Motors

DB Electrical 410-48135 SMT0372 - Starter for Ford New Holland Skid Steer M2T47281, SBA18508-6370, SBA18508-6540, SMT0372

• Fast engine starts thanks to more torque from high quality magnets or field coils
• Cleaner and drier inner workings with sealed housings that block performance-robbing residue
• Upgraded copper and silver contacts enhance performance over aluminum or steel ones
• A long service life and improved efficiency result from premium brushes and bushings

Unit Type: Starter

Voltage: 12 VDC

Rotation: CW

Teeth: 8

KW: 0.8

Starter Type: DD

Fits: FORD TRACTOR w/ISHIKAWAJIMA ENGINE

RIGMASTER APU UNIT

Material: Metal

Item Weight: 9 Pounds

Item Dimensions LxWxH; 7.4 x 5.8 x 3.8 inches

Note: Includes Test Report

Applications: FORD TRACTOR w/ISHIKAWAJIMA ENGINE, RIGMASTER APU UNIT

Alternates: ARROWHEAD SMT0372, ARROWHEAD (OEM) M0TD1771, M2T47281, CARGO 110315, ISHIKAWAJIMA 18508-6540, J & N 410-48135, LESTER 19756, MITSUBISHI M2T47281, PERKINS 185086540

 

Learn More

Hankscraft Motors - MotorOne - High Torque Gear Motor.

Practical for industrial and laboratory applications Here's our most versatile DC gear motors. Each version is a light, quiet motor and fully enclosed in ABS plastic. Choose these motors when you need a strong quiet DC gear motor that draws low current so your amperage requirements can be met. This is a DC gear motor perfect for a variety of uses such as control motors or even pump motors. Self-starting motors feature: * Slow speed and high torque * DC reversible gear trains.

Voltage: 6VDC

Speed: 4RPM.

Connections: 2 Wire.

Reversible.

Housing: Thermoplastic, Black.

Mount: Panel.

Continuous Run, Low Temperature

Dimensions: 1.776" D x 2.029" High Overall with two mount feet 2.448" D, at 2" centers.

Steel Shaft half/flattened 0.138" D, (1/8" D), (3.5mm D), x 0.720" (18.2mm) long, plus shaft seat 1/8".

New. 

Great for Animated Displays

Hankscraft Motors Reedsburg WI

Proudly Made in USA.

Learn More

Motor, stepper SLO-SYN. Supply: 2.64VDC. 5.5A. Steps: 200 steps / revolution. Torque: 450-Oz-In Holding. Direction: reversible. Wire count: 6 wires. Mech. Mtg: 4 holes 70mm spacing. Body Dimensions: 86mm D x 132mm L plus shaft. 10mm D. Class B insulation, 65degC. Weight: 8 lbs. Note: This motor is 9 lbs packed and will require additional shipping funds above the $9.90 USD the website will attached to any order.

Learn More

ENCODER PRODUCTS CO. - 220C OC - 220C-12-600-OC-.750L - Optical Encoder, Hollow Shaft.

Status: Discontinued

ACCU-CODER. 600-pulses per revolution.

ENCODER SHAFT INCREMENTAL 5VDC 180CPR

12VDC 3/4"Hollow for 4K RPM Shaft 0-6000Hz.

10-oz Running torque.

2.25"D x 1.735".

Sealed Ball Bearings.

Supply: 12VDC at 25mA.

Square wave output sinks 20 mA.

1uSec rise time.

Aluminum with black anodized finish, 3-conductor cord 6' long wt: 8oz

New Old Stock - Made in USA

Note: Repais of used Encoders cost as much as $428.

Learn More

Grainger Dayton Motor 4Z065A Permanent Split Phase Capacitor Gearmotor, 95 RPM, 1/25 HP 115 VAC 20 In-Lbs, Motor Ref. No EM5R-103-1

Dayton Permanent Split Capacitor Gearmotor - Reversible
HP: 1/25   Gear Ratio 16.7:1
RPM: 95 @ 60 Hz
RPM: 79 @ 50 Hz
Voltage: 115 Hz 50/60, 0.52 Amp Full Load 
Torque: 20 in. lbs, Max Overhung Load Capacity: 50 lbs
Bearings: Sleeve and Ball
Mounting: Face6
Enclosure: TENV (Totally Enclosed Non-ventilated)
Ambient: 40°C Max, Insulation Class A (Max. 221F)
Duty: Continuous
Shaft: 1/2" Diameter

Alternate: Dayton 453R96

New in Manufacturers Box with specifications, instruction, parts list booklet.

Note: We are also including and adding into the package a required 5MFD-370 VAC Oil-Filled Capacitor (GE Z97F5705).  

Learn More

106mm dia x 123mm long, with 15.9mm [5/8"] 35.5mm [1.4"] long Keyed shaft, 4 holes 88mm centers on 9.6mm thick 107.7mm square aluminum flange - 1.8 DEG 200 STEP/REV 2.3VDC / PHASE 6.1AMP - 0.625"Shaft Residual Torque: 20 OZ-IN - CLASS B STEPPER MOTOR 42=FRAME SIZE SINGLE SHAFT Min Holding Torque: 625-OZ-IN - DYNAMIC STEW TORQUE: 425-oz-in nom rotor inertia: 54.6 Oz-In SEC X SEC X 1000 - weighs 8.3-pounds

Learn More

Starter, Magnetic, 3PH. Size 00, Coil: 110VAC 60cy. One normally open auxiliary contact. Two pole overload assembly. (No overload heaters included) Mount: Panel. Open frame. Learn More

Motor Drive. Slo-Syn. Input: 115VAC 6Amp 50/60Hz. Recommended for the following FF206 Motors: M061, M062, M063, M091, M092, M093, M111,M112 and MH112. KML Motors: 060-FO2, 061-F03, 062-F03, 063-F04, 091-F07, 092-F07, 093-F08 AND 093-F10. Mount: Panel, flange 2-1/3" wide x 5.8" deep. Unit Dimensions: 3.661" wide x 9.5" high x 5-7/8" deep. Weight: 6 lbs. Note: Looks to be in excellent condition. Sold As Is. Learn More

IC. Motor driver, 3 channel half bridge. Case: 16 Dip. New. Learn More

Motor, stepper. 12VDC 50 Ohm. Dimensions: 42mm D with square mounting plate x 22mm deep, 6 wire 8 inches long. Shaft: 3mm x 9.5mm long.Weight: 4.2 OZ. Learn More

Relay, control. Input: AC. Contacts: SPDT. Contact Ratings: 25Amp. Coil Voltage: 12VAC 50/60Hz (1HP, 120/240VAC, 1PH 25Amp 277VAC). Mech Mtg: Panel, open frame. Note: Alt P/N: 466. Listed: UL/CSA. Made in the USA. Cross: NTE Equivalent NTE R04-5A30-12.

Learn More

IC. 4 Phase stepper motor driver. Power amplifier module. Case: 18 Power SIP. New. Learn More

Motor, gear head. Ratio 60:1, Size 4. Learn More

Motor, gear head. Ratio 30:1, Size 4. Learn More

High voltage tripler, silicon. Learn More

FUJI Electrochemical Co. - SM25-24KO - Motors Mini Stepper

A 6-wire stepper motor is similar to a 4-wire configuration with the added feature of a common tap placed between either end of each phase. Stepper motors with these center taps are often referred to as unipolar motors. This wiring configuration is best suited for applications requiring high torque at relatively low speeds.

2mm Shaft 8mm Long

6-Wire

Dimensions: 25mm [1"] Dia x 6mm [0.63"'deep 2-hole mount 32mm [1.25"] Centers 

New Old Stock

Made in Japan

Learn More

Parker Compumotor Corp - 71-006875-02  - A57-51 - Compumotor. Dual Double Shaft stepper Motor

OEM SERIES STEPPER MOTOR, 57MM FRAME SIZE, 51MM STACK LENGTH

4 Wire

Mount: Panel, 2.27" square flange with 2-5/8" centers.

Dimensions: body 57mm D x 53mm.

Weight: 1.5 lbs.

Used, Removed from Equipment

Made in USA

Learn More

Parker Compumotor Corp - CPL57-120 Stepping Motor.

RS-232 driven 50-150VDCpeak - 20kHz PWM

Max. Continuous Speed: 3600RPM.

Torque (Continuous): 130 in-oz,  Torque (Peak): 160 in-oz

Rottor Inertia: 0.0042 oz-in-sec2

Dual 1/4" shafts 0.75" long.

Motor Weight: 3.2 lbs.

Connectors: One 5 Pin male and One 6 position female circular connectors.

Mount: Flange 2.25" x 2.25", with 4 (.205") holes at 2.625" bolt circle.

Body Dimensions: overall 2.250" side x 3.362" deep x 4.750" high, plus dual shafts.

Note: Used/Removed from equipment. Motor Only - Good Condition.

Made in USA.

Additional Information: https://www.parkermotion.com/manuals/cplus/CPLUS_Analog_1-5.pdf

 

Learn More

Motors, AC. Hysteresis synchronous 230VAC 50Hz 0.5Amp 1500 RPM 1/25HP. Size: 84mm D x 130mm long. plus 20mm flatted shaft 3/4" long x 0.311" 8mm. Requires 5uF 330VAC capacitor, not included. Weight 5 lbs. Learn More

Motor, stepper. Dual shaft, 8 Wire. Max phase current: 2.47Amp V4 1.63 Ohm. Mount: Panel, 47mm centers. Body: 56mm D x 141mm long. Shaft(s) 6.4mm D x 19mm long. Weight: 2.9 lbs. Learn More

Heater. Overload thermal heating element 0.71-0.78Amp. Learn More

Heater. Overload thermal heating element 30.7-33.5Amp. Learn More

Heater. Overload thermal heating element 33.4-36.0Amp. Learn More

Heater. Overload thermal heating element 1.05.-1.14Amp. Learn More