10.1Amp 125/250VAC, 1/4HP 125VAC. Connection: PC leads. Mech: PCB. Body: 19.8mm long x 6.3mm wide x 11.4mm high. Overall with actuator 25.0mm wide. Note: Miniature. Listed: UL/CSA.
|
New (un-used)
|
$2.95
|
|
|
|
C & K Components
3TMA-4A
|
Switch, micro. With roller. SPDT NC/NC 15Amp 1/2HP 125, 250VAC/ 0.25Amp 250VDC/ 0.5Amp 125VDC/3Amp 125VAC. Operating temperature: –67 Deg F to 302 deg F (–55 Deg C to 150 Deg C). Double marked: TMCJ4A. Listed: UL/CSA. Note: Cam rotary.
|
New (un-used)
|
$4.50
|
|
|
|
Cherry Corp
E73-47K
|
Switch, micro w/roller arm. Contact Ratings: 0.1Amp 125VAC, gold cross-point (5V logic) contacts . Actuator: NC snap-action. Connection: 2 wire leads 9.5" long. Mech: mounting holes on about 5/8" centers. Note: Only requires about 1/3" of movement for actuation. Water-resistant and weatherproof.
|
New (un-used)
|
$4.95
|
|
|
|
Honeywell/Microswitch
BZ2RQ18
|
Switch, limit. Contacts: SPDT. Contact Ratings: 15A 125/250/480VAC. Actuator: Plunger with roller. Connection: Solder terminals. Elect config: Snap acting. Mech: Threaded bushing with nuts, 0.46"D x 1"L. Body: 0.68" x 1.95" x 0.8" behind panel. Weight: 0.2 lbs. Note: Operating force: 9 - 13 ounces. Roller travel:0.01" plus 0.2" overtravel.
|
New (un-used)
|
$9.50
|
|
|
|
Honeywell/Microswitch
BZ2RW826
|
SPDT 15A Moveable ROLLER LEVER SNAP-ACTING MICROSWITCH UL/CSA 125,250 OR 480VAC BASIC SWITCHES - Roller swings back down to 90-degrees - Unique - NEW
|
In Mfr Packaging
|
$14.95
|
|
|
|
JBT
3-532
|
Switch, rocker. Contacts: SPDT. Contact Ratings: 5A 125VAC. Actuator: paddle. Connection: PC pins. Mech: panel mount, two holes 0.93" spacing plus two 0.25" spacers, screws & nuts. Package of 2.
|
New (un-used)
|
$3.00
|
|
|
|
LICON
76-1290
|
Switch, limit with manual reset. Contacts: DPST. Contact Ratings: 10A 125/250VAC. Actuator: two positions, maintained. Connection: four solder terminals. Mech: riveted on small plate. Body: 0.25" x 1.2"L x <1.0"H. Note: Has unusual mechanical reset once roller/lever is pushed and snaps..
|
Removed from equipment
|
$3.48
|
|
|
|
Cherry Corp
A413-RWAF
|
ROLLER MICRO SWITCH SPDT - 125VAC
|
Un-used but old
|
$2.59
|
|
|
|
Cutler-Hammer
SS12FT30-102L4
|
Switch, micro. With roller. Two (2) position, one NO, one NC, 10Amp 125/250VAC.
|
New (un-used)
|
$7.50
|
|
|
|
OMRON
Z-15GW2
|
Switch, micro. With roller lever. SPDT 15Amp. Body: 49mm x 18mm x 27mm less arm and plastic roller, short travel required, screw terminals with solder lugs.
|
In Mfr Packaging
|
$5.86
|
|
|
|
Cutler-Hammer
SS12EV10-102L4
|
Switch, micro. With roller. One NO 15A 125/250VAC.
|
New (un-used)
|
$7.50
|
|
|
|
Cutler-Hammer
SS10ET20-20Y2
|
Switch, micro. One NO, one NC, 15Amp 125/250VAC. Spring loaded plunger over roller.
|
New (un-used)
|
$7.50
|
|
|
|
Honeywell/Microswitch
8V1012B-M
|
Switch, rocker. Contacts: SPDT. Contact Ratings: 25mA/20VDC. Actuator: On-On. Mech: PCB, with frame, 4 pin. Note: Miniature.
|
New (un-used)
|
$1.50
|
|