Miscellaneous

PANASONIC WM-034CY - WM-034 - Audio, Microphone Cartridge.

Omnidirectional Electret Condenser Cartridge.

Part Status : Discontinued

Electret Condenser, Omnidirectional 42db +/-3db.

Frequency Range: 20Hz to 16kHz.

Impedance: 2.2K Ohm. (2200 Ohms)

Sensitivity: -62+/- 3dB

Signal Noise Ratial: 60 dB

Voltage: 4.5VDC, Voltage Range: 4.5 to 10V  (Vs)

Current: 800uA.

Output Type: Analog.

Dimensions: Circular 9.7mm Diameter x 6.7mm thick. (0.382" X 0.264")

Through hole Radial PCB mount, 2.54mm (0.100") standard pin spacing.

Termination: Solder Pads.

Applications: Useful for almost any type telephone and other applications.

Alternates: P9992-ND, CTI 42059, YPM-CH022, V79CH

Made in Japan

Kyocera - KBR-4.00L - Crystal, Ceramic Resonator.

Status: Discontinued

Frequency: 4.0MHz.

Supply Voltage: 5 V

Tolerance: 0.5%

Temperature: -20 C to 80 C

Case: Radial Leads (2 leads).

Mount: PCB. Dimensions: 8.0mm long x 3.1mm wide x 6.4mm high.

Lead spacing: 5.0mm.

New.

Note: From 500/manufacture bag bulk.

Alternate: Mouser 581-KBR-4.00MKS

Package of 10

Keystone - 232-M - Battery Clip 9V, Snap-on Connector.

When product cost is of the utmost importance these economy battery straps will suit your needs. Brass contacts, nickel plated with vinyl or ABS covering. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires meet UL/CSA #1007 requirements.

Battery accessories.

Color Coded

Battery clip 9V, Snap-on.

Vinyl Base Size: 1.125 (31.8) × .530 (13.5

Black with color coded 4" or 5" leads.

New Old Stock

Package of 10.

UID - 2TS1 / Keystone 4609 - TO-3 Isolated Transistor / Component Socket.

Socket is installed onto chassis using eyelets or screws. Transistor is installed afterwards. Assembly and repairs are simplified since socket will stay in place without transistor mounted. white Insulator ensure the component leads are electrically isolated from chassis.

Electrically Isolated Power Transistor Socket

Status: Discontinued

Dimensions: 1.35" x 1.0" X 0.086"

Contacts: Brass, Tin Plated

Three Solder Terminals, Mounting Holes in each Corner.

Tan Phenolic with White Nylon Insulator on Opposite.

Identified: "E", "B", "C" on Phenolic Surface.

Alternates: Keystone 4609, ECG209, NTE209, Cinch 2TS-1

Applications: Vintage Audio, Amplifiers, Phase Linear & Others

Vintage New Old Stock

Made In USA

RADIO SHACK/ Rubber Duck - Flexible Replacement Antenna

M8 x 1.0 Metric Thread Mount.

Overall Length including Threaded Monut is 6 1/2".

New Old Stock.

Plus 50 Lens, extension.

Optical diffuser.

For X-band radar (antenna) detector.

Dimensions: 2.45" D x 0.68", plus 2 0.33" mounting tabs.

COLECO - 8-940 Music Box Movements

Believe tune is "Merry Widow Waltz"

Manual wind-up.

Made in Japan

Vintage - New Old Stock 

ATX - ACU-1- Indoor Twin Lead Antenna Matching Transformer, FM/VHF/UHF Balum Splitter

• Converts television terminal connection to F-type connector
• 75-300-Ohm Impedance Matching Balun
• Frequency 5~900 MHz UHF-VHF-FM
• Suitable for Indoor Applications
• 3-Capacitor Circuitry
• Insertion Loss 1-2 dB typical
• Return Loss 16 dB min
• DC Power Blocking
• Firmly Staked F-Connector to Housing
• Machined Brass F Connector Port
• Shielded Housing

75 Ohm oax to 300 Ohm Twin Lead.

Mini Matching Transformer.

Alternate: Archer 15-1140A

Quality - New Old Stock - Made in Taiwan

Unidentified MFG - 5-002 - Audio Equipment.

Piezo speaker with phone pick up coil.

All attached to a 6 ft cord and two 1/8" male mono plugs.

New Old Stock

Uniden - ANT 39 - 5-048 - Antenna Telescoping 10.5" Screw Base

Screw Base (13.5 INCHES TOTAL)

Chrome Plated.

Five (5) Sections

Dimensions: 3 7/16" = Closed, 10 1/2" = Open

With Screw Base.

Color: Silver Tone

With Brass Base Stud.

Corrosion Resistant

Note: Superior in performance, durability and more envionmentally tolerant than inexpensive steel or aluminum Chinese look-a-like antennas often seen On-Line, eBay or Amazon.

New Old Stock - Proudly Manufactuered in USA

Applications: Compatible with many Radios, Automobile/Marine, Telephone, Television, Indoor Portable Radio, FM Radio, Home Stereo Receiver, AV Audio Video Home Theater Receiver, TV Converter Box, TV Tuner Receiver, Home and Office GSM Alarm System, Wireless Security Sensor Motion Detector Alert, Remote Control Toy Model, Frequency Meter Counter.

POLYCASE PRODUCTS -  B15-OP8MX  -  8 Pin Circulr Connector, Octal Base.

Relay / Electron Tube Square Base

8-Pin Octal Base Connector

Material: Thermal Plastic

New Old Stock

Square Base Dimensions 1.50" X 1.50"

Applications: Square D, Schneider, Eaton, Cutler Potter Relays 

Mitsubishi AWA - 641B093010 or 641B09301 Hardware, Gear, VCR Cam Gear.

Cam-Gear-A for Mitsubishi, Elerohome, Emerson VCRs and others. 

Material: Nylon.

Diameter: (1-5"), 371.mm D x 8.5mm thick, with a 2.9mm Diameter hole for shaft.

Genuine Mitsubishi Part - New Old Stock.

Mitsubishi Electronic Parts HS306 VP-0386

Alternate: GR9301

Note: Component part of IW33 loading cam gear.

Model Applications: AV12, AV14, AV20, AV400, AV410, AV51, AV52, HS306, HS307, HS318, HS319, HS400, HS410, TR102, VA92 Idler/Capstan Drive.

Made in Japan

Herman Smith Inc - 1109 Switch, slide.

Contacts: 3PDT.

Contact Ratings: 3Amp 125VAC, 0.5Amp DC.

Connection: solder.

Mech: PCB or Panel.

Body: 22.4mm long x 18.2mm wide x 7.8mm behind panel, plus contacts.

Flange is 35.7mm long with two holes at 28.4mm centers.

Note: Travel 3.6mm.

This switch is reportedly used on certain Guitars.

General Electric - NE-20 - Stock # 2Z 5893-1 - Neon Glow Lamps & Lights.

Voltage: 105-120VAC

Output: 1/25 watt.

NE-20.

Base: T2 Bayonet, Twist and Turn Installation.

Vintage Genuine General Electric - WWII - New Old Stock

Made in USA

Keystone Electronics - 184 - 30 Volt Battery Holder, Aluminum New

An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Recommended for use where shock or severe vibration is encountered. 

Clips: Spring Steel, Nickel Plate

Phenolic Base: Type PBE, Per MIL-P-3115C

Contact Eyelets: Brass, Nickel Plate

Frame and Clips: Aluminum 2024-T3

Insulating Washers: Moisture Proof, Resin Impregnated Fibre

Solder Lugs: Brass, Tin Plate

Numer of Cells: 2

Mounting Type: Chassis Mount

Termination Style: Solder Lugs

Battery Cell Size: 2/3A

Battery Holder Dimensions: See Attached Illustration.

Two mounting holes on Bottom 1.912" Spacing.

Chassis Mount.

Solder Lug Terminals.

Heavy Duty - New Old Stock.

Made in USA

Battery Cross Reference: Eveready 413, NEDA 210 

Alternates: Digi-Key 36-184-ND, Mouser 534-184, Newark 35F1638

SWITCHCRAFT - 6-369

3 PIN XLR (M)

METAL HOUSING RIGHT ANGLE

PC TERMINALS

SIMILAR TO E3MRA

Genuine Switchcraft - New Old Stock

Applications: Microphone 

Keystone Electronics - 2173 - Rugget Steel Battery Holder, Cylindrical.

An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Retainer clips are available to lock batteries in place and prevent shifting or loosening. Recommended for use where shock or severe vibration is encountered. 

• Ideal for NiCd, Alkaline, NiMH, Carbon, Zinc and Lithium Cells
• Corrosion Resistant, Nickel Plate
• Brass Contacts, Nickel Plate
• Moisture Proof Resin Impregnated, Fibre Insulating Washers

Single "C" Cell Battery Holders

Battery Cross Reference ICE LR14, ANSI/NEDA 14A

Battery Dimensions: Diameter 0.531"- 0.565" X Length 1.906" - 1.988" (13.4-14.5mm X 48.4-50.5mm)

2100 Series with Insulated Contacts from Metal Housing.

Two mounting holes on Bottom 1.34" Spacing.

Chassis Mount.

Solder Lug Terminals.

Heavy Duty - New Old Stock.

Alternates: Digi-Key 36-2173-ND, 2224, 36-224-ND