Stepper Motor

Page:
  1. 1
  2. 2
  3. 3
  1. AIRPAX - L82401-P2 - Motor, stepper. 12VDC 52 ohm.

    AIRPAX - L82401-P2 - Motor, stepper. 12VDC 52 ohm.

    $9.95

    IN STOCK - MORE THAN 100 READY TO SHIP!

    Motor, stepper. 12VDC 52 ohm. 7.5 deg/step. 6 wires. Mounting: 1-3/8" hole spacing. Body: 42mm D. Shaft: 2.9mm D x 9.6mm L. Mount plate, 4 holes, 35mm centers. Weight: 4.8 oz. Learn More
  2. PORTESCAP - GC26M048A30V - Motor, stepper. 5V, 10:1 gear box, 4 Phase 6 wire.

    PORTESCAP - GC26M048A30V - Motor, stepper. 5V, 10:1 gear box, 4 Phase 6 wire.

    $14.95

    IN STOCK - MORE THAN 100 READY TO SHIP!

    Motor, stepper. 5V miniature, with heavy 10:1 gear box. 4-Phase 6-wire UniPolar, only 1.1" [28mm] x 1.43" [36.2] x 1" [25.4] high with 3mm knurled shaft 7.5mm long. Mounts on two threaded holes on 30mm centers. Rohs compliant. Note: Danaher / Portescap. Weight: 1.8 oz. Learn More
  3. Airpax - A82454-M3 - Motor, stepper. 5VDC1.125 Deg/Step 0-400RPM 0-320P/Sec.

    Airpax - A82454-M3 - Motor, stepper. 5VDC1.125 Deg/Step 0-400RPM 0-320P/Sec.

    IN STOCK - MORE THAN 100 READY TO SHIP!

    Motor, stepper. Supply: 5VDC. Speed: 0-400. Winding Res: 15 Ohm. Steps: 1.125 Deg/Step. Wire count: 6 leads. Mech. Mtg: Two (2) mounting holes 2.38"apart. Body Dimensions: 2.12" x 2.75" x 1.4" with gear attached to 1/8" shaft. Weight: 7 oz. Note: 0-320P/Sec, 3.5 watt. Rotation: reversible. Learn More
  4. AIRPAX - 82227/B82359 - Motor, stepper. 12VDC 2 phase 37 ohm.

    AIRPAX - 82227/B82359 - Motor, stepper. 12VDC 2 phase 37 ohm.

    IN STOCK - MORE THAN 1,000 READY TO SHIP!

    Motors, stepper. Simple 2-phase, 12VDC 48 Step/Rev 7.5deg/step, 37 Ohm Bipolar windings. Dimensions: 35mm, 1.38" D. Attached: 4 wire, 16 inches long. Mounts 1.7" 42mm hole spacing, includes a 15-tooth 1/4" dia nylon gear. Running rate to 1800 step/sec. Weight: 2.6 oz. Learn More
  5. Applied Motion Products Inc - 4017-838 - Stepper Motor 12V 3.6Deg 4-Phase

    Applied Motion Products Inc - 4017-838 - Stepper Motor 12V 3.6Deg 4-Phase

    $8.99

    IN STOCK - MORE THAN 100 READY TO SHIP!

    12VDC Stepper Motors 0.16Amp 100 Steps/Rev 3.6Deg/Step 4-Phase75-Ohm , MPI SPEC# 77619324 made in Japan 42mm sq x 33mm deep 2-slots 62mm apart on 55x78mm flange 4.9x11.1mm shaft Learn More
  6. SEIKO EPSON - EM462 - Stepper motor 42mm Dia 4-wire

    SEIKO EPSON - EM462 - Stepper motor 42mm Dia 4-wire

    $4.95

    IN STOCK - MORE THAN 100 READY TO SHIP!

    Stepper motor for Epson 4-Wire Two 9-Ohm Coils on ribbon cable - 1.65"/42mm Diameter - 24mm tall - mounts on two holes 50mm apart - gear on 2.9mm shaft is 8mm Diameter - NEW Learn More
  7. SUPERIOR ELECTRIC CO. - MP70-9A-Z9-9Z-017 - Motor, stepper. 5.2VDC 1.44Amp.

    SUPERIOR ELECTRIC CO. - MP70-9A-Z9-9Z-017 - Motor, stepper. 5.2VDC 1.44Amp.

    $10.99

    IN STOCK - MORE THAN 100 READY TO SHIP!

    Motor, stepper. 5.2VDC 1.44Amp. 48 step/rev. Mounting: 2.28" hole spacing. Body: 2-3/4" D x 1.7" L. Shaft: 1/4" D x .6" L w/ flat. Shaft: 0.25" shaft w/flat 5/8" long, 2.75"square mounting plate with 4 holes with threaded inserts, about 2.28" apart. Weight: 1.5 lb (23 oz). High torque. Note: Slo-Syn. 8-wire 4-winding. Very High Torque. Learn More
  8. SUPERIOR ELECTRIC CO. - MP70-1A-A4-9Z-025 - Motor, stepper. 15V 4 phase 0.49Amp.

    SUPERIOR ELECTRIC CO. - MP70-1A-A4-9Z-025 - Motor, stepper. 15V 4 phase 0.49Amp.

    $12.95

    READY TO SHIP - ONLY 55 LEFT IN STOCK!

    Motor, stepper. 15V 4 phase 0.49Amp. 48 step/rev. 8 wires. Mounting: 2.2" hole spacing. Body: 2.75" square (70.5mm) x 1.75" high (46mm). Shaft: 1/4" D x 0.63" L. Weight: 1.3 lbs (22 oz). Note: Slo-Syn. Very compact for amount of torque. 8-wire = 4-phase = Unipolar. Learn More
  9. AIRPAX - L82101-P2 - Motor, stepper. 12V 118 ohm.

    AIRPAX - L82101-P2 - Motor, stepper. 12V 118 ohm.

    $9.00

    READY TO SHIP - ONLY 11 LEFT IN STOCK!

    Motor, stepper. 12V 118 ohm. 15 deg/step. 6 wires. Mounting: 1-3/8" hole spacing. Body: 1"D (25.5mm) x 1/2" (12.6mm) deep, with 35mm mount centers. Shaft: 1.7mm D x 8.7mm L. Weight: 1 oz. Learn More
  10. LEDEX - 5945-636-5462 - Motor, stepper. Supply: 48VDC.

    LEDEX - 5945-636-5462 - Motor, stepper. Supply: 48VDC.

    $27.50

    READY TO SHIP - ONLY 19 LEFT IN STOCK!

    Motor, stepper with switch. Supply: 48VDC. Body Dimensions: 1.90"D x 2.74"H. Weight: 12oz. With wafer switch. Military NL-71277-3-2, B-61986-A Learn More
  11. MATSUSHITA - 55SI-25DAWC - Motor, stepper. 12V 36 Ohm 7.5 Deg 6 Wire.

    MATSUSHITA - 55SI-25DAWC - Motor, stepper. 12V 36 Ohm 7.5 Deg 6 Wire.

    $5.99

    READY TO SHIP - ONLY 54 LEFT IN STOCK!

    Motor, stepper. 12V 36 Ohm 7.5 Deg 6 Wire. Dimensions: 2.042" (51.8mm) D body, overall with mount 3.138" (79.7mm) long. Heatsink is 2.955" (75.0mm) wide x 1.027" (26.00mm) high. Shaft 1/4" half flat x 0.750" (19.0mm) long. Please note: With attached 6 position female header connector. Silicon grease is between the motor the heatsink. Weight 11 oz. Manufactured by Matsushita for Coleco Adam. Learn More
  12. SUPERIOR ELECTRIC CO. - PDT500-1001 - SLO-SYN Positioning System

    SUPERIOR ELECTRIC CO. - PDT500-1001 - SLO-SYN Positioning System

    $495.00

    READY TO SHIP - ONLY 2 LEFT IN STOCK!

    SLO-SYN Positioning System. Stepper motor Drive combined with a Micro-series Indexer. New, in box with manual. Learn More
  13. Warner Electric / Superior - KMT091F05E - Stepper, Dual-shaft 3VDC 2.7A 200S/Rev

    Warner Electric / Superior - KMT091F05E - Stepper, Dual-shaft 3VDC 2.7A 200S/Rev

    $250.00

    READY TO SHIP - ONLY 5 LEFT IN STOCK!

    Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversible. Wire count: Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Two-phase, single stack. Weight: 5 lbs. Warner Electric / Superior Learn More
  14. AIRPAX - A82352-M3 - 18deg 1.5-In-Oz 42mm 4-wire

    AIRPAX - A82352-M3 - 18deg 1.5-In-Oz 42mm 4-wire

    $5.95

    READY TO SHIP - ONLY 25 LEFT IN STOCK!

    Stepper, 18 Deg/Step, 1.5 in-oz, 4 wires, Mounting 2 holes 42mm apart, Body 37x50x20mm thick, Shaft 2x8mm with4.6mm gear,2.6 oz, 4.6mm 10-toothGear. Learn More
  15. Applied Motion Products Inc - 5023-169D - Motor, stepper. Dual shaft, 8 Wire.

    Applied Motion Products Inc - 5023-169D - Motor, stepper. Dual shaft, 8 Wire.

    $49.00

    READY TO SHIP - ONLY 1 LEFT IN STOCK!

    Motor, stepper. Dual shaft, 8 Wire. Max phase current: Series 1.70Amp Parallel 3.40Amp. Mount: Panel, 47mm centers. Body: 56mm D x 141mm long. Shaft(s) 6.4mm D x 19mm long. Weight: 2.9 lbs. Learn More
  16. ARC SYSTEMS - 2015-02 - Arcustep 24VDC stepper motor

    ARC SYSTEMS - 2015-02 - Arcustep 24VDC stepper motor

    $15.00

    READY TO SHIP - ONLY 6 LEFT IN STOCK!

    Arcustep 24VDC - step angle 15 Deg Servo-mount 50.7mm dia x 75mm long, Plus 11.1mm dia worm gear 111mm long - 6.7mm dia shaft 9.3mm Long at rear. Four wire teflon leads. Measured resistance is either 20 or 40-Ohms fron one wire to any other wire Learn More
  17. Eastern Air Devices - LA23BCK-47 - 6VDC 1.8degree 4-Ph 6-wire Stepper

    Eastern Air Devices - LA23BCK-47 - 6VDC 1.8degree 4-Ph 6-wire Stepper

    $69.95

    READY TO SHIP - ONLY 5 LEFT IN STOCK!

    6VDC 1.25Amp 1.8degree 4-Phase 6-teflon 15"wires Stepper Motor 2.25"D x 3.0"L 4-hole mounting 1.85" spacing 0.25"D shaft 0.75"L New, Old Stock weighs 2-pounds Learn More
  18. FDK - E02A1ZD - Stepper Motor 4-Wire very thin 42x14mm

    FDK - E02A1ZD - Stepper Motor 4-Wire very thin 42x14mm

    $5.95

    READY TO SHIP - ONLY 25 LEFT IN STOCK!

    42mm dia x 14.5mm thick, 2.9mm shaft 11mmL with 6.2mm 10-tooth brass Gear 4-hole plate, 35mm centers Stepper Motor 4-Wires, 19"long very thin 3.6oz Learn More
  19. HURST - 3007-001 ABS - 12VDC 6-wire 15-degree Stepper

    HURST - 3007-001 ABS - 12VDC 6-wire 15-degree Stepper

    $58.95

    READY TO SHIP - ONLY 2 LEFT IN STOCK!

    12VDC 4.25W 6-lead Bifilar 15-degree Stepper Model #ABS Part #3007-001 Reduction: DD - Volts: 12DC Step Angle: 15-degrees. Mounts with two holes on 2.38" centers, pear shaped gear cup Instrument Motor 0.125" shaft half an inch long. Some instructions supplied. Learn More
  20. Oriental Motors - PH266-01-C11 - Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH.

    Oriental Motors - PH266-01-C11 - Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH.

    $59.95

    READY TO SHIP - ONLY 2 LEFT IN STOCK!

    Motor, stepper. 6VDC 1.2Amp 1.8 Degree/Step 2PH. Vexta. Mount: Panel. Flange 2.225" square with four holes at 2.575" centers (each 1.86" each spacing). Dimensions overall 2.236" D round x 2.204" high, plus 1/4" D shaft 0.74" long. Note: Shaft has one side flattened. 6 Wire. Weight: 1.14 lbs. Learn More
  21. PACIFIC SCIENTIFIC - E31NCHT-LEN-PD-00 - Motor, stepper. Hybrid. 35VDC 5.4A 1.8 Deg.

    PACIFIC SCIENTIFIC - E31NCHT-LEN-PD-00 - Motor, stepper. Hybrid. 35VDC 5.4A 1.8 Deg.

    $245.99

    READY TO SHIP - ONLY 1 LEFT IN STOCK!

    Motor, stepper. Hybrid. 35VDC 5.4Amp 1.8 Deg/Step 88 watt 1500RPM. bipolar-Parallel. Sigmax [Flux Focusing increases torque}. Shaft: 9.6mm/0.38" D shaft x 30mm long, 4-lead parallel. Max torque at low speed 500-PPR w/ line driver. Holding Torque: 223-349-oz-in [1.58~1.90nM]. Nema-34, 3.4" square frame. Two MS connectors; 5 Pijn male and an 8 Pin male. Made in the USA. Learn More
  22. PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00 - 65VDC 176W 1500-RPM 5.1A Bipolar Parallel Stepper Motor

    PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00 - 65VDC 176W 1500-RPM 5.1A Bipolar Parallel Stepper Motor

    $88.00

    READY TO SHIP - ONLY 2 LEFT IN STOCK!

    65V 5.1A Bipolar parallel Po:176W 5.1A BIPOLAR PARALLEL 1.8DEG/STEP 9.6mm flatted shaft [with threaded hole in end] x 29mmL STEPPER MOTOR 86mm dia x 128mmD 80mm mounting flange, 69mm centers {One has a Pulley attached} 9 pounds Learn More
  23. SUPERIOR ELECTRIC CO. - 215851-007 - Cords & Plug sets. For Slo-Syn motors.

    SUPERIOR ELECTRIC CO. - 215851-007 - Cords & Plug sets. For Slo-Syn motors.

    $34.95

    READY TO SHIP - ONLY 1 LEFT IN STOCK!

    I/O Cable for Slo-Syn motors. BCD I/O cable, 25 pin D, 5 foot (1.5 meters). Learn More
  24. SUPERIOR ELECTRIC CO. - M111-FD-302 - SLO-SYN Stepper 6.93VDC 300-Oz-In

    SUPERIOR ELECTRIC CO. - M111-FD-302 - SLO-SYN Stepper 6.93VDC 300-Oz-In

    $289.00

    READY TO SHIP - ONLY 1 LEFT IN STOCK!

    Motor, Stepper SLO-SYN. Supply: 6.93VDC 1.5A . Steps: 200 steps/revolution . Torque: 300-Oz-In. Mech. Mtg: 3-hole mounting 2.8" spacing. Body Dimensions: 110mm NEMA 42. Shaft: 0.38"D Learn More

Page:
  1. 1
  2. 2
  3. 3

Back to top