Electrical, Electronic
& Electromechanical
Supplies - (440) 205-8388

Search Site

Special

Items 1 to 48 of 85 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. SANYO DENKI - P60B13200LCX2C - 3.1kW 3000-RPM BL Super Servo Motor

    SANYO DENKI - P60B13200LCX2C - 3.1kW 3000-RPM BL Super Servo Motor

    $899.00

    Only 1 left in stock!

    BL Super SERVO MOTOR 3.1KW 3,000-RPM 0.40" [10mm] dia mounting holes on 4.55" [115mm] centers. 135mm square face about 193mm long including 8.9mm dia shaft for encoder - Available With or WithOut encoder. 19.5mm dia knurled shaft 45mm long. Weighs 25-pounds without encoder or packaging. Learn More
  2. AIRPAX - L82401-P2 - Motor, stepper. 12VDC 52 ohm.

    AIRPAX - L82401-P2 - Motor, stepper. 12VDC 52 ohm.

    $9.95

    Only 369 left in stock!

    Motor, stepper. 12VDC 52 ohm. 7.5 deg/step. 6 wires. Mounting: 1-3/8" hole spacing. Body: 42mm D. Shaft: 2.9mm D x 9.6mm L. Mount plate, 4 holes, 35mm centers. Weight: 4.8 oz. Learn More
  3. PORTESCAP - GC26M048A30V - 5V Mighty Mini 6-wire 10:1 geared stepper

    PORTESCAP - GC26M048A30V - 5V Mighty Mini 6-wire 10:1 geared stepper

    $14.95

    Only 343 left in stock!

    5V Miniature Stepping Motor with heavy 10:1 gear box. 4-Phase 6-wire UniPolar, Only 1.1"[28mm] x 1.43[36.2] x 1"[25.4] high with 3mm knurled shaft 7.5mm long. Mounts on two threaded holes on 30mm centers. RoHS:yes DANAHER / PORTESCAP 1.8 oz Learn More
  4. EMERSON - BLM6210-4 - 460V 3000RPM Brushless 150Hz 210-Lb-In

    EMERSON - BLM6210-4 - 460V 3000RPM Brushless 150Hz 210-Lb-In

    $1,444.00

    Only 1 left in stock!

    Motor, servo. Supply: 460V. Speed: 3000RPM. Torque: Stall Cont: 13.6 Reg Amp 210-Lb-In. Stall Peak: 23 Reg Amp 390-Lb-In. K-B: 114V/KRPM.. Note: Brushless 150Hz. Class:55C Ser 96L624E-97 Large Black motor with Pulley - Excellent condition. Learn More
  5. AIRPAX - 82227/B82359 - Motor, stepper. 12VDC 2 phase 37 ohm.

    AIRPAX - 82227/B82359 - Motor, stepper. 12VDC 2 phase 37 ohm.

    $2.95

    Only 1230 left in stock!

    Motors, stepper. Simple 2-phase, 12VDC 48 Step/Rev 7.5deg/step, 37 Ohm Bipolar windings. Dimensions: 35mm, 1.38" D. Attached: 4 wire, 16 inches long. Mounts 1.7" 42mm hole spacing, includes a 15-tooth 1/4" dia nylon gear. Running rate to 1800 step/sec. Weight: 2.6 oz. Learn More
  6. AIRPAX - A82454-M3 - Stepper 5V 1.125deg/step 0-400RPM 0-320P/Sec

    AIRPAX - A82454-M3 - Stepper 5V 1.125deg/step 0-400RPM 0-320P/Sec

    $6.95

    Only 384 left in stock!

    5V STEPPER 0-400RPM 0-320PPS 1.125 deg/step 3.5W Four 15-Ohm coils 6-leads Rotation Reversable 2.12" x 2.75" x 1.4" with gear attached to 1/8" shaft - 2 mounting holes 2.38"apart 7oz Learn More
  7. Applied Motion Products Inc - 4017-838 - Stepper Motor 12V 3.6Deg 4-Phase

    Applied Motion Products Inc - 4017-838 - Stepper Motor 12V 3.6Deg 4-Phase

    $8.99

    Only 256 left in stock!

    12VDC Stepper Motors 0.16Amp 100 Steps/Rev 3.6Deg/Step 4-Phase75-Ohm , MPI SPEC# 77619324 made in Japan 42mm sq x 33mm deep 2-slots 62mm apart on 55x78mm flange 4.9x11.1mm shaft Learn More
  8. SEIKO EPSON - EM462 - Stepper motor 42mm Dia 4-wire

    SEIKO EPSON - EM462 - Stepper motor 42mm Dia 4-wire

    $4.95

    Only 387 left in stock!

    Stepper motor for Epson 4-Wire Two 9-Ohm Coils on ribbon cable - 1.65"/42mm Diameter - 24mm tall - mounts on two holes 50mm apart - gear on 2.9mm shaft is 8mm Diameter - NEW Learn More
  9. SUPERIOR ELECTRIC CO. - MP70-1A-A4-9Z-025 - Motor, stepper. 15V 4 phase 0.49Amp.

    SUPERIOR ELECTRIC CO. - MP70-1A-A4-9Z-025 - Motor, stepper. 15V 4 phase 0.49Amp.

    $12.95

    Only 57 left in stock!

    Motor, stepper. 15V 4 phase 0.49Amp. 48 step/rev. 8 wires. Mounting: 2.2" hole spacing. Body: 2.75" square (70.5mm) x 1.75" high (46mm). Shaft: 1/4" D x 0.63" L. Weight: 1.3 lbs (22 oz). Note: Slo-Syn. Very compact for amount of torque. 8-wire = 4-phase = Unipolar. Learn More
  10. SUPERIOR ELECTRIC CO. - MP70-9A-Z9-9Z-017 - Motor, stepper. 5.2VDC 1.44Amp.

    SUPERIOR ELECTRIC CO. - MP70-9A-Z9-9Z-017 - Motor, stepper. 5.2VDC 1.44Amp.

    $7.50

    Only 260 left in stock!

    Motor, stepper. 5.2VDC 1.44Amp. 48 step/rev. Mounting: 2.28" hole spacing. Body: 2-3/4" D x 1.7" L. Shaft: 1/4" D x .6" L w/ flat. Shaft: 0.25" shaft w/flat 5/8" long, 2.75"square mounting plate with 4 holes with threaded inserts, about 2.28" apart. Weight: 1.5 lb (23 oz). High torque. Note: Slo-Syn. 8-wire 4-winding. Very High Torque. Learn More
  11. GOULD - M33Y-SNRY-Y004-1B - 24VDC 10hp 195 Lb-In PM SERVO MOTOR=NEW

    GOULD - M33Y-SNRY-Y004-1B - 24VDC 10hp 195 Lb-In PM SERVO MOTOR=NEW

    Regular Price: $995.00

    Special Price $799.99

    Only 1 left in stock!

    24V 10HP 195 Lb-In PERM-MAGNET SERVO MOTOR Slightly Used but appears in good condition - Brushless Resolver type Feedback - this motor was probably rated to 3,000 RPM using a 250V 20A drive - Motor Dia is 7-inches x 12" long -Shaft is 1.25"keyed and 2-11/32"long - BACK EMF Ke 70.4V/KRPM - TORQUE CONSTANT Kt 10.3 Lb-In/Amp - 16.2Amp STALL CURRENT - Connection Diagram 497-302-0077 - Outline Dwg 497-206-0097 Learn More
  12. MINEBEA CO LTD - 17PS-C054-01 - Motor, stepper. 12VDC 4-wire 14.4-degree

    MINEBEA CO LTD - 17PS-C054-01 - Motor, stepper. 12VDC 4-wire 14.4-degree

    $19.95

    Only 6 left in stock!

    Motor, stepper. Supply: 12VDC. 2-Phase 4-wire. Winding Res: 4-wire 30-ohms/winding. Steps: 14.4degrees / step. Direction: reversible. Wire count: 4 wire. Mech. Mtg: 4 4/40 studs on front. Body Dimensions: 1.66" square x 1.3". Shaft: 0.20"D x 0.55"L. 0.5 lb. Learn More
  13. AIRPAX - L82101-P2 - Motor, stepper. 12V 118 ohm.

    AIRPAX - L82101-P2 - Motor, stepper. 12V 118 ohm.

    $9.00

    Only 19 left in stock!

    Motor, stepper. 12V 118 ohm. 15 deg/step. 6 wires. Mounting: 1-3/8" hole spacing. Body: 1"D (25.5mm) x 1/2" (12.6mm) deep, with 35mm mount centers. Shaft: 1.7mm D x 8.7mm L. Weight: 1 oz. Learn More
  14. MATSUSHITA - 55SI-25DAWC - Motor, stepper. 12V 36 Ohm 7.5 Deg 6 Wire.

    MATSUSHITA - 55SI-25DAWC - Motor, stepper. 12V 36 Ohm 7.5 Deg 6 Wire.

    $5.99

    Only 75 left in stock!

    Motor, stepper. 12V 36 Ohm 7.5 Deg 6 Wire. Dimensions: 2.042" (51.8mm) D body, overall with mount 3.138" (79.7mm) long. Heatsink is 2.955" (75.0mm) wide x 1.027" (26.00mm) high. Shaft 1/4" half flat x 0.750" (19.0mm) long. Please note: With attached 6 position female header connector. Silicon grease is between the motor the heatsink. Weight 11 oz. Manufactured by Matsushita for Coleco Adam. Learn More
  15. LEDEX - 5945-636-5462 - Motor, stepper. Supply: 48VDC.

    LEDEX - 5945-636-5462 - Motor, stepper. Supply: 48VDC.

    Regular Price: $27.50

    Special Price $21.95

    Only 19 left in stock!

    Motor, stepper with switch. Supply: 48VDC. Body Dimensions: 1.90"D x 2.74"H. Weight: 12oz. With wafer switch. Military NL-71277-3-2, B-61986-A Learn More
  16. Warner Electric / Superior - KMT091F05E - Stepper, Dual-shaft 3VDC 2.7A 200S/Rev

    Warner Electric / Superior - KMT091F05E - Stepper, Dual-shaft 3VDC 2.7A 200S/Rev

    $250.00

    Only 5 left in stock!

    Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversible. Wire count: Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Two-phase, single stack. Weight: 5 lbs. Warner Electric / Superior Learn More
  17. SUPERIOR ELECTRIC CO. - M093-FF-206 - Stepper 3.8V 4A 550-Oz-In 200S/R.

    SUPERIOR ELECTRIC CO. - M093-FF-206 - Stepper 3.8V 4A 550-Oz-In 200S/R.

    $289.88

    Only 3 left in stock!

    Motor, stepper. Synchronous, bipolar. Supply: 3.85V 4.0A. Steps: 200 steps per rev. Torque: 550 Oz-In Hold. Direction: Reversable. Wire count: 4-wire leads. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.38"D, 3.25"square x 5.2" plus 0.38" keyed shaft with flat. Note: 8 lbs. Used as demo, excellent condition. Learn More
  18. SUPERIOR ELECTRIC CO. - PDT500-1001 - SLO-SYN Positioning System

    SUPERIOR ELECTRIC CO. - PDT500-1001 - SLO-SYN Positioning System

    $495.00

    Only 2 left in stock!

    SLO-SYN Positioning System. Stepper motor Drive combined with a Micro-series Indexer. New, in box with manual. Learn More
  19. ASSL / AEG - MS43E-11C0-000 - PM AC ServoMotor 1.9Kwatt 330V 9A 6000-RPM

    ASSL / AEG - MS43E-11C0-000 - PM AC ServoMotor 1.9Kwatt 330V 9A 6000-RPM

    $195.00

    Only 1 left in stock!

    PM AC Servo Motor S1-1.9Kwatt 330V 9.1Amp 6000-RPM 4.5" square x 1.75"LSensor - Resolver Brake 12 Nm 24V 0.75Amp S/N 97/12225 Manuf in Ireland 0.75" keyed shaft 1.5" long 8-pin and 12-pin Male connectors. heavy duty. Learn More
  20. Cleveland Motion Controls - MT3515-307CG60 - Motor, PM servo.

    Cleveland Motion Controls - MT3515-307CG60 - Motor, PM servo.

    $159.79

    Only 1 left in stock!

    Motor, PM servo. Mounted on aluminum block 89mm x 114mm with a 4 pin male connector on short cable. Dimensions: 86mm D x 188mm long including 9.6mm flattened shaft. Learn More
  21. Compumotor Corp - 71-013329-01 - Motor, servo. 3PH brushless. With 10 Tach.

    Compumotor Corp - 71-013329-01 - Motor, servo. 3PH brushless. With 10 Tach.

    $125.00

    Only 1 left in stock!

    Motor, servo. 3PH brushless. With 10 Tach, 10 wire ([5-used] 6-teflon wire). Dimensions: 58mm square x 120mm long, 6.4mm shaft 17mm long. Mount: 4-holes 47mm centers. Weight: 2.4 lbs. Learn More
  22. GLENTEK INC - GM3320 - Motor, servo. PM DC. 120-In-Oz.

    GLENTEK INC - GM3320 - Motor, servo. PM DC. 120-In-Oz.

    $488.69

    Only 1 left in stock!

    Motor, servo. PM DC. 120 In-Oz Torque, 4Amps, 2.1 Ohm, 4mH Inductance. BEMF 22V/1000RPM. Max speed 3,000-RPM. Tach 7V/1000RPM, JA-LB-SecxSec: 0.0020. Dimensions: 83mm D, 92mm with brush holders x 190mm plus 38mm long, 13mm keyed shaft. Has a 14-pin male connector with tarnished pins. Learn More
  23. KG - Japan - TS3325NE14 - 60W 1.14kg-cm AC Servo Motor

    KG - Japan - TS3325NE14 - 60W 1.14kg-cm AC Servo Motor

    $125.88

    Only 1 left in stock!

    60W 1.14kg 1.66"OD x 4.5"L plus 8mm 0.315" splined Shaft 0.5"LongHas two 33" long cables to a 10-pin connector With mating receptacle, new. weighs 1.7pounds Learn More
  24. KG - Japan - TS3326NE14 - 135W AC Servo 3.3kg-cm

    KG - Japan - TS3326NE14 - 135W AC Servo 3.3kg-cm

    $195.00

    Only 2 left in stock!

    135W AC Servo Torque 3.3kg-cm 2.27"D x 4.9"L plus 0.40"D splined shaft 0.6"L Mounts with two threaded holes 2.325" 60mm spacing. Has two 33" cables terminating in a 10-pin Male plug, with mating 10-pin panel mount receptacle, new - probably spares for a machine. weighs 2.8 pounds Learn More
  25. KG - Japan - TS3327NE11 - AC SERVO MOTOR 205W 10-pin

    KG - Japan - TS3327NE11 - AC SERVO MOTOR 205W 10-pin

    $175.00

    Only 1 left in stock!

    2.28"d x 6.5"L 0.388"/9.8mm spline shaft 0.45"L New with long cable to 10-pin Male circular connector and mating panel mount SRON2A21-10S socket. 3.67-pounds Mounts with two threaded holes 0.192"ID 2.35"spacing. Learn More
  26. MTS AUTOMATION - MPM892BSG6JY1N - 1HP 230V 3-Ph 3000RPM Servo Motor

    MTS AUTOMATION - MPM892BSG6JY1N - 1HP 230V 3-Ph 3000RPM Servo Motor

    $375.00

    Only 1 left in stock!

    Motor, Servo. Supply: 230V 3-Phase. Current: 2.6A-rms/Phase Rating: Intermittant 3Ph, S9, Class F. Speed: 3,000 RPM max. HP: 1.05. Wire count: 2 MS connectors. Body Dimensions: 3.35"square x 10"L . Shaft: 0.50"D keyed shaft 1.1"L. 10 lbs. Note: EN60034-1; IEC 664-1(1992) MTS AUTOMATION Made in Germany by Antriebstechnik GmbH. Learn More
  27. SANYO DENKI - 45BM007HBC90 - Motor, Servo. Speed: 3000 RPM 0.2kW

    SANYO DENKI - 45BM007HBC90 - Motor, Servo. Speed: 3000 RPM 0.2kW

    $374.95

    Only 1 left in stock!

    Motor, Servo. Speed: 3000 RPM. HP: 0.2kW. Wire count: Two cables to motor, 2-cond and 4-conductor. Mech. Mtg.: 4-hole mount 2.5"spacing. Shaft Dimensions: 0.46" / 11.6mm keyed shaft 1"L, with key. Weight: 9 lbs. Note: Servo Motor with holding brake and Encoder. Long flexible rubber cable with 16-pin Honda M connector from MRE-256SP052FSS Encoder.. Learn More
  28. AIRPAX - A82352-M3 - 18deg 1.5-In-Oz 42mm 4-wire

    AIRPAX - A82352-M3 - 18deg 1.5-In-Oz 42mm 4-wire

    $5.95

    Only 26 left in stock!

    Stepper, 18 Deg/Step, 1.5 in-oz, 4 wires, Mounting 2 holes 42mm apart, Body 37x50x20mm thick, Shaft 2x8mm with4.6mm gear,2.6 oz, 4.6mm 10-toothGear. Learn More
  29. Applied Motion Products Inc - 5023-169D - Motor, stepper. Dual shaft, 8 Wire.

    Applied Motion Products Inc - 5023-169D - Motor, stepper. Dual shaft, 8 Wire.

    $49.00

    Only 1 left in stock!

    Motor, stepper. Dual shaft, 8 Wire. Max phase current: Series 1.70Amp Parallel 3.40Amp. Mount: Panel, 47mm centers. Body: 56mm D x 141mm long. Shaft(s) 6.4mm D x 19mm long. Weight: 2.9 lbs. Learn More
  30. ARC SYSTEMS - 2015-02 - Arcustep 24VDC stepper motor

    ARC SYSTEMS - 2015-02 - Arcustep 24VDC stepper motor

    Regular Price: $15.00

    Special Price $12.95

    Only 6 left in stock!

    Arcustep 24VDC - step angle 15 Deg Servo-mount 50.7mm dia x 75mm long, Plus 11.1mm dia worm gear 111mm long - 6.7mm dia shaft 9.3mm Long at rear. Four wire teflon leads. Measured resistance is either 20 or 40-Ohms fron one wire to any other wire Learn More
  31. Eastern Air Devices - LA23BCK-47 - 6VDC 1.8degree 4-Ph 6-wire Stepper

    Eastern Air Devices - LA23BCK-47 - 6VDC 1.8degree 4-Ph 6-wire Stepper

    $69.95

    Only 5 left in stock!

    6VDC 1.25Amp 1.8degree 4-Phase 6-teflon 15"wires Stepper Motor 2.25"D x 3.0"L 4-hole mounting 1.85" spacing 0.25"D shaft 0.75"L New, Old Stock weighs 2-pounds Learn More
  32. FDK - E02A1ZD - Stepper Motor 4-Wire very thin 42x14mm

    FDK - E02A1ZD - Stepper Motor 4-Wire very thin 42x14mm

    $5.95

    Only 25 left in stock!

    42mm dia x 14.5mm thick, 2.9mm shaft 11mmL with 6.2mm 10-tooth brass Gear 4-hole plate, 35mm centers Stepper Motor 4-Wires, 19"long very thin 3.6oz Learn More
  33. HURST - 3007-001 ABS - 12VDC 6-wire 15-degree Stepper

    HURST - 3007-001 ABS - 12VDC 6-wire 15-degree Stepper

    $58.95

    Only 3 left in stock!

    12VDC 4.25W 6-lead Bifilar 15-degree Stepper Model #ABS Part #3007-001 Reduction: DD - Volts: 12DC Step Angle: 15-degrees. Mounts with two holes on 2.38" centers, pear shaped gear cup Instrument Motor 0.125" shaft half an inch long. Some instructions supplied. Learn More
  34. MINEBEA CO LTD - 17PS-C007-05 - Motor, stepper. 12VDC 3.6Deg 5-wire 42mm.

    MINEBEA CO LTD - 17PS-C007-05 - Motor, stepper. 12VDC 3.6Deg 5-wire 42mm.

    $9.95

    Only 5 left in stock!

    Motor, stepper. 12VDC 3.6Deg/Step 0.16Amp/Phase 5-wire. Dimensions: 42mm sq x 33mm deep - 80x57mm flange with 2 mounting slots 66.6mm centers. MPI SPEC. #77619324. Learn More
  35. Oriental Motors - C7185-9212 - 6V 1.8deg 2-Phase VEXTA Stepper

    Oriental Motors - C7185-9212 - 6V 1.8deg 2-Phase VEXTA Stepper

    Regular Price: $49.00

    Special Price $41.95

    Only 4 left in stock!

    6VDC 1.2AMP 2 PHASE 1.8DEG./STEP 4 WIRE STEPPER MOTOR 56mm dia x 56mm D 56.7mm sq flange with 4-holes, 47mm centers. 6.4mm dia flatted shaft with threaded hole x 17.5mm L 17oz Learn More
  36. Oriental Motors - PH266-01-C11 - Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH.

    Oriental Motors - PH266-01-C11 - Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH.

    $59.95

    Only 2 left in stock!

    Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH. Vexta. Mount: Panel. Flange 2.225" square with four holes at 2.575" centers (each 1.86" each spacing). Dimensions overall 2.236" D round x 2.204" high, plus 1/4" D shaft 0.74" long. Note: Shaft has one side flattened. 6 Wire. Weight: 1.14 lbs. Learn More
  37. PACIFIC SCIENTIFIC - E31NCHT-LEN-PD-00 - Motor, stepper. Hybrid. 35VDC 5.4A 1.8 Deg.

    PACIFIC SCIENTIFIC - E31NCHT-LEN-PD-00 - Motor, stepper. Hybrid. 35VDC 5.4A 1.8 Deg.

    $245.99

    Only 1 left in stock!

    Motor, stepper. Hybrid. 35VDC 5.4Amp 1.8 Deg/Step 88 watt 1500RPM. bipolar-Parallel. Sigmax [Flux Focusing increases torque}. Shaft: 9.6mm/0.38" D shaft x 30mm long, 4-lead parallel. Max torque at low speed 500-PPR w/ line driver. Holding Torque: 223-349-oz-in [1.58~1.90nM]. Nema-34, 3.4" square frame. Two MS connectors; 5 Pijn male and an 8 Pin male. Made in the USA. Learn More
  38. PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00 - 65VDC 176W 1500-RPM 5.1A Bipolar Parallel Stepper Motor

    PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00 - 65VDC 176W 1500-RPM 5.1A Bipolar Parallel Stepper Motor

    $88.00

    Only 2 left in stock!

    65V 5.1A Bipolar parallel Po:176W 5.1A BIPOLAR PARALLEL 1.8DEG/STEP 9.6mm flatted shaft [with threaded hole in end] x 29mmL STEPPER MOTOR 86mm dia x 128mmD 80mm mounting flange, 69mm centers {One has a Pulley attached} 9 pounds Learn More
  39. Philips - A82963-M1 - Motor, stepper. 5V 3.3A .

    Philips - A82963-M1 - Motor, stepper. 5V 3.3A .

    $14.00

    Only 8 left in stock!

    Motor, stepper. 5V 3.3A . 7.5 deg/step. 250 RPM. 4 wires. Mounting: 2.2" hole spacing. Shaft: 1/4" D x 1/2" L. Weight: 25 oz. Very tarnished. ROTARY REV RPM 0-250, PPS 0-200, PERM MAG. New older stock. Learn More
  40. SUPERIOR ELECTRIC CO. - 215851-007 - Cords & Plug sets. For Slo-Syn motors.

    SUPERIOR ELECTRIC CO. - 215851-007 - Cords & Plug sets. For Slo-Syn motors.

    $34.95

    Only 1 left in stock!

    I/O Cable for Slo-Syn motors. BCD I/O cable, 25 pin D, 5 foot (1.5 meters). Learn More
  41. SUPERIOR ELECTRIC CO. - KMT091F05E - Motor, Stepper, Dual-shaft 3V 2.7A NEMA34D

    SUPERIOR ELECTRIC CO. - KMT091F05E - Motor, Stepper, Dual-shaft 3V 2.7A NEMA34D

    $195.00

    Only 1 left in stock!

    Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversable. Wire count: Long wire cable to Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Weight: 5 lbs. Two-phase, single stack. Learn More
  42. SUPERIOR ELECTRIC CO. - M063-CS09E - Motor, stepper. 2.25VDC 4.6A 1.8 Deg.

    SUPERIOR ELECTRIC CO. - M063-CS09E - Motor, stepper. 2.25VDC 4.6A 1.8 Deg.

    $88.00

    Only 1 left in stock!

    Motor, stepper. Synchronous - 2.25VDC 4.6Amp 200 Steps/Rev, 1.8 Degree 150 oz in. Dimensions: 57mm D x 101 mm long. Dual Shaft : 6.6mm x 18mm long. Square flange with 4 holes 47mm centers, 7 pin connector. Class A insulation. May have shelf wear. Learn More
  43. SUPERIOR ELECTRIC CO. - M063-FD09 - SLO-SYN Stepping Motor 2.25VDC

    SUPERIOR ELECTRIC CO. - M063-FD09 - SLO-SYN Stepping Motor 2.25VDC

    $88.00

    WEB UPDATES TO DO

    SLO-SYN Stepper 2.25VDC 4.6A 200Steps/Revolution 100 oz. in. Learn More
  44. SUPERIOR ELECTRIC CO. - M063-FD09C2 - SLO-SYN Stepping Motor. 2.25VDC 4.6A 100-Oz-In

    SUPERIOR ELECTRIC CO. - M063-FD09C2 - SLO-SYN Stepping Motor. 2.25VDC 4.6A 100-Oz-In

    $88.00

    WEB UPDATES TO DO

    Motor, Stepper. Supply: 2.25VDC 4.6A. SLO-SYN Synchronous Stepper. . Torque: 100-Oz-In. Direction: Reversable, 200 Steps per Revolution. Wire count: 6-wires, wired to connector. Dual Shaft. Learn More
  45. SUPERIOR ELECTRIC CO. - M091-FF-206ET - Motor, stepper. Slo-Syn. Supply: 3.0V

    SUPERIOR ELECTRIC CO. - M091-FF-206ET - Motor, stepper. Slo-Syn. Supply: 3.0V

    $124.95

    Only 1 left in stock!

    Motor, stepper. Slo-Syn. Supply: 3.0V. Current: 3.0A. Torque: 180 Oz-in holding. Dual shaft SPEC.A213803. NEMA34D. Learn More
  46. SUPERIOR ELECTRIC CO. - M091-FF-206T - Motor, Stepper, Slo-Syn. Supply: 3.0V

    SUPERIOR ELECTRIC CO. - M091-FF-206T - Motor, Stepper, Slo-Syn. Supply: 3.0V

    $124.95

    Only 2 left in stock!

    Motor, Stepper, Slo-Syn. Supply: 3.0V. Current: 3.0A. Winding Res. 1-ohm 10.4mHy. Torque: 180 Oz-In Holding. Wire count: 4 leads. Frame Size: 90mm. Mech. Mtg. NEMA 34D. SPEC. A213803. Learn More
  47. SUPERIOR ELECTRIC CO. - M111-FD-302 - SLO-SYN Stepper 6.93VDC 300-Oz-In

    SUPERIOR ELECTRIC CO. - M111-FD-302 - SLO-SYN Stepper 6.93VDC 300-Oz-In

    $289.00

    Only 1 left in stock!

    Motor, Stepper SLO-SYN. Supply: 6.93VDC 1.5A . Steps: 200 steps/revolution . Torque: 300-Oz-In. Mech. Mtg: 3-hole mounting 2.8" spacing. Body Dimensions: 110mm NEMA 42. Shaft: 0.38"D Learn More
  48. SUPERIOR ELECTRIC CO. - SS250-1002 - Motor, Slo-Syn stepper 9VDC 1.5A 225-Oz-In.

    SUPERIOR ELECTRIC CO. - SS250-1002 - Motor, Slo-Syn stepper 9VDC 1.5A 225-Oz-In.

    $75.00

    Only 6 left in stock!

    Motor, Slo-Syn stepper. Supply: 9VDC. N/P Current: 1.53A . Steps: 200 steps/revolution. Torque: 225 Oz-In. Direction: reversible. Wire count: 6. Mech. Mtg: 3-hole mounted to 4-hole plate. Shaft: has a removable pulley attached. Weight: 8 lbs. Learn More

Items 1 to 48 of 85 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction