Hand Tools

Filter  
Manufacturer  
Unit of Measure  
Price  
View as List Grid

Items 1-24 of 51

Page
per page
Set Descending Direction
  1. PC Board drill Bit - Unidentified MFG - Hardware, Drill Bit. Premium Carbide #59 1.05mm.
    PC Board drill Bit - Unidentified MFG - Hardware, Drill Bit. Premium Carbide #59 1.05mm.
    Special Price $2.49 Regular Price $4.00 As low as $1.49
    IN STOCK - MORE THAN 500 READY TO SHIP!

    PC Board Carbide Drill Bit #59.

    Carbide micro drill bits provide excellent hardness, wear resistance, and heat resistance. They create precise holes with a smooth finish and often eliminate the need for reaming the hole after drilling.

    Premium Grade Carbide #59 Decimal Size 0.041" (1.05mm).

    Shank Diameter is 0.125", with an overall 1.48" long.

    130° Drill Point, Fast Spiral Circuit Board Drill.

    1/8" Round Shank fits CNC's and most Rotary Equipment.

    Used for drilling PC boards or other abrasive materials when drilling accuracy must be maintained. 

    For wide range of materials including non-ferrous alloys. 

    Excellent for drilling Fiberglass, Plastics, Wood, Carbon Fiber, Phenolic, etc..

    Alternate: 414D96 

    New - Made in USA 

    Learn More
  2. CBB - 8-226 - Anti-Sparking tool.
    CBB - 8-226 - Anti-Sparking tool.
    Special Price $2.98 Regular Price $4.50
    IN STOCK - MORE THAN 100 READY TO SHIP!

    CBB Anti-Sparking tool.

    For springs and typewriters in hazardous locations. 

    Material: bronze. Each 0.188" D x about 6" long.

    One has a sharp hook and a sharp flat point and the other tool has a fork and a rounded end.

    Quite unique and handy, comes in it's own plastic pocket pouch.

    Learn More
  3. WINTER - 3UZ71P-100-39 - 4-Inch Full-Bullnose Diamond Grinding Wheel
    WINTER - 3UZ71P-100-39 - 4-Inch Full-Bullnose Diamond Grinding Wheel
    $448.89
    READY TO SHIP - ONLY 1 LEFT IN STOCK!

    Non-Segmented Roll Wheel Dresser - Reverse Olated Rotary Diamond Dresser - 25 mesh - Precision Full-bullnose Diamond Grinding Wheel - 4" OD 2" ID 1.7"wide - In a nice tongue&groove Treasure Chest made & shipped from West Germany - Uses Flood Coolant

    Learn More
  4. Unidentified MFG - Micrometer Head - Micrometer Head, 0-25mm metric.
    Unidentified MFG - Micrometer Head - Micrometer Head, 0-25mm metric.
    $25.00
    Micrometer Head, 0-25mm metric. Graduations 0.01mm, with locknut. Approximately 4" long. Spherical tip. Maybe Mitoyo 148 Series. Learn More
  5. Unidentified MFG - 8-982 - T8 Torx Bits Stamped T8 USA
    Unidentified MFG - 8-982 - T8 Torx Bits Stamped T8 USA
    Special Price $0.39 Regular Price $0.50

    T8 Torx Bits Stamped T8, 1/4" Bit

    Torx is a brand name trademark for fastener heads and keys that have a six-point, star-like pattern. One of the beauties of Torx sizes is that they are universal, meaning there is not an SAE vs Metric version. They are all the same.

    High resistant to wear and tear for a long tool life

    Impact resistant modified chrome-vanadium-molybdenum

    Tool Steel, Hardened

    Imperial Point to Point: 0.90" (2.31mm)

    Suitable for all applications Hardness HRC 59-61

    Suitable for both manual & machine applications

    Made in USA

    Learn More
  6. TREX-ONICS - 74705 - Nutrunner cable. 20 Conductor.
    TREX-ONICS - 74705 - Nutrunner cable. 20 Conductor.
    $178.88
    Nutrunner cable. Connector assembly. 18/5C-slhd + 22/4C-SHLD + 22/11C O/A Shield, 300V 90 Deg C. With attached heavy duty M-F 20 position connector. Length 5 Meter. Note: Fits - Atlas Copca. Alt P/N: TPC74705 or 23923-09. More info: http://www.tpcwire.com/images/TPC_Catalog/23_Nut_Runner_Assemblies.pdf Learn More
  7. DR Kaiser - NC13298/1-2 - Diamond dressing disc's. Pair.
    DR Kaiser - NC13298/1-2 - Diamond dressing disc's. Pair.
    $125.00
    READY TO SHIP - ONLY 1 LEFT IN STOCK!

    Diamond dressing disc's. Pair. Diameter: 8-5/8". Thickness 0.362 overall, 0.180 cutting surface. Beveled. 20 degree - R0.3 - 12/472 Numbers on disc#2: RIX 11590 009ZF17 TN 102295 525045. 8 Mounting holes, 1.56" ID. Two in a padded wooden case, drawing clear taped on top. Weight 19 lbs. Note: Used. DR Kaiser/Munson.

    Learn More
  8. 3M - 048011-32876 - Hardware, abrasive disc. Scotch-Brite 3".
    3M - 048011-32876 - Hardware, abrasive disc. Scotch-Brite 3".
    $2.50
    Hardware, abrasive disc. High strength Disc TSM, A-Medium Grade, Max RPM: 12,000. Has a metal washer for "Roloc" fitting. Learn More
  9. XCELITE - XTD27V - Hand Tool. TORX screwdriver 4-1/2"/(105mm)E.
    XCELITE - XTD27V - Hand Tool. TORX screwdriver 4-1/2"/(105mm)E.
    $6.00
    Hand Tool. TORX screwdriver 4-1/2"/(105mm)E. XTD27V. N/S No 48812. Learn More
  10. SIEMENS - 8WD4308-0DE - Contact Box with Magnetic Base
    SIEMENS - 8WD4308-0DE - Contact Box with Magnetic Base
    $69.00
    Contact Box with Magnetic Base - AnschluBdose mit Magnathalter - Rubber coated Strong magnet 2.6" / 3mm diameter x 1.8" tall. original part number obscured, 2'd charater "W" may be wrong - with four screws. Sealed package before picture was taken. Learn More
  11. Power Components Inc - Power Lift 5B  Actuator- Rack & Pinion Double Lifter - Metric
    Power Components Inc - Power Lift 5B Actuator- Rack & Pinion Double Lifter - Metric
    Special Price $249.98 Regular Price $350.00

    Power Components Inc - Power Lift 5B Actuator - Rack & Pinion Double Lifter - Metric.

    Power Lift Actuators convert Linear to Rotary ~~~ or Rotary to Linear motion when connected with a power source such as a motor or air cylinder.

    Load applications: General Lifting and Long Runs

    Maximum load capacity: 400 pounds (180 kg)

    Maximum shear load: 700 pounds (317 kg)

    Single and double units

    1:1 Gear Ratio

    Round rack units - 35 mm

    Lube-free Premium Unit

    Load applications: high-volume, long runs; heavy power drive units

    Maximum load capacity: 600 pounds (272 kg) 

    Maximum shear load: 1050 pounds (475 kg)

    Note: Work Order Number Stamped W05-3319750001.

    Made in USA - New

    Learn More
  12. BUFFALO DENTAL MFG - 20M - Doriot Straight Handpiece / dental equip
    BUFFALO DENTAL MFG - 20M - Doriot Straight Handpiece / dental equip
    $165.00
    Doriot Two pulley custom straight handpiece dental equip 20,000RPMJapan Learn More
  13. TE Connectivity AMP INC - 69710E -  Premium Crimp Tool, Straight Action "C" head.
    TE Connectivity AMP INC - 69710E - Premium Crimp Tool, Straight Action "C" head.
    Special Price $248.98 Regular Price $385.00

    TE Connectivity AMP INC - 69710E - Premium Crimp Tool.

    Anyone can make a tool to crimp terminals onto a wire. But not everyone can manufacture a tool to
    crimp the terminals properly. Crimp termination of wires isn’t easy. At least, doing it right isn’t easy. We
    know. We started it. TE Connectivity developed the technology of hand crimping over 70 years ago.

    The 69710-1 is a C-Head Straight Action Hand Tool. The tool consists of a head with a stationary die holder and moving die holder and handles with a ratchet. This tool is a member of the CERTI--CRIMP* hand crimping tool family. The ratchet on this tool ensures full crimping of the product. Once engaged, the ratchet will not release until the handles have been fully closed. The interchangeable die sets close in a straight line to minimize contact or terminal rotation during crimping. When applicable, user-assist features such as a contact or terminal locator and a wire stops are built into the die set.

    Straight Action "C" Head.

    Ratcheting. Mod D for Termashield Ferrules.

    Learn More
  14. 3M - 33849-A300 - Hardware, abrasive disc. Trizact - Hook-it.
    3M - 33849-A300 - Hardware, abrasive disc. Trizact - Hook-it.
    $2.00
    Hardware, abrasive disc. Trizact - Hook-it. Dimensions: 127mm x NH (5 in x NH). A300 Grit. Learn More
  15. NORTON - SG H920 - Hardware, sanding disc. 8" Speed-grip.
    NORTON - SG H920 - Hardware, sanding disc. 8" Speed-grip.
    $4.95
    Hardware, sanding disc. 8" Speed-grip (R) 100 Deg F, grit paper. Size: 8" x 1-1/4" 208 x 31.8mm. Premium seeded gel abrasive grain - F-Wt heavy paper backing. Long life, cool cutting. High & consistent cut rate. Tear resistance and ability to withstand high pressure. Normally used on rotary right angle & random orbital (dual-action ) sanders with velcro back up pads. Primarily automotive; blending & intermediate cutting; cleaning and surface prep; dry grinding or sanding; metalworking; portable grinder or handheld; woodworking; vertical shaft grinder. Learn More
  16. NIKKEN - CAT50-ZL12-115U - TAP HOLDER, ADAPTER, CNC, VMC, MILL
    NIKKEN - CAT50-ZL12-115U - TAP HOLDER, ADAPTER, CNC, VMC, MILL
    $50.00
    NIKKEN CAT50-ZL12-115U TAP HOLDER,ADAPTER,CNC,VMC,MILLUSED, QUANTITY 1, CAT 50 SHANK 0-9/16" CAPACITY, EXENSION/COMPRESSION TYPE 10-1/4" OVERALL LENGTH Learn More
  17. Military - 12309303 - Extraction tool. M10-12/99C.
    Military - 12309303 - Extraction tool. M10-12/99C.
    $10.00
    Extraction tool. M10-12/99C. For AN/MS Series connectors. No. 12 and 16. Military NSN 5120-01-349-0750. Learn More
  18. KINGS - KTH-1000 - Tools. Crimper. Used.
    KINGS - KTH-1000 - Tools. Crimper. Used.
    $240.00
    Tools. Ratchet crimp tool. Interchangeable die frame. For use with 75 Ohm BNC connectors. Used, excellent condition. Complete in manufactures protective case. Rohs compliant. Learn More
  19. HEMPE - 6-411 - Classic wooden hand screw clamp.
    HEMPE - 6-411 - Classic wooden hand screw clamp.
    $19.99
    Classic wooden hand screw clamp. Material: Maple with walnut inlay and handles. Limited edition. Numbered classic tool collection. Portable vise. Approximately: 10" x 17". Learn More
  20. Xcelite Cooper Tools  - 990063 - KT-WIR990063 - Wire Wrap,  Cut-Strip-Wrap Bit, 30 AWG.
    Xcelite Cooper Tools - 990063 - KT-WIR990063 - Wire Wrap, Cut-Strip-Wrap Bit, 30 AWG.
    Special Price $48.98 Regular Price $85.00

    Xcelite Cooper Tools - 990063 - KT-WIR990063 - Wire Wrap Tools.

    Status: Discontinued

    Wire Type OFHC

    Wire Size 30 AWG

    3.25"x.50" Cut Strip

    Min/Max Terminal Diagonal 0.030/0.034"

    Terminal Hole Depth 1".

    Also Apex Tool Group 990063

     

    Learn More
  21. Cooper Tools - 511395 - 30 GAUGE WW insert
    Cooper Tools - 511395 - 30 GAUGE WW insert
    $25.00
    Wire Wrap tool/insert - just over 3" long. Learn More
  22. Cooper Tools - 508824 - Tools, Cam. Wire-Wrap.
    Cooper Tools - 508824 - Tools, Cam. Wire-Wrap.
    Special Price $24.98 Regular Price $34.85

    Cooper Tools - 508824 - Tools, Cam. Wire-Wrap.

    UPC 037103956699

    Learn More
View as List Grid

Items 1-24 of 51

Page
per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.