Machines & Tools
- VALENITE - VPBPC6-PC3R3 - Milling Tool Holder 18mm bore$169.88Milling Tool Holder 18mm bore, 36mm SHANK, 18mm Bore. 5-1/4" Overall Length. Arbor. Learn More
- TREX-ONICS - 74705 - Nutrunner cable. 20 Conductor.$178.88Nutrunner cable. Connector assembly. 18/5C-slhd + 22/4C-SHLD + 22/11C O/A Shield, 300V 90 Deg C. With attached heavy duty M-F 20 position connector. Length 5 Meter. Note: Fits - Atlas Copca. Alt P/N: TPC74705 or 23923-09. More info: http://www.tpcwire.com/images/TPC_Catalog/23_Nut_Runner_Assemblies.pdf Learn More
- FETTE - E10A01X106 - E10-177 FETTE Nr E 10-177$175.00Out of stockMassive 9.45 pound Fixture on 1" steel shaft 2.3" long.3.94" diameter x 4.2" high excluding shaft. Marked: FETTE Nr E 10-177 (Adjustable 0 - 8 units, about 1.5") attached by three 0.63"dia rods to the best part: E 10A01 X106 M8-M10 3/8 Feingewinde 8-14mm 5/16 - 9/16. Made in Germany - Impressive! with various small tools, allen wrenches, etc. Learn More
- Power Components Inc - Power Lift 5B Actuator- Rack & Pinion Double Lifter - MetricSpecial Price $249.98 Regular Price $350.00
Power Components Inc - Power Lift 5B Actuator - Rack & Pinion Double Lifter - Metric.
Power Lift Actuators convert Linear to Rotary ~~~ or Rotary to Linear motion when connected with a power source such as a motor or air cylinder.
Load applications: General Lifting and Long Runs
Maximum load capacity: 400 pounds (180 kg)
Maximum shear load: 700 pounds (317 kg)
Single and double units
1:1 Gear Ratio
Round rack units - 35 mm
Lube-free Premium Unit
Load applications: high-volume, long runs; heavy power drive units
Maximum load capacity: 600 pounds (272 kg)
Maximum shear load: 1050 pounds (475 kg)
Note: Work Order Number Stamped W05-3319750001.
Made in USA - New
Learn More -
- Honeywell/Microswitch - CRS301 - Color Recognition Sensor, NewSpecial Price $369.89 Regular Price $479.00
Honeywell/Microswitch - CRS301 - Color Recognition System.
Designed for the industrial environment, not just the laboratory bench. Accurately memorizes up to eight different colors for recognition on-line. Sensitive across the entire visible light spectrum 400 to 800 nanometers to characterize colors, not just red, blue & green. Internal light source. Current sink/source output provided for each channel.
400-800nM, 8-Channels.
Color Recognition Sensor with MS-Connector Cable
4 armoured 32" Fiber Optic cables: CRS-FO-25-3 (bifurcated CRS-FO-55-TSR-3, CRS-FO-55-TSE-3, and CRS-FO-55-3 (bifurcated).
3.5" Disk CRS 301-CFG-SFT V2.10 Software.
S/N 00058
New Old Stock - Made in USA - 9042
Learn More - BUFFALO DENTAL MFG - 20M - Doriot Straight Handpiece / dental equip$165.00Doriot Two pulley custom straight handpiece dental equip 20,000RPMJapan Learn More
- TE Connectivity AMP INC - 69710E - Premium Crimp Tool, Straight Action "C" head.Special Price $248.98 Regular Price $385.00
TE Connectivity AMP INC - 69710E - Premium Crimp Tool.
Anyone can make a tool to crimp terminals onto a wire. But not everyone can manufacture a tool to
crimp the terminals properly. Crimp termination of wires isn’t easy. At least, doing it right isn’t easy. We
know. We started it. TE Connectivity developed the technology of hand crimping over 70 years ago.The 69710-1 is a C-Head Straight Action Hand Tool. The tool consists of a head with a stationary die holder and moving die holder and handles with a ratchet. This tool is a member of the CERTI--CRIMP* hand crimping tool family. The ratchet on this tool ensures full crimping of the product. Once engaged, the ratchet will not release until the handles have been fully closed. The interchangeable die sets close in a straight line to minimize contact or terminal rotation during crimping. When applicable, user-assist features such as a contact or terminal locator and a wire stops are built into the die set.
Straight Action "C" Head.
Ratcheting. Mod D for Termashield Ferrules.
Learn More - Synchron Laser Service - 104500-011 - Laser assembly, actuator arm.$350.00Out of stockLaser assembly, actuator arm. Electromagnetic relay, high voltage. PK test contacts: 40KV. PK Test to Gnd: 40KV. Actuator: 115V/50-60Hz. Solenoid model: E40-DT-40-0-15-BD. Serial Number 020923-7. Note: base must be grounded. Learn More
- KINGS - KTH-1000 - Tools. Crimper. Used.$240.00Tools. Ratchet crimp tool. Interchangeable die frame. For use with 75 Ohm BNC connectors. Used, excellent condition. Complete in manufactures protective case. Rohs compliant. Learn More
- Durant / Eaton - 5-T-8-1-AC - Lineal Counter Ratio 1.5:1 w/ ResetSpecial Price $229.98 Regular Price $350.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
Durant / Eaton - 5-T-8-1-AC - Lineal Counter Ratio 1.5:1 w/ Reset
Eaton's mechanical totalizers are available in a variety of heavy-duty configurations for applications when power is unavailable.
Accurate counting without need for power
5-Digit Lineal Counter, Ratio 1.5:1 with Thumbscrew Reset.
Black digits with white background
Dual shaft, top and bottom.
Base mount
UPC:782114011522
Dimensions: Height: 1.875 IN, Length: 3.375 IN, Width: 3.6875 IN
Weight:.5 LB
New
Learn More - Yokota - YX-500C - Impulse Wrench, angle head - new$229.00Pneumatic Impulse Wrench 3/8" - new in dirty box - only weighs 3.7-pounds 10-inches long. Marked with large red 2, Blade Impulse. Made in Japan with lots of Japanese technical info. Learn More
- SPECTRONICS - PC4400A/UK - Eprom Eraser/Cabinet.$250.00Eprom Eraser/Cabinet. NIB. High volume production model. Learn More
- SPECTRONICS - PC3300A/UK - Eprom Eraser/Cabinet.Special Price $249.98 Regular Price $350.00
SPECTRONICS - PC3300A/UK EPROM Eraser/Cabinet.
High volume production model.
252 Chip capacity.
Accepts metric cards, silicon wafers and PC boards.
Inside Tray: 822mmW x 305mm l x 35mm High.
New In Box.
Learn More - SPECTRONICS - PC3300A/F - Eprom Eraser/Cabinet.$250.00Eprom Eraser/Cabinet. High volume production model. 252 Chip capacity. Inside Tray 62cmW x 30cmL x 3.5cmH. Weight: 52 lbs. Learn More
- NIKKEN - CAT50-C1-1/4H-105U - Chuck, milling. Ultra-Lock. CNC$274.88Chuck, milling. Ultra-Lock. CNC. Capacity: 0.187-1.250". Shank: CAT 50. Collett: KM 1-1/4. 10.25"L overall. With (1) 1 3/4" end mill. Weighs 12 lbs unpacked. Learn More
- MIDDEX ELECTRONIC - WKR 22 - WKR-22-120 - TOOL SENSOR for Systems WK1T, WK4T, WTKSpecial Price $249.98 Regular Price $350.00
MIDDEX ELECTRONIC - WKR 22 - WKR-22-120 - TOOL SENSOR
For Systems WK1T, WK4T, WTK Scanning
Range:120 Sensor
Connections: 4 Pin
Absolutely leak proof in the most demanding environment
Fast and constant scanning speed
Sensor diameter only 22mm
Scanning direction right or left
Object, tool, and free space scanning
PNP outputs, wear resistant, short protected
NPN outputs, wear resistant, short protected
Inverting of outputs via DIP switch
Output latching until new scanning cycle
WKR22-120 = WKR-S120 9023
New
Learn More