Electrical, Electronic
& Electromechanical
Supplies - (440) 205-8388

Search Site

DC

36 Item(s)

per page

List  Grid 

Set Descending Direction
  1. JOHNSON ELECTRIC ENGINEERING Ltd - HC615LG - Motor, DC. Reversible PM 6-18VDC.

    JOHNSON ELECTRIC ENGINEERING Ltd - HC615LG - Motor, DC. Reversible PM 6-18VDC.

    Regular Price: $5.95

    Special Price $5.00

    Only 5867 left in stock!

    Motor, DC. Reversible PM 18VDC, 100mA, 3500 RPM no load. Torque constant: 49.4 m/Nm/Amp. Dy. Res: 6.84 ohms. Motor Regulation: 28RPM/m-NmTorque: 126m-Nm 2.63Amp at stall. Maximum efficiency: 68%. Torque: 20m-Nm, speed: 2944RPM, current: 0.51Amp, output: 6.17 watts. Maximum power: Torque: 62m-Nm, speed: 1753RPM, current 1.37A. Output: 11.47 watt. Shaft Length: 11mm 0.435", shaft diameter: 3.1mm 0.125". Has an attached pulley: 10mm 0.39" inside diameter x 4.6mm 0.18" inside length. Motor: 38mm 1.495" D x 83mm 3.27" long overall. Rotation: clockwise when viewed from shaft output end with positive applied to positive. Weight: 8 oz. Note: PM = Permanent magnet. Learn More
  2. ESCAP - 23-D-21-213-B2X2 - Motor, DC. Supply: 1-36VDC.

    ESCAP - 23-D-21-213-B2X2 - Motor, DC. Supply: 1-36VDC.

    $24.95

    Only 190 left in stock!

    Motor, DC. Supply: 1-36VDC. Speed: 100 to 12000. Mech. Mtg: Two holes for the motor and six holes/pins for feedback information. Body Dimensions: 23mm D x 60mm, plus shaft - 3mm D x 20mm long. Note: Precision DC Motor & Tachometer. Specification sheet available. Learn More
  3. MERKLE-KORFF - EYQM-63264-15-2 - Motor, PM. 12VDC reversible, 8400RPM.

    MERKLE-KORFF - EYQM-63264-15-2 - Motor, PM. 12VDC reversible, 8400RPM.

    $9.99

    Only 546 left in stock!

    Motor, PM. Ratings: 12VDC reversible, 8400RPM no load. Works on 2V and above 1.2"OD x 2.75" with magnetic tachometer 5500rpm under a light load. Tc: 1.6 oz-in. Ts: 7 oz-in. Kt:1.94 oz-in/A Po 7.7W Rt:4.65-OHM. No info on the tachometer. Motors are marked S0878B. Weight: 5 oz. Note: Some may have a 7.7mm brass gear with 8 teeth. Learn More
  4. Buehler - 1.13.043.218-9 - Motor, DC PM. Supply: 3-24VDC.

    Buehler - 1.13.043.218-9 - Motor, DC PM. Supply: 3-24VDC.

    $9.95

    Only 189 left in stock!

    Motor, DC PM. Supply: 3-24VDC. Wire count: 23 inch twisted pair leads. Body Dimensions: 1.58"D x 4.16"Long overall. Shaft Dimensions: 3.9mm shaft and attached pulley 0.32"ID. Note: 19.1VDC Reversable High-efficiency Motor. 50-100mA. 1.13.043.218-9 3140-0858. Learn More
  5. Buehler - 13.65.36 - Motors, DC. 6-24VDC, tach output.

    Buehler - 13.65.36 - Motors, DC. 6-24VDC, tach output.

    $17.97

    Only 134 left in stock!

    Motors, DC. High speed permanent magnet motors 6-24VDC, tach output. Disc drive replacement 10,000 RPM MAX. 2-IN-OZ. Dimensions: 1.38" D x 2.7" long, with pulley on shaft. Also useful as generator / wind speed indicator anemometerand science fair projects. Weight: approximately 8 oz. Learn More
  6. Buehler - 507104 series - Motor, DC. Supply: 6 - 24VDC 200-300mA.

    Buehler - 507104 series - Motor, DC. Supply: 6 - 24VDC 200-300mA.

    $14.95

    Only 84 left in stock!

    Motor, DC. Supply: 6 - 24VDC 200-300mA. Torque: relatively high. Direction: Reversible by switching polarity. Wire count: Two 16" long wires with connector. Body Dimensions: 40mmD x 64mmL. Shaft Dimensions: 4mm shaft 19mm long and flattened shaft 20mm long. Weight: 9 oz. Learn More
  7. ESCAP - PL-11-219-119 Series28 - Motor, DC. Supply: 3VDC 50mA.

    ESCAP - PL-11-219-119 Series28 - Motor, DC. Supply: 3VDC 50mA.

    $19.00

    Only 199 left in stock!

    Motor, DC. Supply: 3VDC 50mA. Body Dimensions: 28mm OD each motor. Assembly: 6 x 5 x 3". Note: Data cassette drive. Pair of precision motors. Series: 28. MFE 250BA 10-IPS 8000-BPS. Learn More
  8. JOHNSON - 1342284 - Motor, PM DC reversible 9-15VDC.

    JOHNSON - 1342284 - Motor, PM DC reversible 9-15VDC.

    $3.75

    Only 653 left in stock!

    Motor, PM DC, 9-15V reversible. Draws about 100mA 120VAC, no load. The EMI filter is completely insulated. Unloaded speed: 9VDC 750RPM - 12VDC 1250RPM - 15VDC 2000RPM. Dimensions: 18mm x 23.3mm x 51mmL (including shaft 7.5mm length / 1.9mm dia.) Weight: 9 oz. Learn More
  9. Minimotor SA - 8-334 - Four precision DC Mini-Motor assembly.

    Minimotor SA - 8-334 - Four precision DC Mini-Motor assembly.

    $39.95

    Only 97 left in stock!

    Motors, DC. Precision cassette drive assembly. Used. Older with four Swiss & German made motors: German 330/5055-150 22mm OD x 46mm. 330/507-150 22mm OD x 46mm including 2mm dia shaft. 330-509 22mm OD x 43mm. And a 16mm geared Swiss Model 050/0055-095-485.1 200cmp MiniMotor SA 42mm Long with the 2mm shaft. All permanent magnet and reversible. You dis-assemble. Learn More
  10. REGAL - DE-25L-0001 KP63MT014 - Motors, AC/DC. Universal 120V, high speed.

    REGAL - DE-25L-0001 KP63MT014 - Motors, AC/DC. Universal 120V, high speed.

    $4.95

    Only 841 left in stock!

    Motors, AC/DC. Universal 120V, high speed. Works at 12V+ approximately 150RPM, 12V 200mA AC with bridge rectifier or DC reversible. Learn More
  11. Buehler - 1.13.043.242 - Motors, DC. 12VDC 2300RPM. Reversible.

    Buehler - 1.13.043.242 - Motors, DC. 12VDC 2300RPM. Reversible.

    $17.99

    Only 2 left in stock!

    Motors, DC. 12VDC 2300RPM useable to 24VDC 4700-RPM-Unloaded. Reversible. Dimensions: 40mm D x 83mm long, with 50mm long 4mm steel shaft. Front ball bearing, rear sleeve bearings. Three threaded mounting holes in front, 3" wire leads. Learn More
  12. Honeywell/Microswitch - 33VM82-020-11 - 24VDC Control Motor with Tach

    Honeywell/Microswitch - 33VM82-020-11 - 24VDC Control Motor with Tach

    $269.55

    Only 1 left in stock!

    24VDC Control Motor 5.7Oz-In/Amp Torque Constant. Rotor Inertia: 60 Oz-In-Sec*Sec 6.6Amps RMS. Terminal Resistance 85-Ohms. 4"OD x 6.4" long including DC ANALOG TACHOMETER: Voltage Constant: 2.5V/KRPM. Terminal Res: 50-Ohms. Voltage Ripple: 1.5% P-P with 0.5" Dia shaft with 1.6" dia rubber? wheel. Learn More
  13. MABUCHI - RS-85 - Motor, DC. Reversible 6VDC 2Amp 7600RPM.

    MABUCHI - RS-85 - Motor, DC. Reversible 6VDC 2Amp 7600RPM.

    $12.99

    Only 107 left in stock!

    Motor, DC. Reversible 6VDC 2Amp 7600RPM. Dimensions: 1.85" OD; length 2.75"; shaft 0.60". With wire leads. Note: RS-85 Series. Learn More
  14. UNMARKED - 30701 - Motor, DC. 1-3VDC. Hi Torque.

    UNMARKED - 30701 - Motor, DC. 1-3VDC. Hi Torque.

    $2.99

    Only 262 left in stock!

    Motor, DC. 1-3VDC, 15,500-RPM, approximately 1 Amp. Dual shaft 2.3mm 15mm long. ReversIble PM. Dimensions: 27.5mm/1.08" OD x 1.47" long excluding shafts. Relatively high torque. Learn More
  15. Barber Coleman - CYQM-23360-3-4 - Motor, DC. 24VDC 4750RPM. Reversible.

    Barber Coleman - CYQM-23360-3-4 - Motor, DC. 24VDC 4750RPM. Reversible.

    $19.00

    Only 12 left in stock!

    Motor, DC. 24VDC 4750RPM. Reversible. 2 Wire output of about 24VAC at full speed which could be used a tachometer. Dimensions: 2" OD x 3.03" long including shaft 0.125" D. Learn More
  16. ESCAP - 26 C28 210 1 - Motor, DC. Precision PM DC.

    ESCAP - 26 C28 210 1 - Motor, DC. Precision PM DC.

    $49.00

    Only 9 left in stock!

    Motor, DC. Precision PM DC. Made for Gould Brush Chart Recorders C282101. Dimensions: 1.022" OD x 1.230" high. Shaft: 0.079" (2.0mm) D x 0.379" (9.6mm) long). Seated 0.560" (11.7mm) long, from body. 2 Wire, 4.5" long. Learn More
  17. JOHNSON - HC315XLG - Motor, DC. Reversible PM 6-24VDC.

    JOHNSON - HC315XLG - Motor, DC. Reversible PM 6-24VDC.

    $12.95

    Only 7 left in stock!

    Motor, DC. Reversible PM 6-24VDC. Miniature, 0.09" shaft, 0.60" long with removable brass gear. Dimensions: 1.14" OD x 2.12" long with bushing, plus 0.6" long shaft. Note: PM = Permanent magnet. Learn More
  18. Leeson - C4T34DC1B - C4T34DC1B 3 Phase motor

    Leeson - C4T34DC1B - C4T34DC1B 3 Phase motor

    Regular Price: $100.00

    Special Price $50.00

    Only 1 left in stock!

    1/2HP 3450/2850RPM JS56C.DP 208-230 volts 60/50 HZ cont duty Learn More
  19. MAXON - 46.032.032-22.00-125 - 0.5-12, 24VDC? PM MagicMotor 32mm dia

    MAXON - 46.032.032-22.00-125 - 0.5-12, 24VDC? PM MagicMotor 32mm dia

    $189.00

    Only 1 left in stock!

    BEAUTIFUL HIGH TORQUE, VERY HIGH EFFICIENCY small DC Motor. Started turning at less than a Volt ! APPROX 25RPM at 6VDC (nobody has a watch anymore) 32mm dia x 113mm long plus 17mm long shaft w/flat 6mm diameter. Learn More
  20. BALDOR - CDP3436 - Motor, DC. Supply: 180VDC 3.7A

    BALDOR - CDP3436 - Motor, DC. Supply: 180VDC 3.7A

    $544.99

    Only 1 left in stock!

    Motor, DC. Supply: 180VDC 3.7A Armature. Speed: 1750 RPM. HP: 3/4. Frame Size: 56C TEFC. Note: 40C-ambient. Continuous duty Supply FF1.3 BRG:6203 Brush: 2/BP5000AW14 Spec:34-5990-3946 type PH3428P. Looks new. Learn More
  21. CLIFTON - AS-718-013 - Motor, DC. 4P 3-24VDC, dual shaft.

    CLIFTON - AS-718-013 - Motor, DC. 4P 3-24VDC, dual shaft.

    $7.50

    Only 11 left in stock!

    Motor, DC. 4P 3-24VDC, dual shaft, one end threaded for 5/40, 200ma@12vdc and 400ma @ 24vdc. Learn More
  22. Fincor - 5002441 - Motor, DC. Supply: 180VDC 1/3HP

    Fincor - 5002441 - Motor, DC. Supply: 180VDC 1/3HP

    $175.00

    Only 1 left in stock!

    Motor, DC. Supply: 180VDC. Current: 2.1A-Armature, PM-Field. Speed: 1725 RPM. 1/3 HP. Frame Size: TENV. Note: Class:F Continuous duty. Used, has pulley attached. 9303318TN. Fincor. Note: The motor's length from one end to the end of the shaft is 17-inches. The motor's diameter is approximately 5-inches. The mounting centers are 8-inchess (lengthwise) 8-1/4-iches widthwise. Learn More
  23. UNMARKED - 8-947 - Motors, DC. 12VDC.

    UNMARKED - 8-947 - Motors, DC. 12VDC.

    $3.00

    Only 32 left in stock!

    Motors, DC. 12VDC. Learn More
  24. Barber Coleman - FYQM63200-25 - Motor, DC. 12VDC 150mA.

    Barber Coleman - FYQM63200-25 - Motor, DC. 12VDC 150mA.

    $8.95

    Only 166 left in stock!

    Motor, DC. Supply: 12V. N/P Current: 150mA. Speed: 1200. Body Dimensions: 1.25" D x 2" long. Note: Reversible (PM) permanent magnet. Learn More
  25. BOWMAR-HAROWE - 83036-01 - Motor, DC Permanent Magnet . Supply: 3-18VDC.

    BOWMAR-HAROWE - 83036-01 - Motor, DC Permanent Magnet . Supply: 3-18VDC.

    $25.00

    Only 10 left in stock!

    Motor, DC permanent magnet. Supply: 3-18VDC. Direction: reversible 4-pole. Wire count: eight teflon wires. Mech. Mtg.: 2 flush mount brackets on the bottom. Shaft dimensions: partially threaded 0.123"D shaft is 0.43"L. Note: With optical tachometer, no spec available. Very high efficiency for popular daisy wheel printers. Learn More
  26. Buehler - 10075875 - Motor, DC. Supply: 6-24VDC.

    Buehler - 10075875 - Motor, DC. Supply: 6-24VDC.

    $19.99

    Only 6 left in stock!

    Motor, DC. Supply: 6-24VDC. Note: Permanent magnet with tach. High speed, reversible, 4 wire with a 4 position female rectangular connector. Learn More
  27. JOHNSON - 1030361 - Motor, DC. With Super-Cap Drive Assembly.

    JOHNSON - 1030361 - Motor, DC. With Super-Cap Drive Assembly.

    $9.99

    Only 993 left in stock!

    Motor, DC. With Super-Cap Drive Assembly: Internal assembly of a battery operated cutting tool. 7.2VDC motor is paralleled by three series connected Super-Caps (10F @ 2.5VDC each) to form an overall capacitance of 3.3F @ 7.5VDC). There are also three switches and a high brightness LED. Note: With the motor disconnected, and the capacitors charged to 7VDC, the LED will be brightly illuminated for longer than 10 minutes. Learn More
  28. MATSUSHITA - 6-231 - Motor, DC. 4.5VDC - 6.5VDC.

    MATSUSHITA - 6-231 - Motor, DC. 4.5VDC - 6.5VDC.

    $2.50

    Only 27 left in stock!

    Motor, DC. 4.5VDC - 6.5VDC. Learn More
  29. Oriental Motors - 0GN30KA - GEAR HEAD 30:1 Small 42mm square

    Oriental Motors - 0GN30KA - GEAR HEAD 30:1 Small 42mm square

    $59.00

    Only 4 left in stock!

    1.65" [42mm square] for GN-type pinion shaft motors. Ball Bearing - GN gearhead Parallel Shaft (30:1) - Parallel Shaft Gearhead for use with a wide variety of motors. Learn More
  30. Oriental Motors - 2GB18KA - GEAR HEAD 18:1 obsolete

    Oriental Motors - 2GB18KA - GEAR HEAD 18:1 obsolete

    $55.00

    Only 14 left in stock!

    GEARHEAD for ORIENTAL MOTORS 18:1 New, in box with M4P0.7 cross-recessed head machine screws 13-In-Lb-max Learn More
  31. Oriental Motors - 2GB50KA - GEAR HEAD 50:1

    Oriental Motors - 2GB50KA - GEAR HEAD 50:1

    $69.00

    Only 3 left in stock!

    Parallel Shaft Gearhead for use with a wide variety of motors. Learn More
  32. PITTMAN - 9513B815 - Motors, DC. Military 12VDC.

    PITTMAN - 9513B815 - Motors, DC. Military 12VDC.

    $77.99

    Only 1 left in stock!

    Motors, DC. Military NSN 6105-01-152-2800. 12VDC. Double marked 880023. Learn More
  33. PITTMAN - MT8312E721 - Motor, DC. 24VDC.

    PITTMAN - MT8312E721 - Motor, DC. 24VDC.

    $39.00

    Only 5 left in stock!

    Motor, DC. 24VDC. Dimensions: 1.18" D x 3.9" long plus shaft 0.162" D x 0.490" long. Learn More
  34. PITTMAN - MT9423C849 - Motor, DC. 24VDC.

    PITTMAN - MT9423C849 - Motor, DC. 24VDC.

    $39.00

    Only 1 left in stock!

    Motor, DC. 24VDC. Motor with shaft measures 1-5/8" D x 4 3/8" long. Learn More
  35. RELIANCE ELECTRIC - T56H1033T-NR - 180VDC 1HP TENV MOTOR

    RELIANCE ELECTRIC - T56H1033T-NR - 180VDC 1HP TENV MOTOR

    $300.00

    Only 1 left in stock!

    180VDC 1HP TENV MOTOR 1725 RPM TOTALLY ENCLOSED NON VENTED.LOOKS IN GOOD COND. Learn More
  36. Warner Electric - BCD56RD417 - Motor, DC. 1HP 180V 1725RPM.

    Warner Electric - BCD56RD417 - Motor, DC. 1HP 180V 1725RPM.

    $289.00

    Only 1 left in stock!

    Motor, DC. Supply: 180V 5.1A-Armature 200V 0.4A-Field. Speed: 1725 RPM. Horsepower 1.0 Keyed shaft MOH2210100. Dimensions: Overall 6.5" D x 13.25" long. Shaft: 5/8" D x 2" long. NIB. Note: (Not a permanent magnet motor). Learn More

36 Item(s)

per page

List  Grid 

Set Descending Direction