Machines & Tools

Milling Tool Holder 18mm bore, 36mm SHANK, 18mm Bore. 5-1/4" Overall Length. Arbor. Learn More

Nutrunner cable. Connector assembly. 18/5C-slhd + 22/4C-SHLD + 22/11C O/A Shield, 300V 90 Deg C. With attached heavy duty M-F 20 position connector. Length 5 Meter. Note: Fits - Atlas Copca. Alt P/N: TPC74705 or 23923-09. More info: http://www.tpcwire.com/images/TPC_Catalog/23_Nut_Runner_Assemblies.pdf Learn More

Massive 9.45 pound Fixture on 1" steel shaft 2.3" long.3.94" diameter x 4.2" high excluding shaft. Marked: FETTE Nr E 10-177 (Adjustable 0 - 8 units, about 1.5") attached by three 0.63"dia rods to the best part: E 10A01 X106 M8-M10 3/8 Feingewinde 8-14mm 5/16 - 9/16. Made in Germany - Impressive! with various small tools, allen wrenches, etc. Learn More

Diamond dressing disc's. Pair. Diameter: 8-5/8". Thickness 0.362 overall, 0.180 cutting surface. Beveled. 20 degree - R0.3 - 12/472 Numbers on disc#2: RIX 11590 009ZF17 TN 102295 525045. 8 Mounting holes, 1.56" ID. Two in a padded wooden case, drawing clear taped on top. Weight 19 lbs. Note: Used. DR Kaiser/Munson.

Learn More

Power Components Inc - Power Lift 5B Actuator - Rack & Pinion Double Lifter - Metric.

Power Lift Actuators convert Linear to Rotary ~~~ or Rotary to Linear motion when connected with a power source such as a motor or air cylinder.

Load applications: General Lifting and Long Runs

Maximum load capacity: 400 pounds (180 kg)

Maximum shear load: 700 pounds (317 kg)

Single and double units

1:1 Gear Ratio

Round rack units - 35 mm

Lube-free Premium Unit

Load applications: high-volume, long runs; heavy power drive units

Maximum load capacity: 600 pounds (272 kg) 

Maximum shear load: 1050 pounds (475 kg)

Note: Work Order Number Stamped W05-3319750001.

Made in USA - New

Learn More

Nutrunner head, 17mm. New. Learn More

Doriot Two pulley custom straight handpiece dental equip 20,000RPMJapan Learn More

TE Connectivity AMP INC - 69710E - Premium Crimp Tool.

Anyone can make a tool to crimp terminals onto a wire. But not everyone can manufacture a tool to
crimp the terminals properly. Crimp termination of wires isn’t easy. At least, doing it right isn’t easy. We
know. We started it. TE Connectivity developed the technology of hand crimping over 70 years ago.

The 69710-1 is a C-Head Straight Action Hand Tool. The tool consists of a head with a stationary die holder and moving die holder and handles with a ratchet. This tool is a member of the CERTI--CRIMP* hand crimping tool family. The ratchet on this tool ensures full crimping of the product. Once engaged, the ratchet will not release until the handles have been fully closed. The interchangeable die sets close in a straight line to minimize contact or terminal rotation during crimping. When applicable, user-assist features such as a contact or terminal locator and a wire stops are built into the die set.

Straight Action "C" Head.

Ratcheting. Mod D for Termashield Ferrules.

Learn More

Laser assembly, actuator arm. Electromagnetic relay, high voltage. PK test contacts: 40KV. PK Test to Gnd: 40KV. Actuator: 115V/50-60Hz. Solenoid model: E40-DT-40-0-15-BD. Serial Number 020923-7. Note: base must be grounded. Learn More

Tools. Ratchet crimp tool. Interchangeable die frame. For use with 75 Ohm BNC connectors. Used, excellent condition. Complete in manufactures protective case. Rohs compliant. Learn More

Durant / Eaton - 5-T-8-1-AC - Lineal Counter Ratio 1.5:1 w/ Reset

Eaton's mechanical totalizers are available in a variety of heavy-duty configurations for applications when power is unavailable.

Accurate counting without need for power

5-Digit Lineal Counter, Ratio 1.5:1 with Thumbscrew Reset.

Black digits with white background

Dual shaft, top and bottom.

Base mount

UPC:782114011522

Dimensions: Height: 1.875 IN, Length: 3.375 IN, Width: 3.6875 IN

Weight:.5 LB

 

New

Learn More

Pneumatic Impulse Wrench 3/8" - new in dirty box - only weighs 3.7-pounds 10-inches long. Marked with large red 2, Blade Impulse. Made in Japan with lots of Japanese technical info. Learn More

Eprom Eraser/Cabinet. NIB. High volume production model. Learn More

SPECTRONICS - PC3300A/UK EPROM Eraser/Cabinet.

 High volume production model.

252 Chip capacity.

Accepts metric cards, silicon wafers and PC boards.

Inside Tray: 822mmW x 305mm l x 35mm High.

New In Box.

Learn More

Eprom Eraser/Cabinet. High volume production model. 252 Chip capacity. Inside Tray 62cmW x 30cmL x 3.5cmH. Weight: 52 lbs. Learn More

Tool kit. New. Learn More

Puck tool calibration kit. New. Learn More

Chuck, milling. Ultra-Lock. CNC. Capacity: 0.187-1.250". Shank: CAT 50. Collett: KM 1-1/4. 10.25"L overall. With (1) 1 3/4" end mill. Weighs 12 lbs unpacked. Learn More

MIDDEX ELECTRONIC - WKR 22 - WKR-22-120 - TOOL SENSOR

For Systems WK1T, WK4T, WTK Scanning

Range:120 Sensor

Connections: 4 Pin

Absolutely leak proof in the most demanding environment

Fast and constant scanning speed

Sensor diameter only 22mm

Scanning direction right or left

Object, tool, and free space scanning

PNP outputs, wear resistant, short protected

NPN outputs, wear resistant, short protected

Inverting of outputs via DIP switch

Output latching until new scanning cycle

WKR22-120 = WKR-S120 9023

New 

Learn More