Machines & Tools
- Edwards Signaling Products - CS1088 - 876-N5 - Alarms. Security Horns, 103dB loud, 120VAC.Special Price $74.99 Regular Price $120.95READY TO SHIP - ONLY 30 LEFT IN STOCK!
Edwards Signaling Products - CS1088 - 876-N5 - Audible Alarm.
Security horns, 103dB loud,
120VAC 0.13A 14VA 150-ohm coil.
Case: 4.5" square.
Enclosures sold separately. Attached pictures show what is included.
Weight: 1.4 lbs.
UPC 093871220332
Learn More - UNITEK - 1-124-04 - Unibond Welding Power Unit - for partsSpecial Price $34.95 Regular Price $45.00Out of stockUnibond Welding Power Unit - for parts only, missing discharge capacitors and maybe more. Learn More
- 3M - CTC330-WW - Iron Man Monitor for Soldering Iron Workstation$74.88Iron Man Overvoltage Soldering Iron Workstation Monitor. Whenever a soldering iron, tweezers or other type tool touches the grounded pad of a board, the 3M Iron Man Monitor will alarm if overvoltage on the board is detected. High or Low selectable alarms: High sensitivity 0V to +/-5V. Low sensitivity 0V to +/-50V. Complete with universal 120/240Vwall adapter power supply and instructions. P/N 80-0009-1885-6. Learn More
- SIEMENS - 8WD4308-0DE - Contact Box with Magnetic Base$69.00Contact Box with Magnetic Base - AnschluBdose mit Magnathalter - Rubber coated Strong magnet 2.6" / 3mm diameter x 1.8" tall. original part number obscured, 2'd charater "W" may be wrong - with four screws. Sealed package before picture was taken. Learn More
- LANE PUNCH CORP - BRHT-13 - Tru-Lock Ball-Lock Retainer Heavy-Duty$55.88Ball-Lock Retainer Heavy-Duty (BRHD) Tu-Lock TM Conforms to NAAMS-ISO Triangular nitride treated. Simple typical mounting: 1. Drill and tap for two (2) screws. 2. Drill and ream (or bore) for dowels. 3. Insert dowels into die plate, slip retainer onto dowels and tighten screws. 50x48mm x 41mm-high provide their user improved performance. Feature positive lock to retainer. Reduce maintenance and downtime. Prevent stripper from falling into die during use. Fit both Ball-Lock and Shoulder punches. Learn More
- TEK Industries - TEK Commander 810120 - Programmable Digital Event Timer. 120/240 VAC 30 AmpREADY TO SHIP - ONLY 50 LEFT IN STOCK!
TEK Industries - TEK Commander 810120 - Programmable Digital Event Timer. 120/240 VAC 30 Amp
Tek Commander 810120, Commercial Quality, Digital event timer programmable to the second spread over a repeatable 24 hour cycle. Output relay with normally-open, 30 amp/277 VAC contact. Operation: 120/240 VAC. Bright yellow 4-digit LED display cycles between 24-hour time and set event status with indicators for each. Weather resistant packaging in 4-inch square plastic housing and 4-button membrane programming buttons.
Digital event timer is programmable to the second with weekly cycles.
Great for automatically controller your pool and/or hot tub filter.
Detailed Operating Manual
Made with Pride In the USA
- NIKKEN - CAT50-ZL12-115U - TAP HOLDER, ADAPTER, CNC, VMC, MILL$50.00NIKKEN CAT50-ZL12-115U TAP HOLDER,ADAPTER,CNC,VMC,MILLUSED, QUANTITY 1, CAT 50 SHANK 0-9/16" CAPACITY, EXENSION/COMPRESSION TYPE 10-1/4" OVERALL LENGTH Learn More
- NIKKEN - CAT50-MMC, 8-105U - Coolant Mini-Mini Chuck, VMK08.$50.00Coolant Mini-Mini Chuck, VMK08. Cat 50 shank type, 9-3/4" overall length. Used. Learn More
- MODICON / AEG - AS-S902-171 - 984 Series EXEC I/O MODULE only - PROM CARD for AS-S902-171, NewSpecial Price $74.98 Regular Price $124.95READY TO SHIP - ONLY 2 LEFT IN STOCK!
MODICON / AEG - AS-S902-171 - EXEC. I/O MODULE 984 Series PROM COMB.
1010 for Modicon Modbus Plus AS-S902-171.
New, in Bag.
Sealed Module has Gold Plated PC Card.
New - Made in USA
Learn More - Xcelite Cooper Tools - 990063 - KT-WIR990063 - Wire Wrap, Cut-Strip-Wrap Bit, 30 AWG.Special Price $48.98 Regular Price $85.00Out of stock
Xcelite Cooper Tools - 990063 - KT-WIR990063 - Wire Wrap Tools.
Status: Discontinued
Wire Type OFHC
Wire Size 30 AWG
3.25"x.50" Cut Strip
Min/Max Terminal Diagonal 0.030/0.034"
Terminal Hole Depth 1".
Also Apex Tool Group 990063
- Cooper Tools - 505A - Tools. Pliers, for inserting/extracting.$37.88Tools. Pliers, for inserting/extracting, straightening and cutting of ICs and SMDs. Size: 32mm x 120mm. Spring loaded foam-padded handle. Material: high grade steel, anti glare finish, ESD safe. Manufactured by Erem for Cooper. More info: http://www.cooperhandtools.com/europe/sales_literature/documents/EremCat_2004_GB_000.pdf Learn More
- APEX - UG-MB-13MM25 - Tools. Wrench with U-Guard cover.$79.99Tools. Wrench with U-Guard cover. Learn More
- APEX - UG-M-21MM15 - Tools. Wrench with U-Guard cover.$69.00Tools. Wrench with U-Guard cover. Learn More
- APEX - UG-M-18MM15 - Tools. Wrench with U-Guard cover.$64.99Tools. Wrench with U-Guard cover. Learn More
- APEX - UG-M-13MM15 - Tools. Wrench with U-Guard cover.$59.00Tools. Wrench with U-Guard cover. Learn More
- SPECTRONICS - PE-140/F - 230V 50 Hz New 9-Eprom UV Eraser$95.00230V 50 Hz UK-plug New Eprom eraser , will handle up to 9 24-pin ic's. Learn More
-
- SIEMENS-ELEMA AB - 6828552 - Puck tool calibration kit.$100.00Puck tool calibration kit. New. Learn More
- Honeywell / Klockner-Moeller - 620-0060 VR1.1 - 620 Communication Module$85.00620 Communication Module VR1.1 Learn More
- FOWLER - 52-570-000 - UNIVERSAL MICROMETER TEST KITSpecial Price $79.95 Regular Price $99.8812-Piece MICROMETER SET 0.001" 1.5"OD dial that goes around 2.6 times when pushing the gage sensor on back, and goes back home after pressure is released and measurement duly noted. - with extensions and a C-mount clamp 'n other neat stuff - in a compact carrying case 7X4X2" - looks perfect but sold As-Is Learn More
- Cooper Tools/Weller - EC255B - Power Cord Handle assembly. For EC1503B.Special Price $32.98 Regular Price $42.50
Cooper Tools/Weller - EC255B Power Cord.
Status: Discontinued
Weller Brand Replacement Cord and Handle for EC1503B.
Non-burnable silicon rubber cord.
Lightweight, High Impact Thermo-Plastic Handle
Meets Requirements for ESD,
Electrostatic Dissipationg Materials.
NIB.
Learn More - Weller - SPG80-H - Soldering tools. Stained glass iron. NewSpecial Price $36.98 Regular Price $48.50READY TO SHIP - ONLY 1 LEFT IN STOCK!
Weller - SPG80-H Soldering tools. Stained glass iron. New. Note: N/S No. 47662.
A great iron for beginners and professional artists alike, this iron is ready for intricate seams required for making stained glass projects. This iron is simple and safe to use; an indicator light shows at a glance if the iron is on. Packs 80 watts of power. To maintain the proper temperature, a temperature control unit is suggested. Comes with TWO TIPS: a 3/8" and 1/4". UL listed.
- Soldering iron for stained glass projects and repairs
- Simple and safe; light indicator lets you know if on
- Includes two soldering iron tips
- 80 watts
- Includes 3/8" and 1/4" tips
- Features on/off indicator light
- A temperature controller is recommended for maintaining proper temperature
- Ungar - 750 - Soldering equipment. Cord set 3 wire grounded 120V AC/DC.$34.50Out of stockSoldering equipment. Cord set 3 wire grounded 120V AC/DC. Note: OSHA grounded. Learn More
- Wahl - 7500 - Soldering equipment. Iso-Tip, cordless soldering iron.$49.95READY TO SHIP - ONLY 1 LEFT IN STOCK!Soldering equipment. Iso-Tip, cordless soldering iron. Complete with charging station. New. Wahl Clipper Corp. Made in the USA. Note: Soldering tip required, not included. Learn More